• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.89-94
• /
• 2015

Objectives: The objective of this study was to determine characteristics of workers' exposures to airborne total and hexavalent chromium by job title in electroplating processes. Methods: Total Cr was determined through a modified method based on NIOSH Method 7024. Airborne hexavalent Cr, Cr(VI), was sampled and extracted according to NIOSH Method 7600 and analyzed at 520 nm using an ion chromatograph/visible detector. Results: The geometric mean(GM) of total Cr concentrations from all factories was $11.2{\mu}g/m^3$(GSD=4.9). The GM of Cr(VI) concentrations from all factories was $2.84{\mu}g/m$ (GSD=5.2), and the concentrations among factories were significantly different (p<0.05). The Cr(VI) levels were lower than total Cr levels. Total Cr exposure levels were highest among buffing workers ($21.6{\mu}g/m^3$), but Cr(VI) levels were highest among plating workers($4.15{\mu}g/m^3$). The concentrations of Cr(VI) and total Cr from plating tasks was highly correlated(r=0.91). Conclusions: In the electroplating industry, plating workers were mainly exposed to Cr(VI), but others were not. Oxidation-reduction states of Cr and job titles should be considered in the exposure or risk assessments of chrome electroplating factories.

• Preventive Nutrition and Food Science
• /
• 제9권4호
• /
• pp.342-345
• /
• 2004

This study evaluated the effects of different forms of chromium supplements on serum glucose, insulin and lipid concentrations in rats. Sprague-Dawley male rats were randomly assigned to one of three dietary groups and fed AIN-76 semi-purified basal diets supplemented with 300 ppb Cr from Cr methionine (CrMet) and Cr chloride $(CrCI_3)$ or without Cr (control). By the end of the $4^{th}$ week, all rats were decapitated, blood collected, and serum glucose, insulin and lipid concentrations were determined. The CrMet and $CrCl_3$ supplementation did not affect weight gain and feed efficiency ratio. However, feed intake was significantly higher in CrMet groups than control (p < 0.05). CrMet-supplemented rats had markedly increased insulin levels (p < 0.05) compared with controls. Serum lipids were not significantly different between the control and the CrMet groups. $CrCl_3$ supplementation decreased total cholesterol and triglyceride, but the decreases were only significant for the control group. $CrCl_3$ supplementation was associated with significant decreases in total cholesterol compared with CrMet supplementation. These results indicate that CrMet supplementation is effective for increasing serum insulin, and $CrCl_32$ may improve lipid concentrations, because we observed decreased serum total cholesterol and an improved total cholesterol/HDL-cholesterol ratio (THR).

• 한국식품영양과학회지
• /
• 제32권5호
• /
• pp.706-709
• /
• 2003

본 연구에서 식이중 CrMet 보충이 비만지수 및 지질 대사에 미치는 영향에 대하여 조사한 결과 실험군의 초기 체중은 비슷한 수준이었지만 CrMet 보충으로 최종 체중이 감소하는 경향을 보였고 이로 인해 CrMet 첨가시 비만지수 및 체지방 함량이 유의적으로 감소하였다(p<0.05). 혈청 total cholesterol은 CrMet 첨가시 69.22 $\pm$3.44 mg/㎗ 로 고지방군과 비교해 낮았으며(p<0.05), HDL cholesterol은 CrMet 보충으로 증가되었으며 HTR 지수도 높았다(p<0.05). 결과적으로 CrMet 보충은 체지방량과 혈청중 total cholesterol을 감소시키고 HDL cholesterol을 증가시킨다는 것을 알 수 있었다.

• Journal of Nutrition and Health
• /
• 제35권8호
• /
• pp.834-839
• /
• 2002

This study aimed to investigate the effects of chromium picolinatec (CrP) supplementation on the glucose and lipid metabolism of rats. Five-week-old male Sprague-Dawley rats were fed a high-fat diet fir 110 days and further treated with CrP or placebos for 6 weeks. The effect of CrP supplementation on body weight, blood glucose, insulin and lipid levels was examined. The results suggested that body weight gain was not significantly different between the control and the CrP supplemented group. Plasma glucose, triglyceride and cholesterol levels in the CrP treated group significantly decreased compared to those of the control group (p < 0.05). The total lipid, triglyceride and cholesterol concentrations in the livers of the CrP treated group significantly decreased compared to those of the control group (p < 0.05). These results indicate that supplementation of chromium picolinate ran reduce triglyceride and glucose concentrations in the blood and total lipid and total cholesterol levels in the liver.

