• 동력기계공학회지
• /
• 제17권2호
• /
• pp.56-62
• /
• 2013

A technique is presented that uses a circular waveguide for the measurement of the bulk shear (S-wave) velocities of unconsolidated, saturated media, with particular application to near surface soils. The technique requires the measurement of the attenuation characteristics of the fundamental torsional mode that propagate along an embedded pipe, from which the acoustic properties of the surrounding medium are inferred. From the dispersion curve analysis, the feasibility of using fundamental torsional mode which is non-dispersive and have constant attenuation over all frequency range is discussed. The principles behind the technique are discussed and the results of an experimental laboratory validation are presented. The experimental data are best fitted for the different depths of wetted sand and the shear velocities are evaluated as a function of depths. Also the characteristics of the reflected signal from the defects are examined and the reflection coefficients are calculated for identifying the relation between defect sizes and the magnitude of the reflected signal.

• 한국소음진동공학회논문집
• /
• 제15권4호
• /
• pp.499-505
• /
• 2005

In this paper, a new type of pi+ezoelectric stepping motor is designed, manufactured and tested. This motor is composed of piezoelectric torsional actuator and a pair of one-way clutch bearings. The torsional actuator consists of 16-polygonal tube of piezoceramic that can produce an angular displacement associated with shear mode. One-way clutch bearing converts oscillation of torsional actuator into a continuous stepping rotation. The proposed stepping motor does not require any conversion mechanism for stepping motion like any other motors. In the design process, the shear resonance mode of piezoelectric actuator is analyzed by using a commercial finite element analysis program, and the performance of the fabricated torsional actuator is measured. $0.124^{\circ}$ of maximum angular displacement is measured in square wave excitation on the actuator only. The stepping motor is manufactured by assembling a pair of one-way clutch bearings and the torsional actuator. The maximum rotation speed of 72rpm and the blocking torque of 3.136 mNm are measured at 3540 Hz and 100V/mm. Once the proposed piezoelectric stepping motor is miniaturized, it can be used for many compact and precise moving applications.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.313-314
• /
• 1996

Assuming that the solar activity and the solar cycle phenomena may be manifestations of global torsional MHD oscillations, we compute the Alfven wave travel times along the field lines in the five models of magnetic field described in the following text. For all these models, we compute standard deviation and it's ratio to mean Alfvenic wave travel times. The last two models yield the smallest relative bandwidth for the frequencies of the MHD oscillations. However, the last model is the only admissible one which can sustain global Alfvenic oscillations with well defined frequency for the fundamental mode

• 비파괴검사학회지
• /
• 제24권2호
• /
• pp.136-141
• /
• 2004

배관에서의 균열 탐지를 위해서 비틀림 모드 유도초음파 검사법을 적용하였다. 배관에서 비틀림 모드의 생성 및 수신을 위하여 배열형 전자기음향 탐촉자 (EMAT, electromagnetic acoustic transducer)를 설계, 제작하였다. 직경 2.5 인치의 배관에 대해 주파수 2000kHz의 비틀림 모드 유도초음파를 적용하였으며 가진용으로 4개의 배열형 EMAT를 제작하였으며, 별도의 수신용 EMAT를 설계 제작하였다. 실제 중수로 피더관 mock-up에 대해 곡관부에 다양한 깊이의 인공 결함을 가공한 뒤 약 2 hi 거리에서 각각의 탐지능을 실험하였다. 결함 깊이가 관 두께 대비 5% 인 경우에도 결함 신호를 탐지할 수 있었으나 결함의 깊이와 신호 진폭과의 관계성은 나타나지 않았다.

• 한국소음진동공학회논문집
• /
• 제22권8호
• /
• pp.771-776
• /
• 2012

A technique is presented that uses a circular waveguide for the measurement of the bulk shear(S-wave) velocities of unconsolidated, saturated media, with particular application to near surface soils. The technique requires the measurement of the attenuation characteristics of the fumdamental T(0,1) mode that propagates along an embedded pipe, from which the acoustic properties of the surrounding medium are inferred. From the dispersion curve analysis, the feasibility of using T(0,1) mode which is non-dispersive and have constant attenuation over all frequency range is discussed. The principles behind the technique are discussed and the results of an experimental laboratory validation are presented. The experimental data are best fitted for the different depths of wetted sand and the shear velocities as a function of depths are formulated using power law curves.

