Browse > Article
http://dx.doi.org/10.12989/eas.2020.18.2.263

Computing input energy response of MDOF systems to actual ground motions based on modal contributions  

Ucar, Taner (Department of Architecture, Dokuz Eylul University)
Publication Information
Earthquakes and Structures / v.18, no.2, 2020 , pp. 263-273 More about this Journal
Abstract
The use of energy concepts in seismic analysis and design of structures requires the understanding of the input energy response of multi-degree-of-freedom (MDOF) systems subjected to strong ground motions. For design purposes and non-time consuming analysis, however, it would be beneficial to associate the input energy response of MDOF systems with those of single-degree-of-freedom (SDOF) systems. In this paper, the theoretical formulation of energy input to MDOF systems is developed on the basis that only a particular portion of the total mass distributed among floor levels is effective in the nth-mode response. The input energy response histories of several reinforced concrete frames subjected to a set of eleven horizontal acceleration histories selected from actual recorded events and scaled in time domain are obtained. The contribution of the fundamental mode to the total input energy response of MDOF frames is demonstrated both graphically and numerically. The input energy of the fundamental mode is found to be a good indicator of the total energy input to two-dimensional regular MDOF structures. The numerical results computed by the proposed formulation are verified with relative input energy time histories directly computed from linear time history analysis. Finally, the elastic input energies are compared with those computed from time history analysis of nonlinear MDOF systems.
Keywords
input energy response history; time history analysis; MDOF system; nth-mode SDOF system; fundamental mode;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Gharehbaghi, S., Gandomi, A.H., Achakpour, S. and Omidvar, M.N. (2018), "A hybrid computational approach for seismic energy demand prediction", Expert Syst. Appl., 110, 335-351. https://doi.org/10.1016/j.eswa.2018.06.009.   DOI
2 Gullu, A., Yuksel, E., Yalcin, C., Anil Dindar, A. and Ozkaynak, H. (2017), "Experimental verification of the elastic input energy spectrum and a suggestion", Proceedings of the Interdisciplinary Perspectives for Future Building Envelopes, Istanbul, Turkey, May.
3 Gullu, A., Yuksel, E., Yalcin, C., Anil Dindar, A., Ozkaynak, H. and Buyukozturk, O. (2019), "An improved input energy spectrum verified by the shake table tests", Earthq. Eng. Struct. Dyn., 48(1), 27-45. https://doi.org/10.1002/eqe.3121.   DOI
4 Habibi, A., Chan, R.W.K. and Albermani, F. (2013), "Energy-based design method for seismic retrofitting with passive energy dissipation systems", Eng. Struct., 46, 77-86. https://doi.org/10.1016/j.engstruct.2012.07.011.   DOI
5 Hori, N. and Inoue, N. (2002), "Damaging properties of ground motions and prediction of maximum response of structures based on momentary energy response", Earthq. Eng. Struct. Dyn., 31(9), 1657-1679. https://doi.org/10.1002/eqe.183.   DOI
6 Kalkan, E. and Kunnath, S.K. (2007), "Effective cyclic energy as a measure of seismic demand", J. Earthq. Eng., 11(5), 725-751. http://dx.doi.org/10.1080/13632460601033827.   DOI
7 Kalkan, E. and Kunnath, S.K. (2008), "Relevance of absolute and relative energy content in seismic evaluation of structures", Adv. Struct. Eng., 11(1), 17-34. https://doi.org/10.1260/136943308784069469.   DOI
8 Ganjavi, B. and Rezagholilou, A.R. (2018), "An intensity measure for seismic input energy demand of multi-degree-of-freedom systems", Civ. Eng. Infrastruct. J., 51(2), 373-388. https://doi.org/10.7508/ceij.2018.02.008.
9 Shargh, F.H., Hosseini, M. and Daneshvar, H. (2012), "An optimal distribution of stiffness over the height of buildings and its influence on the degree and distribution of earthquake induced damages and distribution of earthquake induced damages", 15th World Conference on Earthquake Engineering, Lisboa, Portugal, September.
