• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.387-395
• /
• 2006

Nowadays, various digital maps on a reduced scale were drawn in Korea including the topographic series of a nation. Though these digital maps are drawn and revised by using aerial photograph or satellite image, there are some problems that it is difficult to revise or renew the topography and natural feature immediately which changes frequently. As the countermeasures of these problems we use GPS accumbency method, which provides user with convenience and accumbency accuracy which is required to revise and renew digital maps. But acquiring correct position by using GPS only may cause not a few errors because of environmental effect of satellite signal errors that GPS obtains. Although accumulated errors which is the major problem of existing method was diminished owing to the position signal received from satellite which is about 20,183km above, the area that can not receives the signal is occur such as woods and high-rise buildings space. And because of the GDOP (Geometry Dilution of Precision) of GPS satellite and the periodically changing orbit of the satellite, the position calculating problems occur. For settlement of these problems and accurate position determination, DGPS (Differential GPS) is indispensably needed. So, in this study, by adapting Radio Beacon Receiver for marine position determination which is the most convenience method of DGPS methods, we elevated accuracy of modification and renewal of digital map and, having wide application in various measurements, proposed the rapid measurement method about widespread area. In this study, wewant to propose the work scheme of rapid modification and renewal of digital map by using Beacon GPS which is comparatively cheap of all the DGPS methods and which makes it possible to measure independently.

• Geophysics and Geophysical Exploration
• /
• v.7 no.2
• /
• pp.148-154
• /
• 2004

This article reviews the development of three-dimensional (3-D) magnetotelluric (MT) modeling. The 3-D modeling of electromagnetic fields is essential in understanding the physics of MT soundings, and in implementing an inversion method to reconstruct a 3-D resistivity image. Although various numerical schemes have been developed over the last two decades, practical methods have been quite limited. However, the recent rapid improvement in computer speed and memory, as well as the advance in iterative solution algorithms for a large system of equations, makes it possible to model the MT responses of complex 3-D structures, which have been very difficult to simulate before. The use of staggered grids in finite difference method has become popular, conserving a magnetic flux and an electric current and allowing for realistic discontinuous fields. The convergence of numerical solutions has been greatly accelerated by adopting Krylov subspace methods, proper preconditioning techniques, and static divergence corrections. The vector finite-element method using edge elements is also free from the discontinuity problem, and seems a natural choice for modeling complex structures including irregular topography because its flexibility allows one to capture full geometric complexity.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.47-53
• /
• 2006

The Integrated Ballistics Identification Systems (IBIS) is widely used for bullet and casing signature identification. The IBIS obtains a pair of ballistic signatures from two bullets (or casings) using optical microscopy, and estimates a correlation score which can represent the degree of signature match. However, this method largely depends on lighting and surface conditions because optical image contrast is primarily a function of test surface's slope, shadowing, multiple reflections, optical properties, and illumination direction. Moreover, it can be affected with surface height variation. To overcome these problems and improve the identification system, we used well known surface topographic techniques, such as confocal microscopy and white-light scanning interferometry. The measuring instruments were calibrated by a NIST step height standard and verified by a NIST sinusoidal profile roughness standard and a commercial roughness standard. We also suggest a new analysis method for the ballistic identification. In this method, the maximum cross-correlation function CCFmax is used to quantify the degree of signature match. If the compared signatures were exactly the same, CCFmax would be $100\%$.

