• 한국정밀공학회지
• /
• 제6권4호
• /
• pp.52-60
• /
• 1989

In order to control the transient torsional vibration of rotational shaft system, the torsional stiffness of it has been taken into account in modelling the plant. In this paper the observer and controller has been designed in two ways. One is to consider the torsional stiffness and the other is to idealize the rotational shaft as rigid body. The third order observer considering torsional stiffness shows stable response on computer simulation. When the observer is designed on assumption of the rotational shaft being rigid body, the reduced order observer shows stable response whereas the full order observer shows unstable response.

• 한국의류산업학회지
• /
• 제2권5호
• /
• pp.437-442
• /
• 2000

In this paper, in order to examine the torsional behaviour of twisted yarn closely, the torsional rigidity would be derived in terms of physical and mechanical characteristics of its constituent fibers and yarn structural parameters by energy-method. And the propriety of the theory will be discussed by comparing with experimental results. The torsional rigidity of yarn in both experimental and theoretical results decreases with surface helix angle increases. But the experimental values are more higher than those of the theoretical ones.

• Wind and Structures
• /
• 제5권1호
• /
• pp.61-80
• /
• 2002

Wind tunnel aeroelastic model tests of the Commonwealth Advisory Aeronautical Research Council (CAARC) standard tall building were conducted using a three-degree-of-freedom base hinged aeroelastic(BHA) model. Experimental investigation into the effects of coupled translational-torsional motion, cross-wind/torsional frequency ratio and eccentricity between centre of mass and centre of stiffness on the wind-induced response characteristics and wind excitation mechanisms was carried out. The wind tunnel test results highlight the significant effects of coupled translational-torsional motion, and eccentricity between centre of mass and centre of stiffness, on both the normalised along-wind and cross-wind acceleration responses for reduced wind velocities ranging from 4 to 20. Coupled translational-torsional motion and eccentricity between centre of mass and centre of stiffness also have significant impacts on the amplitude-dependent effect caused by the vortex resonant process, and the transfer of vibrational energy between the along-wind and cross-wind directions. These resulted in either an increase or decrease of each response component, in particular at reduced wind velocities close to a critical value of 10. In addition, the contribution of vibrational energy from the torsional motion to the cross-wind response of the building model can be greatly amplified by the effect of resonance between the vortex shedding frequency and the torsional natural frequency of the building model.

• 한국소음진동공학회논문집
• /
• 제13권12호
• /
• pp.923-929
• /
• 2003

As for the marine propulsion shafting system using 4 stroke diesel engine, it is common to apply a reduction gear box between diesel engine and shafting to increase propulsion efficiency, which requires inevitably a certain elastic coupling to avoid chattering and hammering inside of gear box. In this study, the optimum method of rectifying propulsion shafting system in case of 750 ton fishing vessel is theoretically studied in a view of dynamic characteristics of torsion. After the replacement of diesel engine and gear box, the torsional vibration get worse and so some countermeasures are needed. The elastic coupling is modified from a present rubber coupling of block type having relatively high torsional stiffness to a rubber coupling haying two serially connected elements. Torsional vibration damper was installed at crankshaft free end additionally and moment of inertia of flywheel was adjusted. The dynamic characteristics of shafting system was improved by these modification. The theoretical analysis of torsional vibration are compared to measurement results using two laser torsion meters during the sea trial.