• 한국산업보건학회지
• /
• 제8권2호
• /
• pp.209-223
• /
• 1998

The aim of this study was to evaluate welders' exposure to hexavalent chromium (Cr(VI)) and nickel (Ni) during welding operations in a Korean shipyard. The airborne Cr(VI) and Ni concentrations were measured during metal inert gas (MIG) welding on mild and stainless steel, and manual metal arc (MMA) welding on mild steel. The geometric mean (GM) of Cr(VI) concentrations inside the welding helmet during MIG welding on mild steel were $0.0018mg/m^3$ inside a ship section, and $0.0015-0.0026mg/m^3$ at the welding shops. All of the personal breathing zone air samples were below the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value ($TLV^{(R)}$) of $0.01mg/m^3$. Conversely, eighty-eight percent(21 of 24) of the personal breathing zone air samples exceeded the National Institute for Occupational Safety and Health (NIOSH) recommended exposure limit of $0.001mg/m^3$. Ni was not detected on 20 of 23 air samples collected during MIG welding on mild steel. The three Ni samples above the limit of detection ranged from 0.015 to $0.044mg/m^3$. The GM of Cr(VI) concentrations during MMA welding on mild steel were $0.0013mg/m^3$, but Ni was not detected in the air samples during this operation. It is assumed that the airborne Cr(VI) and Ni during mild steel welding were derived from the base metals which contained about 0.03% Cr and 0.03% Ni. The GM of airborne total Cr, Cr(VI) and Ni concentrations during MIG welding on stainless steel were 4.02, 0.13 and $0.86mg/m^3$, respectively, and the levels of Cr(VI) and Ni were above the ACGIH-$TLV^{(R)}$. Cr(VI) comprised about 35.5% of the total chromium(Cr) from MIG welding on mild steel, and about 8.4% of total Cr from MIG welding on stainless steel. The ratios of Cr(VI) to total Cr were significantly different among welding shops. It was concluded that welders were exposed to high levels of Cr(VI) and Ni during welding on stainless steel, and were exposed to low levels of Cr(VI) even during welding on mild steel.

• Tribology and Lubricants
• /
• 제38권4호
• /
• pp.162-169
• /
• 2022

Cobalt-chromium (CoCr)-based alloys have been used for wear applications because of their excellent mechanical properties and wear resistance. With growing concern over environmental problems, CoCr alloys are expected to be used for various tribological applications in degraded lubrication states. To expand the applicability of the materials, data should be accumulated across a broad spectrum of experimental parameters. In this work, the friction and wear characteristics of cobalt-chromium-tungsten (CoCrW) and cobalt-chromium-molybdenum (CoCrMo) alloys are investigated experimentally. The tests are conducted using a pin-on-reciprocating-plate tribotester in dry lubrication. CoCrW and CoCrMo are used as pin and plate materials to investigate the effect of the counter material. The results show that the friction coefficients between CoCrW and CoCrMo generally range from 0.4 to 0.5. The friction coefficient between the CoCrW pin and plate is found to be slightly small. However, the total wear between the CoCrW pin and plate is found to be the largest. In contrast, the total wear between the CoCrW pin and plate is relatively small. Furthermore, CoCrW may cause a faster wear progression of CoCrMo, especially for the case in which CoCrMo is used as the pin material. The results of this work provide a better understanding of the tribological properties of CoCrW and CoCrMo alloys. In addition, this work provides a practical guideline for the use of CoCrW and CoCrMo from the tribological design viewpoint.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.341-344
• /
• 1999

