• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.103-113
• /
• 2010

In this paper, a tradeoff between the total energy consumption-per-bit and the end-to-end rate under spatial reuse in wireless multi-hop network is developed and analyzed. The end-to-end rate of the network is the number of information bits transmitted (end-to-end) per channel use by any node in the network that is forwarding the data. In order to increase the bandwidth efficiency, spatial reuse is considered whereby simultaneous relay transmissions are allowed provided there is a minimum separation between such transmitters. The total energy consumption-per-bit includes the energy transmitted and the energy consumed by the receiver to process (demodulate and decoder) the received signal. The total energy consumption-per-bit is normalized by the distance between a source-destination pair in order to be consistent with a direct (single-hop) communication network. Lower bounds on this energy-bandwidth tradeoff are analyzed using convex optimization methods. For a given location of relays, it is shown that the total energy consumption-per-bit is minimized by optimally selecting the end-to-end rate. It is also demonstrated that spatial reuse can improve the bandwidth efficiency for a given total energy consumption-per-bit. However, at the rate that minimizes the total energy consumption-per-bit, spatial reuse does not provide lower energy consumption-per-bit compared to the case without spatial reuse. This is because spatial reuse requires more receiver energy consumption at a given end-to-end rate. Such degraded energy efficiency can be compensated by varying the minimum separation of hops between simultaneous transmitters. In the case of equi-spaced relays, analytical results for the energy-bandwidth tradeoff are provided and it is shown that the minimum energy consumption-per-bit decreases linearly with the end-to-end distance.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.3
• /
• pp.33-45
• /
• 2017

Crystalline silicon photovoltaic module certification began in 2007. "Renewable Energy Equipment Certification Scheme" was implemented until July 28, 2015. Then, the scheme was changed to "KS Certification Scheme" since July 29, 2015. A total of 2,331 models have been certified by 2016. The proportion of multi crystalline modules in certified products is higher than that of mono crystalline modules, and Korean modules account for 78% of the total certification modules. Chinese solar cells account for the highest percentage of 40% of the total modules and 62.4% of modules certified in 2016 use Chinese solar cells. With the development of technology, module power is continuously increasing, and efficiency is also rising. The average efficiency of mono crystalline module is 0.74% higher than the average of multi crystalline module. As a result of comparing domestic module with Chinese module, the highest efficiency of mono crystalline module and multi crystalline module and the average efficiency of mono crystalline module are higher than those of Chinese module, but the average efficiency of multi crystalline module is similar to that of Chinese module.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.9
• /
• pp.1113-1120
• /
• 1999

Leakage vortices fonned near the blade tip cause an increase of total pressure loss near the casing endwall region and as a result, the efficiency of rotor decreases. The reduction of rotor efficiency is related to the size of tip clearance. In this study, the three-dimensional flow fields in an axial flow rotor were calculated with varying tip clearance under various flow rates, and the numerical results were compared with experimental ones. The effects of tip clearance and the of attack on the leakage vortex and overall performance, and the los9 distributions were investigated through numerical calculations. In this study, tip leakage flow rate and total pressure loss due to the tip clearance were evaluated using numerical results and approximate equations were presented to evaluate the reduction of rotor efficiency due to the tip leakage flow.