• 대한토목학회논문집
• /
• 제32권6A호
• /
• pp.347-354
• /
• 2012

본 연구에서는 Sine 파형 복부판을 갖는 I형 플레이트 거더의 비틂 상수와 �� 상수식을 제안한다. Sine 파형 복부판을 갖는 플레이트 거더는 일반적으로 기하학적 특성에 따라 높은 면외 방향 강성 및 전단강도, 비틂 강성을 갖는다. 특히, 플레이트 I형 거더의 횡-비틂 강도를 산정하는 데 있어서 부재 단면의 비틂 상수 및 �� 상수는 큰 영향을 미치는데, 종래의 수식으로는 Sine 파형 복부판의 이러한 단면상수를 합리적으로 산정하는 데 어려움이 있다. 따라서 본 연구에서는 Sine 파형 복부판의 기하학적 특성을 반영할 수 있는 새로운 제안식을 연구하였다. 쉘 요소를 사용한 I형 플레이트 거더의 순수 비틂 거동에 대한 유한요소해석결과를 통해 파형의 기하학적 특성에 따른 비틂 상수 변화를 분석하고 이를 회귀분석하여 수식을 제안하였다. 이후, 순수 비틂과 �� 비틂이 함께 존재하는 조건에서의 유한요소해석 결과를 통해 �� 상수 계산식을 제안하였다. 이 두 제안식은 단순 지지된 Sine 파형 복부판을 갖는 I형 플레이트 거더의 횡-비틂 좌굴해석 결과를 토대로 검증되었다. 본 연구에서 제안한 두 수식을 통해 Sine 파형 복부판을 갖는 I형 플레이트 거더의 중요한 두 단면 상수를 명확히 계산할 수 있고, 이를 통해 정확한 횡-비틂 좌굴 강도를 손쉽게 계산할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1280-1285
• /
• 2000

The paper deals with a theoretical study on the vibrational characteristics of piezoelectric torsional transducers. The differential equations of piezoelectric torsional motion have been derived in terms of the circumferential displacement and the electric potential. Applying mechanical and electrical boundary conditions has yielded the characteristic equations of natural vibration in several transducer types. Numerical results have clarified the effect of the piezoelectric phenomenon on the mechanical resonance and the effect of the elastic block of a Langevin-type transducer on the natural frequency.

• 소음진동
• /
• 제10권6호
• /
• pp.955-962
• /
• 2000

The paper deals with a theoretical study on the vibrational characteristics of piezoelectric torsional transducers. The differential equations of piezoelectric torsional motion have been derived in terms of the circumferential displacement and the electric potential. Applying mechanical and electrical boundary conditions has yielded the characteristic equations of natural vibration in several transducer types. Numerical results have clarified the effect of the piezoelectric phenomenon on the mechanical resonance and the effect of the elastic block of a Langevin-type transducer on the natural frequency.

• 소음진동
• /
• 제7권5호
• /
• pp.853-860
• /
• 1997

For this study, the multi-degree of freedom analysis model of torsional vibration was developed. This model is combined with mass moment of inertia and torsional spring in two wheel drive and four wheel drive vehicle. We compared and analyzed torsional vibration characteristics by natural frequencies and mode shapes which are obtained by free vibration analysis of this model. And we studied torsional vibration contribution of driveline elements by performing the forced vibration analysis of engine excitation torque. The validity of this model is demonstrated by the field test. The reduction effect of the torsional vibration along the driveline design factor is presented by the analytical results.

• 비파괴검사학회지
• /
• 제21권4호
• /
• pp.434-438
• /
• 2001

봉에서 전파하는 비틀림파를 발생시키는 압전 비틀림 파동 변환기를 제작하였다. 비틀림 파동을 발생시키는 원리는 원주방향으로 분극된 압전 원판에 인가된 두께 방향 전압에 의해 나타나는 원주방향 전단운동이다. 압전 비틀림 원판을 제작한 후, 공진 주파수를 낮추기 위하여 랑주방(Langevin)형 비틀림 변환기를 제작하였다. 제작된 변환기들의 공진 주파수를 측정한 결과, 해석에 의해 예상된 특성과 잘 일치하였다.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.221-228
• /
• 1999

A full-time four wheel drive vehicle is driven literally full time by the front and the rear wheels. Front and rear drive shafts are rotated rapidly in the extremely torsional state, which can cause various vibration and noise problems. The purpose of this study is to reduce the vibration and the noise of the full -time four wheel drive vehicle. In this paper, both the causes and the methods for reduction of torsional vibration are suggested. For this study, the characteristics of the torsional vibration are analyzed by free and forced torsional vibration simulation. And this paper described the influence upon the torsional vibration with emphasis shafting system. The validity of simulation models is checked by the field test. The forced vibration simulation with the variations of shaft design factors are performed by the checked models. According to the simulation , the resonance region shifts and the torque fluctuation varies in the system,. Finally, the methods and the effects for the torsional vibration reduction in driveline are proposed.