10 Shargh, F.H. and Hosseini, M. (2011), "An optimal distribution of stiffness over the height of shear buildings to minimize the seismic input energy", J. Seismol. Earthq. Eng., 13(1), 25-32.
11 Shiwua, A.J., Rutman, Y. (2016), "Assessment of seismic input energy by means of new definition and the application to earthquake resistant design", Archit. Eng., 1(4), 26-35. https://doi.org/10.23968/2500-0055-2016-1-4-26-35.
12 Surahman, A. (2007), "Earthquake-resistant structural design through energy demand and capacity", Earthq. Eng. Struct. Dyn., 36(14), 2099-2117. https://doi.org/10.1002/eqe.718.   DOI
13 Taflampas, I.M., Maniatakis, Ch.A. and Spyrakos, C.C. (2008), "Estimation of input seismic energy by means of a new definition of strong motion duration duration", The 14th World Conference on Earthquake Engineering, Beijing, China, October.
14 Takewaki, I. (2004), "Frequency domain modal analysis of earthquake input energy to highly damped passive control structures", Earthq. Eng. Struct. Dyn., 33(5), 575-590. https://doi.org/10.1002/eqe.361.   DOI
15 Takewaki, I. and Fujita, K. (2009), "Earthquake input energy to tall and base-isolated buildings in time and frequency dual domains", Struct. Des. Tall Spec. Build., 18(6), 589-606. https://doi.org/10.1002/tal.497.   DOI
16 Lei, C., Xianguo, Y. and Kangning, L. (2008), "Analysis of seismic energy response and distribution of RC frame structures", The 14th World Conference on Earthquake Engineering, Beijing, China, October.
17 Kanno, H., Nishida, T. and Kobayashi, J. (2012), "Estimation method of seismic response based on momentary input energy considering hysteresis shapes of a building structure", 15th World Conference on Earthquake Engineering, Lisboa, Portugal, September.
18 Karimzadeh, S., Ozsarac, V., Askan, A., and Erberik, M.A. (2019). "Use of simulated ground motions for the evaluation of energy response of simple structural systems", Soil Dyn. Earthq. Eng., 123,525-542. https://doi.org/10.1016/j.soildyn.2019.05.024.   DOI
19 Khashaee, P., Mohraz, B., Sadek, F., Lew, H.S. and Gross, J.L. (2003), "Distribution of earthquake input energy in structures", Report No. NISTIR 6903, National Institute of Standards and Technology, Gaithersburg.
20 Takewaki, I. and Tsujimoto, H. (2011), "Scaling of design earthquake ground motions for tall buildings based on drift and input energy demands", Earthq. Struct., 2(2), 171-187. https://doi.org/10.12989/eas.2011.2.2.171.   DOI
21 ASCE (2014). Seismic evaluation and retrofit of existing buildings (ASCE 41-13), American Society of Civil Engineers; Reston, Virginia, U.S.A.