• Korean Journal of Social Welfare
• /
• v.52
• /
• pp.117-141
• /
• 2003

This study is to identify the efficiency in Busan social welfare agencies between input factors and output factors. For this purpose, gathered are the 2001 services reports of those study agencies. This study used 4 difference model, model 1; comparing input factor(social worker number & labor cost) about output factor(the total number of program used person), model 2; comparing input factor(the total number of social welfare agencies staff & the total working expenses) about output factor(the total number of program used person), model 3; comparing input factor(the total number of volunteer, social welfare agencies staff & a period of operation) about output factor(the total number of program used person), model 4; comparing input factor(the total number of volunteer, social welfare agencies staff, a period of operation & the total working expenses) about output factor(the total number of program used person). Charnes's study(1978) provided an analytical tool for efficiency services output of non-profit organizations, and DEA(Data Envelopment Analysis) was a analytical framework for evaluating the impact of social service outcome. the finding are as follows : (1) In the results of comparing 4 models as same standard, we can find 35-55%(16-25) efficiency agencies among the 45 social welfare agencies. (2) For all DMU becoming the efficiency 1 to standard of output factor, model 1; 33 agencies are increasing the social worker number($\Delta$0.8 number), 10 agencies are raising the labor cost of social worker($\Delta$1,189,000 Won), model 2; 30 agencies are increasing the total number of social welfare agencies staff($\Delta$1.25 number), 14 agencies are raising the total working expenses($\Delta$1,447,000 Won), model 3; 8 agencies are increasing the total number of social welfare agencies staff($\Delta$2.26 number), 14 agencies are increasing the total number of volunteer($\Delta$52 number), and 10 agencies are increasing a period of operation($\Delta$13 month), model 4; 24 agencies are increasing the total number of social welfare agencies staff($\Delta$1.8 number), 12 agencies are raising the total working expenses($\Delta$5,017,000 Won), 12 agencies are increasing the total number of volunteer($\Delta$43.2 number), and 23 agencies are increasing a period of operation($\Delta$16 month).

• Korea Journal of Hospital Management
• /
• v.21 no.1
• /
• pp.43-50
• /
• 2016

The public medical centers are required to make efficient and profitable operation. The efficiency is usually measured by DEA(data envelopment analysis), and profitability is measured by medical income rate. But DEA is measured by relative, not absolute value. So, profitability rate is used alternatively for DEA. This study want to analyze the interchangeability between DEA ranking and medical income rate ranking among public medical centers. The return on total assets is same ranking with DEA on bed number, employee number and total asset, but 60-70% relationship with DEA on bed number and employee number, as input resources. The operating margin is similar ranking with DEA on bed number and employee number, but 50-60% relationship with DEA on bed number, employee number and total asset, as input resources.

• Applied Science and Convergence Technology
• /
• v.26 no.1
• /
• pp.1-5
• /
• 2017

The spurt vacuum pump is widely used to transfer sludge and slurry, and to control flow rate in a variety of processing fields, such as the oil, chemical, and fiber industries. The efficiency of the pump depends on the design parameters of the impeller, such as the number of blades, and the blade angle. In this study, the effect of the configuration of the impeller discharge angle of a spurt vacuum pump, which influences total head, shaft power, and efficiency, was numerically investigated using the commercial code, ANSYS CFX ver. 16.1. In addition, the performance of the pump was evaluated on the basis of the correlations between the total head, pump efficiency, and pressure distribution.

• Health Policy and Management
• /
• v.20 no.4
• /
• pp.45-57
• /
• 2010

Background : If different cost efficiency indexes were informed to the same clinic depending on the inclusion or exclusion of pharmacy cost, it may impair the reliability of provider-profiling system. This study aimed to investigate whether the omission of pharmacy cost affects cost-efficiency rankings in medical clinics. Methods : Data for ambulatory care cost at 23,112 medical clinics were collected from the claims database, which was constructed after review by the Health Insurance Review and Assessment Service (HIRA) of Korea in April 2007. We calculated two types of cost efficiency indexes by inclusion or exclusion of pharmacy cost for a medical clinic. The agreement between the decile rankings of the two indexes was also assessed using the weighted kappa statistic of Landis and Koch. Results : When the cost efficiency index for total cost including pharmacy cost was compared with the index for total cost excluding it, the agreement between the two indexes was only 55%. The agreements between the two indexes were relatively low within specialties which have larger pharmacy volume of total cost and lower correlation between total cost with or without pharmacy cost included than the average level of all the specialties. Conclusion : These results suggest that the omission of pharmacy cost may result in contradictory outcomes that may be confusing to a medical institution and may impair the reliability of provider-profiling systems. It is very important to standardize profiling criteria for the reliability of provider profiling system.

