• 한국물환경학회지
• /
• 제33권6호
• /
• pp.722-727
• /
• 2017

Livestock manure is known to be the main cause of non-point pollution in agricultural areas. The pollutant reduction ratio of livestock manure recycling to fertilizers was measured in order to analyze the effect on the water quality of the Total Maximum Daily Load (TMDL) system in Korea. The reduction ratio has been applied by theoretical consideration without a survey, and there is no value for Total Organic Carbon (TOC) newly introducing any organic items. The reduction ratio of each pollutant from this study was revealed as follows: TOC, BOD, T-N and T-P were 0.34, 0.60, 0.37, and 0.42 for individual farm and 0.38, 0.61, 0.45 and 0.44 for entrustment facilities, respectively. The reduction ratio of individual farm was surveyed as TOC 0.63, BOD 0.62, T-N 0.42 and T-P 0.32 for liquid fertilizer, and TOC 0.30, BOD 0.64, T-N 0.40 and T-P 0.48 for compost. The total reduction ratio was derived by multiplying the ratio for liquid fertilizer and compost by the respective load. Compared to the pollutant reduction ratio of the individual farm with entrustment facilities marking the higher in liquid fertilizer and the lower in compost. Through this study, we found the difference of pollutant reduction ratio between a livestock manure recycling process and facilities. Although phosphorus is known as a preservative matter, the treatment efficiency of T-P is analyzed to decrease by chemical precipitation.

• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.103-109
• /
• 2002

The paper investigates the change of frequency response characteristics on two-stage gear reduction servo system according to the variation of backlash amount of each gear reduction stage, under the condition that the backlash of total system is constant. It is shown that the frequency response characteristics of the system heavily depend on the contribution ratio which is defined as a ratio of the first backlash amount to the total backlash. It is also found that there is an optimal backlash combination to maximize the bandwidth of two-stage gear reduction servo system when the allowable total backlash is determined.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 춘계학술대회 논문집
• /
• pp.46-48
• /
• 1988

The effect of cold reduction ratio on magnetic properties of 45% Ni-Fe permalloy was studied. To know the relationship between the crystal orientation and the magnetic properties, the pole figure was measured by X-ray diffraction method. In the case of single rolled reduction, the coercive force decreased with cold reduction ratio monotonically, but the maximum permeability, induction and squreness increased drastically. In the case of double rolled reduction (total reduction ratio is 90%), the saturation and residual induction increased slightly with secondary reduction ratio, but the maximum permeability and the coercive force had the maximum and the minimum value at the 50/50% reduction ratio respectively. And strong {100} <100> pole was developed by increasing the cold reduction ratio.

• 대한기계학회논문집
• /
• 제3권3호
• /
• pp.124-131
• /
• 1979

An optimim reduction gear ratio problem for a subway rapid transit car in Seoul was solved by using a computer program package, which is a modified and extened version of the simple model by Mischke. The optimum value of reduction gear ratio was evaluated by minimizing the total start-to stop time.The validity of the computer program package was verified by cross-checking the calculated values of gear ratio and dynamic characteristics with the actual and measured values.

• 상하수도학회지
• /
• 제23권5호
• /
• pp.669-678
• /
• 2009

The reduction of excess activated sludge from petrochemical plant was investigated by the electro fenton (E-Fenton) process using electrogenerated hydroxyl radicals which lead to mineralization of activated sludge to $CO_2$, water and inorganic ions. Factors affecting the disintegration efficiency of excess activated sludge in E-Fenton process were examined in terms of five criteria: pH, $H_2O_2/Fe^{2+}$ molar ratio, current density, initial MLSS (mixed liquid suspended solids) concentration, $H_2O_2$ feeding mode. TSS total suspended solid and $TCOD_{cr}$ reduction rate increased with the increasing $H_2O_2/Fe^{2+}$ molar ratio and current density until 42 and $6.7 mA/cm^2$, respectively but further increase of $H_2O_2/Fe^{2+}$ molar ratio and current density would reduce the reduction rate. On the other hand, as expected, increasing pH and initial MLSS concentration of activated sludge decreas TSS and $TCOD_{cr}$ reduction rate. The E-Fenton process was gradually increased during first 30 minutes and then linearly proceed till 120 minutes. The optimal E-Fenton condition showed TSS reduction rate of 62~63% and $TCOD_{cr}$ (total chemical oxygen demand) reduction rate of 55~56%. Molar ratio $H_2O_2/Fe^{2+} = 42$ was determined as optimal E-Fenton condition with initial $Fe^{2+}$ dose of 5.4 mM and current density of $6.7{\sim}13.3 mA/cm^2$, initial MLSS of 7,600 mg/L and pH 2 were chosen as the most efficient E-Fenton condition.