22 Alici, F.S. and Sucuoglu, H. (2016), "Prediction of input energy spectrum: attenuation models and velocity spectrum scaling", Earthq. Eng. Struct. Dyn., 45(13), 2137-2161. https://doi.org/10.1002/eqe.2749.   DOI
23 Alici, F.S. and Sucuoglu, H. (2018), "Elastic and inelastic near-fault input energy spectra", Earthq. Spectra, 34(2), 611-637. https://doi.org/10.1193/090817EQS175M.   DOI
24 Amiri, G.G., Darzi, G.A. and Amiri, J.V. (2008), "Design elastic input energy spectra based on Iranian earthquakes", Can. J. Civ. Eng., 35(6), 635-646. https://doi.org/10.1139/L08-013.   DOI
25 Beiraghi, H. (2018), "Energy dissipation of reinforced concrete wall combined with buckling-restrained braces subjected to near- and far-fault earthquakes", Iran. J. Sci. Technol., Trans. Civ. Eng., 42(4), 345-359. https://doi.org/10.1007/s40996-018-0109-0.   DOI
26 Benavent-Climent, A., Pujades, L.G. and Lopez-Almansa, F. (2002), "Design energy input spectra for moderate-seismicity regions", Earth. Eng. Struct. Dyn., 31(5), 1151-1172. https://doi.org/10.1002/eqe.153.   DOI
27 Benavent-Climent, A., Lopez-Almansa, F. and Bravo-Gonzalez, D.A. (2010), "Design energy input spectra for moderate-to-high seismicity regions based on Colombian earthquakes", Soil Dyn. Earthq. Eng., 30(11), 1129-1148. https://doi.org/10.1016/j.soildyn.2010.04.022.   DOI
28 Merter, O. (2019), "An investigation on the maximum earthquake input energy for elastic SDOF systems", Earthq. Struct., 16(4), 487-499. https://doi.org/10.12989/eas.2019.16.4.487.   DOI
29 Lopez-Almansa, F., Yazgan, A.U. and Benavent-Climent, A. (2013), "Design energy input spectra for high seismicity regions based on Turkish registers", Bull. Earthq. Eng., 11(4): 885-912. https://doi.org/10.1007/s10518-012-9415-2.   DOI
30 Manfredi, G. (2001), "Evaluation of seismic energy demand", Earthq. Eng. Struct. Dyn., 30(4), 485-499. https://doi.org /10.1002/eqe.17.   DOI
31 Mezgebo, M.G. (2015), "Estimation of earthquake input energy, hysteretic energy and its distribution in MDOF structures", Ph.D. Dissertation, Syracuse University, New York.
32 Mezgebo, M. and Lui, E.M. (2016), "Hysteresis and soil site dependent input and hysteretic energy spectra for far-source ground motions", Adv. Civ. Eng., 2016, https://doi.org/10.1155/2016/1548319.
33 Yang, T.Y., Tung, D.P., and Li, Y. (2018), "Equivalent energy design procedure for earthquake resilient fused structures", Earthq. Spectra, 34(2), 795-815. https://doi.org/10.1193/122716EQS254M.   DOI
34 Tselentis, G-A., Danciu, L. and Sokos, E. (2010), "Probabilistic seismic hazard assessment in Greece - Part 2: Acceleration response spectra and elastic input energy spectra", Nat. Hazards Earth Syst. Sci., 10(1), 41-49. https://doi.org/10.5194/nhess-10-41-2010.   DOI
35 TSDC (2018). Turkish seismic design code, Ministry of Public Works and Settlement; Ankara, Turkey.
36 Wong, K.K.F. and Yang, R. (2002), "Earthquake response and energy evaluation of inelastic structures", J. Eng. Mech., 128(3), 308-317. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:3(308).   DOI
37 Ye, L., Cheng, G. and Qu, Z. (2009), "Study on energy-based seismic design method and the application for steel braced frame structures", Sixth International Conference on Urban Earthquake Engineering, Tokyo Institute of Technology, Tokyo, Japan, March.
38 Zhou, Y., Song, G., Huang, S. and Wu, H. (2019), "Input energy spectra for self-centering SDOF systems", Soil Dyn. Earthq. Eng., 121, 293-305. https://doi.org/10.1016/j.soildyn.2019.03.017.   DOI
39 Mezgebo, M.G. and Lui, E.M. (2017), "A new methodology for energy-based seismic design of steel moment frames", Earthq. Eng. Eng. Vib., 16(1), 131-162. https://doi.org/10.1007/s11803-017-0373-1.   DOI
40 Bommer, J.J. and Martinez-Pereira, A. (1999), "The effective duration of earthquake strong motion", J. Earthq. Eng., 3(2), 127-172. https://doi.org/10.1080/13632469909350343.   DOI
41 Mollaioli, F., Bruno, S., Decanini,L. and Saragoni, R. (2011), "Correlations between energy and displacement demands for performance-based seismic engineering", Pure Appl. Geophys., 168(1-2), 237-259. https://doi.org/10.1007/s00024-010-0118-9.   DOI
42 Morales-Beltran, M., Turan, G., Yildirim, U., and Paul, J. (2018), "Distribution of strong earthquake input energy in tall buildings equipped with damped outriggers", Struct. Des. Tall Spec. Build., 27(8), e1463. https://doi.org/10.1002/tal.1463.   DOI
43 Chou, C.C. and Uang, C.M. (2004), "Evaluating distribution of seismic energy in multistory frames", 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August.