• 한국소음진동공학회논문집
• /
• 제24권4호
• /
• pp.324-331
• /
• 2014

The sensor configuration of the magnetostrictive guided wave system can be described as a single continuous transducing element which makes it difficult to separate the individual modes from the reflected signal. In this work we develop the mode decomposition technique employing chirplet transform based on the maximum likelihood estimation, which is able to separate the individual modes from dispersive and multimodal waveform measured with the magnetostrictive sensor, and estimate the time-frequency centers and individual energies of the reflection, which would be used to locate and characterize defects. Simulation results on a carbon steel pipe are presented, which show the accurate mode separation and more discernible time-frequency representation could become enabled using the proposed technique.

• 대한기계학회논문집A
• /
• 제40권7호
• /
• pp.647-652
• /
• 2016

유도초음파를 활용한 비파괴검사기법은 장거리 배관 검사에 많이 활용된다. 장시간 사용에 따라 배관에는 표면 부식과 같은 형태의 결함이 주로 발생한다. 표면 부식형 결함의 경우 장거리 유도 초음파 검사 기법을 활용한 신호 해석에 어려움이 있다. 상반 정리는 복잡한 수학적 표현을 간단히 나타내주는 기법으로 잘 알려져 있다. 상반 정리는 평판, 반무한체의 산란 문제를 해결하는데 이미 적용된 바가 있지만 원통형 구조물에서는 적용된 사례가 없다. 이 논문에서는 배관 진단을 위해 상용 장비에서 많이 사용되는 비틀림파의 산란 신호를 상반 정리를 적용하여 해석하였다. 산란 신호는 상반 정리를 활용하여 산란 체의 형태와 위치에 따라 단순한 닫힘 해로 표현하였다. 타원형 결함과 사각 결함의 폭과 깊이 변화에 따라 주파수 별로 발생되는 산란 신호가 계산되었으며, 주파수 증가에 따른 주기적인 결과를 나타내는 것을 확인하였다. 산란 신호 해석을 위한 닫힘 해는 결함의 크기를 정량적으로 해석하는데 중요한 역할을 할 것으로 기대된다.

• Journal of Advanced Research in Ocean Engineering
• /
• 제4권4호
• /
• pp.174-184
• /
• 2018

We herein propose a new design procedure of a flexible container ship model where the vertical bending and torsional vibration modes are similar to its prototype. To achieve similarity in torsional vibration mode shapes, the height of the shear center of the model must be located below the bottom hull, similar to an actual container ship with large opening decks. Therefore, we designed a ship model by imparting appropriate stiffness to the hull, using urethane foam without a backbone. We built a container ship model according to this design strategy and validated its dynamic elastic properties using a decay test. We measured wave-induced structural vibrations and present the results of tank experiments in regular and freak waves.

• 한국소음진동공학회논문집
• /
• 제25권6호
• /
• pp.399-405
• /
• 2015

In this work we use the mode decomposition technique employing chirplet transform, which is able to separate the individual modes from dispersive and multimodal waveform measured with the magnetostrictive sensor. The mode decomposition technique is also used to estimate the time-frequency centers and individual energies of the reflection, which would be used to locate and characterize axial defects. The arrival times of the separated modes are calculated and the axial defect lengths can be evaluated by using the estimated arrival time. Results from an experiment on a carbon steel pipe are presented and it is shown that the accurate and quantitative defect characterization could become enabled using the proposed technique.

• Structural Engineering and Mechanics
• /
• 제77권5호
• /
• pp.571-586
• /
• 2021

The present paper studies the influence of the inhomogeneous initial stresses in the bi-layered hollow cylinder and it is assumed that these stresses are caused by the hydrostatic pressures acting on the interior and outer free surfaces of the cylinder. The study is made by utilizing the version of the three-dimensional linearized theory of elastic waves in bodies with initial stresses for which the initial stress-strain state in bodies is determined within the scope of the classical linear theory of elasticity. For the solution to the corresponding eigenvalue problem, the discrete-analytical method is employed. Numerical results are presented and analyzed for concrete selected pairs of materials. According to these results and their analyses, it is established that, unlike homogeneous initial stresses, the influence of the inhomogeneous initial stresses on the torsional wave dispersion has not only quantitative but also qualitative character. For instance, in particular, it is established that as a result of the initial stresses caused by the hydrostatic pressure acting in the interior free surface of the cylinder, the cut-off frequency appears for the fundamental dispersive mode and the values of this frequency increase with the intensity of this pressure.