• 약학회지
• /
• 제45권5호
• /
• pp.468-475
• /
• 2001

Fenofibrate is a fibric acid derivative that is a strong reducer of triglyceride. Micronozed formulation of fenofibrate has improved bioavailability compared to non-micrornized formulation. This study performed a retrospective comparison of micrornized and non-micrornized fenofibrate (28 in micronized and 51 in non-micronized group) by comparing the means of changes in total triglyceride, total cholesterol, HDL-cholesterol and TC/HDL ratio in type 2 diabetics with dyslipidemia The result skewed that after 12 weeks of treatment both drugs produced a significant reduction in total triglyceride levels (62% with micronized, 37% with non-micronized). The mean decrease observed for total triglyceride levels were significantly lower for micronized fenofibrate (p<0.001). Both drugs showed a significant reduction for total cholesterol levels (-22% with micronized, -14% with non-micronized fenofibrate). The mean decrease observed for total cholesterol was not significantly different between the two drugs (p>0.05). HDL-cholesterol levels increased by 24% and 15%) with micronized and non-micronized, respectively and the differences from the baseline were statistically significant for both drugs (p<0.05). The mean change of HDL-cholesterol was not significantly different between the two drugs. There was a statistically significant reduction in TC/HBL-cholesterol ratio from baseline for both drugs (7.1 to 4.8 with micronized and 5.1 to 4.5 with non-micronized), and the reduction of TC/HDL-cholesterol ratio tended to be significantly greater with micronized fenofibrate (p<0.05). This study shows that short-term treatment with micronized fenofibrate is more effective than non-micronized fenosbrate in type 2 diabetes patients with dyslipidemia.

• 한국연초학회지
• /
• 제9권1호
• /
• pp.27-33
• /
• 1987

This study was carried out to investigate the effect of cultural practices on the nicotine and sugar contents in flue-cured tobacco(NC82), and the relationship between them. Significant reduction I sugar content and ratio of total sugar to nicotine(ratio, S/N) were observed with increased fertilizer, lower topping height, late transplanting and decreased application of male hydrazide(MH). Significant increases were observed in nicotine content with increased fertilizer and lower topping height. A positive correlation was found between total sugar content and plant density. A negative correlation was found between nicotine and total sugar contents for 8-years. An increase of 1.0% nicotine in the cured leaf would result in a 4.8% reduction in total sugar. The most desirable contents were 2.7% for nicotine and 19.0% for total sugar(S/N=7).

• 한국대기환경학회지
• /
• 제14권2호
• /
• pp.107-116
• /
• 1998

Coal gasification fuel has generally a lower calorific values than natural gas and also contains ammonia which is a main source of fuel NOx. Such a fuel is in need of the advanced technologies for the NOx reduction with higher combustion efficiency. Therefore fuel staged combustion was investigated for the fuel NOx control using a bench scale gas combustoi for the fuel NOx control. Parametric screening studies were performed with the variation of air ratio, retention length and reburning fuel. The NOx reduction efficiency was increased with an increase of total air ratio having optimum reburning air ratio differently, The Increased retention length of the reburning zone was preferable for NOx reduction. Hydrocarbonic reburning fuels like propane and butane were more effective for the NOx reduction efficiency than hydrogen fuel. The NOx concentration at exit was linearly increased according to the fuel-N the fuel.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.33-40
• /
• 1991

The decrease in surface roughness of work roll and steel strip in cold rolling of low carbon steel strip has been investigated by working distance, materials, total separating force and total reduction ratio. The main results are as follows; For the same lubricating conditions. 1) The changing of surface roughness of steel strip were similar to work roll. The transcription ratio is in inverse proportion to the carbon content of steel strip. 2) The surface roughness of steel strip is hardly change according to changing of total separating force and total reduction ration. 3) The wear of work rolls surface is more rapid in that case of continuous casted steel strip than ingot casted steel strip. The aluminium content dull powder adhere on the rolls surface, and so. It makes the mirror surface of work roll accelerate.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권7호
• /
• pp.845-851
• /
• 2003

The purpose of this experimental study is to investigate the quantitative pollutants reduction by oxygen enrichment and induced air effect in venturi type after-burner. For this purpose, CO, $CO_2$, $O_2$. and HC concentrations were measured before and after the after-burner by changing the Oxygen flow rate and area ratio which is defined as the ratio of air inducing area divided by total area. As results of this study, when the area ratio were increased, the emission reduction effect was increased even less oxygen flow rate. In that case when oxygen was injected too little, the pollutants were increased.