• Environmental and Resource Economics Review
• /
• v.14 no.3
• /
• pp.595-626
• /
• 2005

The purpose of this paper is to estimate technical efficiency, scale efficiency, and environmental efficiency by income level of Korean farms, and analyze the factors to decide three efficiencies. Depending on the non-parametric methods, we estimate technical using inputs and outputs of total farms without assuming of goods or behavior of optimization. The average technical efficiency of total firms under constant return to scale and strong disposability is 0.437. The technical inefficiency was caused by 47.7% in pure technical inefficiency, 11.3% in scale failure, and 3.2% in environmental inefficiency. The number of firms under increasing return to scale occupied almost 70% and 27% of total firms respectively. Higher are income class, middle debt & long debt per asset, and N effluents per cultural land, higher technical efficiency. The increases of BOD discharges per cultural land and machines per cultural land deteriorate environmental efficiency.

• KIEAE Journal
• /
• v.6 no.3
• /
• pp.43-48
• /
• 2006

This paper aims to suggest ways of institutionally improving standards that must be applied when installing Water Reclamation/Reuse (WRR) system based on efficiency analysis. Currently, the standard for WRR system establishment requires that the system should treat more than 10% of used water in the building of over $60,000m^2$ in total area of all floors, but our research has found that it would be more effective to change the standard to $150-m^3-per-day$ reclaimed water or the total area of all floors of $30,000m^2$ ($50,000m^2$ in the case of an office building). In other words, what this paper suggests is not a one-size-fits-all standard based on the total area of all floors, but a reasonable and flexible standard that takes into account efficiency and a unit water usage according to a building's purpose. Furthermore, this paper recommends a new WRR standard that can be applied to large-scale land development for housinglots, like the New Town. The recommendation is based on the economic analysis that the WRR system will ensure efficiency only if the amount of reclaimed water is over 4,000 tons per day, which corresponds to 4 millions square meters of housinglots. Regarding the size of the established facility, this paper suggests changing the standard, which is now set at over 10% of water usage, to what is relative to the total amount of use of reclaimed water in order to ensure efficiency and promote use of reclaimed water. In addition, this paper proposes that governmental support should be offered not only to facility owners, who are recipients at present, but also to facility builders. By doing so, those who donate a facility to the government, central or local, after building it, can be provided with substantial aid. Therefore, the application of the institutional improvement suggested in this paper is expected to create environment-friendly living conditions and boost the quality of life by encouraging people to secure water resources efficiently in buildings, and in a wider range, in cities.

• Journal of Korean Society on Water Environment
• /
• v.31 no.4
• /
• pp.418-427
• /
• 2015

This study was carried out to evaluate the performance of a lab-scale novel septic tank system for improving the conventional septic tank in the developing countries of water shortages. The lab-scale novel septic tank system consists of sepetic tank, aeration tank with HBC-ring, and sand filter. Optimum HRT was reguired about 1.5days to get a total COD removal efficiency of 90%, COD, BOD and SS removal efficiency was about 70%, 60%, and 85% in sepetic tank only. The structure of sepetic tank with two stages results in the high removal efficiency of organic matter. When sepetic tank, aeration tank, and sand filter were more than HRT 1.5days, 18hrs, and 12hrs, respectively, final effluent was less than 20 mg/L of BOD, 14 mg/L of SS, so that there is a high potential of its use for reusing water in flush toilet. There is no significant effect of HRT change on nutrient removal. Total nitrogen removal efficiency was about 40%, final effluent was 30~40 mg/L of TN, total phosphorus removal efficiency was about 11~25%, final effluent was 9~12 mg/L of TP. Because there is very small amounts of organic nitrogen and phosphorus in effluent, it was possible to reuse water for agricultural use.