• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.3
• /
• pp.192-195
• /
• 2019

Single-crystal diamond obtained by chemical vapor deposition (CVD) exhibits great potential for use in next-generation power devices. Low defect density is required for the use of such power devices in high-power operations; however, plastic deformation and lattice strain increase the dislocation density during diamond growth by CVD. Therefore, characterization of the dislocations in CVD diamond is essential to ensure the growth of high-quality diamond. In this work, we analyze the characteristics of the dislocations in CVD diamond through synchrotron white beam X-ray topography. In estimate, many threading edge dislocations and five mixed dislocations were identified over the whole surface.

• Journal of applied mathematics & informatics
• /
• v.29 no.5_6
• /
• pp.1583-1602
• /
• 2011

A special system of partial differential equations (PDEs) occur in a natural way while studying a class of irrotational inviscid fluid flow problems involving infinite channels. Certain aspects of solutions of such PDEs are analyzed in the context of flow problems involving multiple layers of fluids of different constant densities in a channel associated with arbitrary bottom topography. The whole analysis is divided into two parts-part A and part B. In part A the linearized theory is employed along with the standard Fourier analysis to understand such flow problems and physical quantities of interest are derived analytically. In part B, the same set of problems handled in part A are examined in the light of a weakly non-linear theory involving perturbation in terms of a small parameter and it is shown that the original problems can be cast into KdV type of nonlinear PDEs involving the bottom topography occurring in one of the coefficients of these equations. Special cases of bottom topography are worked out in detail and expressions for quantities of physical importance are derived.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.6
• /
• pp.649-661
• /
• 2008

The impact of the detailed surface data on regional meteorological fields in complex coastal area is studied using RAMS. Resolutions of topography and land use data are very important to numerical modeling, because high resolution data can reflect correct terrain height and detail characteristics of the surface. Especially, in complex coastal region such as Gwangyang area, southern area in Korean Peninsula, high resolution topography and land use data are indispensable for accurate modeling results. This study investigated the effect of resolutions of terrain data using SRTM with 3 second resolution topography and KLU with 1 second resolution land use data. Case HR was the experiment using high resolution data, whereas Case LR used low resolution data. In Case HR, computed surface temperature was higher than Case LR along the coastline and wind speed was $1{\sim}2m/s$ weaker than Case LR. Time series of temperature and wind speed indicated great agreement with the observation data. Moreover, Case HR indicated outstanding results on statistical analysis such as regression, root mean square error, index of agreement.

• Ocean and Polar Research
• /
• v.29 no.4
• /
• pp.303-310
• /
• 2007

2-D wavelet analysis is applied to bathymetric data from the KR1 area of Korea Deepsea Mining Area. The wavelet analysis is one of the quantitative methods to analyze the topography. The wavelet allows us to create filters to select for topography in a continuous variety of shapes, sizes, and orientation. The 2-D Linear B-spline filter, 100 BS and 100 NF, is convolved with bathymetric data to identify the location of abyssal hills and abyssal troughs in bathymetry. In addition, the 2-D derivative of Cubic B-spline filter, 60 BS and 60 NF, is applied to bathymetric data to find the slope of abyssal hill in bathymetry. These filters were rotated $5^{\circ}$ counterclockwise from NS to match the dominant orientation of seafloor lineament. Both filters result in good match with abyssal hills, troughs, and slopes. This method can apply to fault, fold, and other lineament structures description with variable size. The result of application shows that wavelet analysis of bathymetric data could be used with fundamental data of geophysical analysis.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.5 s.72
• /
• pp.23-29
• /
• 2006

A quasi depth-varying mathematical model for wind-generated circulation in coastal areas, expressed in terms of the depth-averaged horizontal velocity components and free surface elevation was validated and used to understand the diurnal circulation process. The wind velocity is considered as a dominant factor for driving the current. In this paper, three-dimensional numerical experiments that included the land topography were used to investigate the mesoscale air flaw over the coastal regions. The surface temperature of the inland area was determined through a surface heat budget consideration with the inclusion of a layer of vegetation.A series of numerical experiments were then carried out to investigate the diurnal response of the air flaw and wind-generated circulation to various types of surface inhomogeneities.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.213-217
• /
• 2009

The transcription characteristics of the mold surface in the molding of aspherical glass lenses for camera phone modules have been investigated experimentally. The surface topographies of both the form and the roughness were compared between the mold and the molded lens. For the form topography, the molded lens showed a transcription ratio of 93.4% against the mold, which is obtained by comparing the form error (PV) values of the mold and the molded lens. The transcription characteristics of the roughness topography were ascertained by bearing ratio analysis.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.87-90
• /
• 2008

In design PV(photovoltaic) system, there are many important factors to consider for best site selection. It is essential to understand to know the amount of sunlight available and how to minimize the shadings. This study presents basic concepts for understanding sun's position and insolation. also gives easy tools for topography analysis. Finally, this study shows some theoretical calculations of power generation losses and disadvantages in economic feasibility.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.289-297
• /
• 2000

The determination of surface topography is believed to be extremely important in the areas of contact mechanics, adhesion and friction. In order to describe topography of various frictional surface, the harding test was carried out under different experimental conditions in try friction. And fractal descriptors was applied to frictional surface of laser modified steel with image processing system These descriptors to analyze surface structure are fractal dimension. Surface fractal dimension can be determined by sum of intensity difference of surface pixel. Topography of frictional surface can be effectively obtained by fractal dimensions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1237-1246
• /
• 2015

A novel technique was proposed to calculate fluxes accurately by separation of flow area into a part of step face which is dominated by flow resistance of it and an upper part which is relatively less affected by the step face in analyzing shallow-water flows over discontinuous topography. This technique gives fairly good agreement with exact solutions, 3D simulations, and experimental results. It has been possible to directly analyze shallow-water flows over discontinuous topography by the technique developed in this study. It is expected to apply the developed technique to accurate evaluation of overflows over weirs or retaining walls (riverside roads) and areas flooded by the inundation in the city covered in discontinuous topography.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.331-337
• /
• 2012

In this study, the front side member is optimized using a topography optimization technique. Optimization of a simple beam is conducted before optimization of the front side member. The objective function is set to minimize the first buckling factor in the longitudinal direction. The design variable corresponds to the perturbation of nodes normal to the shell's mid-plane space. The crash analysis is conducted on a simple beam, which is optimized by Response Surface Method and the topography optimization technique. In order to verify the topography optimization technique, the results of the RSM and topography optimization model are compared. Consequently, we confirm the satisfactory performance of the topography optimization technique, and apply this topography optimization to the front side member. Thus, the front side member is optimized and its crashworthiness is increased.