• Economic and Environmental Geology
• /
• v.40 no.1 s.182
• /
• pp.87-101
• /
• 2007

A variety of informations obtained from satellite image, digital elevation relief map (DEM), borehole logging, televiewer, geophysical prospecting, etc were synthetically analyzed to investigate subsurface geological and structural characteristics and to evaluate geohazard pertinent to fault-damage in the Busan metropolitan city. It is revealed that the geology is composed of the Cretaceous andesitic$\sim$dacitic volcanics, gabbro, and granitoid and that at least three major faults including the Dongrae fault are developed in the study area. Based on characteristics of topography, fault-fractured zone, and isobath maps of the Quaternary sediments and weathered residuals of the basement, the Dongrae fault is decreased in its width and fracturing intensity of damaged zone from south toward north, and the fault is segmented around the area between the Seomyeon and Yangieong junctions. Meanwhile, we drew a geohazard sectional map using the five major parameters that significantly suggest damage intensity of basement by fault, i.e. distance from fault core, TCR, RQD, uniaxial rock strength, and seismic velocity of S wave. The map is evaluated as a suitable method to express the geological and structural characteristics and fault-damaged intensity of basement in the study area. It is, thus, concluded that the proposed method can contribute to complement and amplify the capability of the present evaluation system of rock mass.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.3-9
• /
• 2013

Various data like digital maps(1/1,000 or 1/5,000), field surveying, online materials and literatures are used for the preliminary investigation for urban development such as the feasibility evaluation, the profitability analysis, the zoning proposal, the zoning designation, and the land replotting planning. There are a couple of urban development methods like an expropriation, a replotting, a mixed-used method. The replotting method requires the consideration of land replotting types based on topography and building condition, which is not easy to gather data for the preliminary investigation maintaining the security of development planning. There are limitations of a preliminary investigation using aerial photos to detect topographic and building changes at specific period. GIS data combined with high-resolution imagery has advantages over the current dataset, which come from easy acquisition of various spatial resolution satellite images, wide swath coverage, the choice of imagery resolution satisfying a usage purpose, economic benefit comparing to aerial photos, and the calculation of distance and area on imagery from image modeling. For these reasons, the proposed method in this study enables to perform the more appropriate preliminary investigation using more accurate information.

• Journal of the Korean association of regional geographers
• /
• v.13 no.3
• /
• pp.321-340
• /
• 2007

In this thesis we have examined the concrete forms and periodic tendency changes of eup-settlements, local administrative town, locations within 91 districts in 71 counties of Gyeongsang province. First of all, we have analyzed the overall conditions of eup-settlement locations in Joseon Dynasty under the criterion of topography, feng-shui, and scenery image of the mountains at the back. Then we looked into alterations of location forms mainly of the eup-settlement in which the exact time of migration can be identified and cities which have the evident dates of construction. To sum up, the result is as follows. Firstly, the concrete form of eup-settlement locations in Joseon Dynasty are usually built up in traditional ways, however, quite a few unconventional ones also existed. Secondly, the town castles constructed at the end of Goryeo Dynasty period and before 1430's are hardly related to the traditional location format of Joseon Dynasty, yet the ones constructed after 1430's were mostly in the typical location format. Thirdly, the old eup-settlements established before 1425 are scarcely in the typical location form of Joseon dynasty, but the new eup-settlement established after 1425 were mostly in the typical location forms.

• Journal of the Korean association of regional geographers
• /
• v.12 no.2
• /
• pp.323-337
• /
• 2006

This thesis aims to study Change of the Land Use in Yanji city since the reformation and opening of China in the Connection with Urbanization Process. This study is based on Landsat image and maps and data related to topography, urban planning basic, the cadastral map were employed. Softwares such as Arcview3.3, ArcGis8.0 were used. The result of the research is as follows. It clearly appears that there have decreased in the ratio of agricultural areas since the increase in other urban usage of land. There has greatly increased in residential, commercial and industrial areas. Such as the capitalist and market economic city the highest point of city land price emerged in downtown of the old city center. In addition spatial pattern of land price is unusually quite different from the western city in its pattern of land price surface declining tendency between the highest land price and the lowest land price. The land price surface shows irregular patterns with increase of distance from downtown due to various urban developments. According to the land price distribution map, it is possible to guess spatial development of the city that the north-eastern part of Yanji was developed prior to south-western area. The center of the city, or downtown expanded to eastward, and the city expanded to south-westward out skirt. Along the main road, Xin-xing areas developed toward east and west ward.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.89-99
• /
• 2015