44 Cheng, Y., Lucchini, A. and Mollaioli, F. (2014), "Proposal of new ground motion prediction equations for elastic input energy spectra", Earthq. Struct., 7(4), 485-510. https://doi.org/10.12989/eas.2014.7.4.485.   DOI
45 Chopra, A.K. (2012), Dynamics of Structures, Theory and Applications to Earthquake Engineering, Prentice Hall, One Lake Street, Upper Saddle River, N.J. U.S.A.
46 Chou, C.C. and Uang, C.M. (2003), "A procedure for evaluating seismic energy demand of framed structures", Earthq. Eng. Struct. Dyn., 32(2), 229-244. https://doi.org/10.1002/eqe.221.   DOI
47 Decanini, L.D. and Mollaioli, F. (1998), "Formulation of elastic earthquake input energy spectra", Earthq. Eng. Struct. Dyn., 27(12), 1503-1522, https://doi.org/10.1002/(SICI)1096-9845(199812)27:12<1503::AID-EQE797>3.0.CO;2-A.   DOI
48 Decanini, L., Mollaioli, F. and Mura, A. (2001), "Equivalent SDOF systems for the estimation of seismic response of multistory frame structures", WIT Trans. Built Environ., 57, 101-110. https://doi.org/ 10.2495/ERES010101.
49 Decanini, L.D. and Mollaioli, F. (2001), "An energy-based methodology for the assessment of seismic demand", Soil Dyn. Earthq. Eng., 21(2), 113-137. https://doi.org/10.1016/S0267-7261(00)00102-0.   DOI
50 Okur, A. and Erberik, M.A. (2012), "Adaptation of energy principles in seismic design of Turkish RC frame structures. Part I: Input energy spectrum", 15th World Conference on Earthquake Engineering, Lisboa, Portugal, September.
51 Ordaz, M., Huerta, B. and Reinoso, E. (2003), "Exact computation of input-energy spectra from Fourier amplitude spectra", Earthq. Eng. Struct. Dyn., 32(4), 597-605. https://doi.org/10.1002/eqe.240.   DOI
52 Ozsarac, V., Karimzadeh, S., Erberik, M.A., Askan, A. (2017), "Energy-based response of simple structural systems by using simulated ground motions", Procedia Eng., 199, 236-241. https://doi.org/10.1016/j.proeng.2017.09.009.   DOI
53 PEER (2019), PEER Ground Motion Database, NGA-West2. Pacific Earthquake Engineering Research Center. http://ngawest2.berkeley.edu/
54 PRISM for Earthquake Engineering. (2010), A Software for Seismic Response Analysis of Single-Degree-of-Freedom-Systems, Version 2.0.1, Department of Architectural Engineering, INHA University.
55 Quinde, P., Reinoso, E. and Teran-Gilmore, A. (2016), "Inelastic seismic energy spectra for soft soils: Application to Mexico City", Soil Dyn. Earthq. Eng., 89, 198-207. https://doi.org/10.1016/j.soildyn.2016.08.004.   DOI
56 Sari, A. (2003), "Energy considerations in ground motion attenuation and probabilistic seismic hazard studies", Ph.D. Dissertation, The University of Texas at Austin, Austin. U.S.A.
57 Dindar, A.A., Yalcin, C., Yuksel, E., Ozkaynak H. and Buyukozturk, O. (2015), "Development of earthquake energy demand spectra", Earthq. Spectra, 31(3), 1667-1689. https://doi.org/10.1193/011212EQS010M.   DOI
58 EC8 (2004), Eurocode 8: Design of structures for earthquake resistance-part 1: General rules, seismic actions and rules for buildings, European Committee for Standardization; Brussels, Belgium.
59 SAP2000 Ultimate. (2018), Integrated Solution for Structural Analysis and Design, Version 20.2.0, Computers and Structures Inc. (CSI), Berkeley, California, U.S.A.