We reported compositional separation(CS) into Co-enriched and Cri-enriched components inside the grains of Co-Cr based thin films prepared by rf sputtering. CS strongly depends on the sputtering conditions of substrate temperature and target composition. Tuning the microstructure of the Co-Cr films is important in order to employ the CS for high-density magnetic recording. We investigated the origin of CS from thermodynamic viewpoint. We employ a spinodal decomposition-like model to describe the origin of the CS in Co-Cr films. We consider the total free energy of the Co-Cr films as the sum of several free energies of; 1) thermodynamic mixing entropy of a binary solid solution, 2) magnetic ordering interaction(MOI) energy below the Curie temperature, and 3) excess interaction energy(XS) caused by the sputtering process as a function of temperature and composition. Those energies distorted the total free energy like the spinodal decomposition and caused the compositionally separated fine microstructure inside the grains. If the second derivative of the total free energy with respect to Cr composition becomes negative at a given substrate temperature, we may observe a metastable compositional separation inside the Co-Cr alloy films. We expect to exploit the microstructure of CS for ultra-high density magnetic recording.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권11호
• /
• pp.1609-1613
• /
• 2013

An experiment was conducted to determine the apparent total tract digestibility (ATTD) and standardized total tract digestibility (STTD) of phosphorus (P) in copra expellers (CE), palm kernel expellers (PKE), and cassava root (CR). Eight barrows (initial BW of 40.0 kg, SD = 4.5) were individually housed in metabolism crates. A replicated $4{\times}3$ incomplete Latin square design was employed involving 4 dietary treatments, 3 periods, and 8 animals. Three experimental diets contained 40% CE, PKE or CR as the only source of P. A P-free diet mainly based on corn starch, sucrose, and gelatin was also prepared to estimate the basal endogenous loss of P. The marker-to-marker method was used for fecal collection. Values for the ATTD of P in the CE and PKE were greater than in the CR (46.0 and 39.7 vs -14.0%; p<0.05). However, the STTD of P did not differ greatly among the test ingredients (56.5, 49.0, and 43.2% in the CE, PKE, and CR, respectively). In conclusion, the ATTD of P values in CE and PKE were greater than that in CR, but the STTD of P did not differ greatly among CE, PKE, and CR.

• Korean Chemical Engineering Research
• /
• 제44권6호
• /
• pp.644-649
• /
• 2006

본 연구에서는 다양한 조건에서 기체상태의 오존처리된 활성탄소를 이용하여 수용액 상태에서의 Cr(VI)의 흡착특성에 대하여 고찰하였다. 오존처리된 활성탄소의 표면특성의 변화는 pH, 산도-염기도, FT-IR을 이용하였으며, $N_2$/77K 등온 흡착특성은 BET식, Boer의 t-plot, 그리고 Horvath-Kawazoe의 slit pore model을 이용하여 확인하였다. 또한, 총 Cr의 흡착량은 ICP-AES를 이용하여 확인하였다. 실험 결과, 오존처리는 활성탄소의 표면에 산소를 함유한 극성 관능기를 증가시켰으며, 이로 표면산도 또한 증가되었다. 한편, 오존처리의 영향으로 보이는 활성탄소의 비표면적과 미세기공 부피의 감소가 관찰되었지만, 활성탄소의 총 Cr 흡착량은 오존처리 시간이 증가할수록 비례적으로 증가하였다. 이는 활성탄소의 Cr 흡착특성이 비표면적보다 상대적으로 표면에 형성된 극성 관능기의 영향을 크게 받는 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1252-1256
• /
• 2009

A simple, selective and sensitive fluorescence quenching method was developed to the determination Cr(VI). The method is based on the oxidation of $I^-\;to\;{{I_3}^-}$ by Cr(VI) in sulfuric acid solution followed by immediate formation of ion association compound between I3 − and rhodamine 6G in Tween-80 micellar media at room temperature. The influence of several surfactants on rhodamine 6G fluorescence signal was studied; particular attention was paid in the aggregation behavior of rhodamine 6G–Tween-80 system. The experimental parameters (e.g., type of surfactant, reagent concentration) were studied and the optimal conditions were established. The linear calibration graph was obtained in the range 2.0 - 100.0 ng m$L^{-1}$ Cr(VI). The detection limit of the method was 0.37 ng m$L^{-1}$. The relative standard deviation (R.S.D.) is less than 5% (n = 5). The efficiency of the method for the determination of Cr(VI) in the presence of Cr(III) in the sample was investigated. The method was applied successfully to the determination of Cr(VI) and total Cr in water, and liver tissue samples.