Recently, our construction industry is actively participating in numerous city planning projects in the third world countries. Considering the current depression of domestic real estate market, the emerging foreign demands could certainly provide substantial opportunities for the domestic industry to overcome the trough. For the field planners dealing with such foreign projects, though, the immediate problem is the lack of public statistics and geographic information to perform spatial analyses and/or prepare master plans. This study, in this context, tries to simulate a process to construct a digitized basemap of the case area, 'Bab Ezzouar,' in Algeria of Northern Africa. The area is a typical municipality that lacks the IT databases. To overcome the data shortage, the study uses the satellite map tiles so as to digitize the roads and building structures. It then estimates the block-wise populations based on the building image interpolation as well as the supplementary field survey data. The topographic TINs are also built by the SRTM (Shuttle Radar Topography Mission) digital elevation maps so that the three-dimensional configuration of the structures and terrains are rendered to check the urban scenery and skylines.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.23-31
• /
• 2009

The border of the shorelines in a nation is an important factor in determining the border of a national territory, but Korea's shorelines are rapidly changing due to the recent rise in sea level from global warming and growth-centered economic policy over the decades of years. This research was done centering on the areas having well-preserved shorelines as they naturally are and other areas having damaged shorelines in their vicinities due to artificial structures at the two beaches located at the neighboring areas and having mutually homogeneous ocean conditions with each other. First, this research derived the shorelines using the aerial photographies taken from 1947 until 2007 and revised the tidal levels sounding data obtained from a hydrographical survey automation system consisting of Echosounder[Echotrac 3100] and Differential Global Positioning System[Beacon]by using topographical data and ships on land obtained by applying post-processing Kinematic GPS measuring method. In addition, this research evaluated the changes and dimensional variations for the last 60 years by dividing these determined shorelines into 5 sections. As a result, the Haewundae Beach showed a total of 29% decrease rate in dimension as of the year 2007 in comparison with the year 1947 due to a rapid dimensional decline centering on its west areas, while the dimension of the Gwanganri Beach showed an increase in its dimension amounting to a total of 69% due to the decrease in flow velocity by artificial structures built on both ends of the beach-forming accumulation; thus, it was found that there existed a big difference in deposition & accumulation tendency depending on neighboring environment in spite of the homogeneous ocean conditions.

• Journal of Distribution Science
• /
• v.10 no.5
• /
• pp.29-36
• /
• 2012

This paper aims to establish a Fengshui-based marketing model that companies engaged in selling dwelling spaces can utilize to increase their sales. The study is based on an investigation of appraisal statements and analysis techniques used in Fengshui. The Fengshui marketing model can be used for corporate advertising, sales promotions, public relations events, and for framing an overall marketing strategy according to changing consumer demand. As a sales promotion strategy, it can be used to influence consumer psychology and behavior. Although this study is limited to the all-pervasive advertising and marketing of houses by construction companies under installment plans, the Fengshui marketing method can also be used for the sale of store locations, space for product display, and so on. Initially, I analyze living spaces according to traditional Fengshui theory, and subsequently apply the modern method to study topographical space structures and geomagnetism disturbances. I present a standard form for writing the Fengshui appraisal statement based on the objective analytical method of Fengshui. With its shortcomings remedied, the appraisal statement can lead to high-quality advertising and increased valuations because it is based on objective data analysis and systematic evaluation of houses. In brief, I have designed the Fengshui marketing model as a sales promotion technique for the housing industry. I believe this study will contribute to the application of Fengshui in the housing industry's sales promotion efforts through high-quality advertising. Future research should evaluate Fengshui marketing in the housing industry based on case studies. Research questions to be addressed could include how Fengshui marketing has affected installment sales of houses and how Fengshui architectural practices affect general well-being. These studies would help propagate Fengshui marketing by validating its effectiveness. In addition, case studies should be undertaken to consider the practical applications of Fengshui marketing, how it can contribute to maximizing a company's image and profits, and how it can promote customer satisfaction.