• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.3 s.30
• /
• pp.13-21
• /
• 2004

Landuse information is used to plan land use, urban and environmental management as base data. And, demand for landuse information is rising due to ecological consideration. But existing method to extract landuse information from aerial photographs or field survey is consume a lot of time and cost. In urban area where the pattern of landuse is densely aggregated, a landuse information needs to be classified in detail for urban planning and management. Therefore this study aims to examine the method to extract landuse information in detail from 1:1,000 digital topographic data. For the purpose, the method was applied to a part of metropolitan Seoul. The results of study shows that extraction of landuse information except forest area is possible. Forest area is needed to describe smaller spatial unit. For the future, the method of describing forest area is improved it will be effectively applicable for the city maintenance.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.169-177
• /
• 1997

The purpose of this paper is to study the ideal Auto-surveying system and to establish the standard of work procedure involved with completing a precise three-dimensional topographic survey with RTK GPS equipment, a pen based personal computer, and real time CADD software. The fieldwork was done at a golf course which could be regarded as a heavy civil project site such as the reclamation and the site preparation work in December of 1997. The proposed Auto-surveying system and the work procedure in this paper is based on the data processing and the resultant topographic map of the golf course.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.324-329
• /
• 2006

Non-negative matrix factorization(NMF) 기법은 음이 아닌 값으로 구성된 데이터를 두 종류의 양의 행렬의 곱의 형식으로 분할하는 데이터 분석기법으로서, 텍스트마이닝, 바이오인포매틱스, 멀티미디어 데이터 분석 등에 활용되었다. 본 연구에서는 기본 NMF 기법에 기반하여 텍스트 문서로부터 토픽을 추출하고 동시에 이를 가시적으로 도시하기 위한 Topographic NMF (TNMF) 기법을 제안한다. TNMF에 의한 토픽 가시화는 데이터를 전체적인 관점에서 보다 직관적으로 파악하는데 도움이 될 수 있다. TNMF는 생성모델 관점에서 볼 때, 2개의 은닉층을 갖는 계층적 모델로 표현할 수 있으며, 상위 은닉층에서 하위 은닉층으로의 연결은 토픽공간상에서 토픽간의 전이확률 또는 이웃함수를 정의한다. TNMF에서의 학습은 전이확률값의 연속적 스케줄링 과정 속에서 반복적 파리미터 갱신 과정을 통해 학습이 이루어지는데, 파라미터 갱신은 기본 NMF 기반 학습 과정으로부터 유사한 형태로 유도될 수 있음을 보인다. 추가적으로 Probabilistic LSA에 기초한 토픽 가시화 기법 및 희소(sparse)한 해(解) 도출을 목적으로 한 non-smooth NMF 기법과의 연관성을 분석, 제시한다. NIPS 학회 논문 데이터에 대한 실험을 통해 제안된 방법론이 문서 내에 내재된 토픽들을 효과적으로 가시화 할 수 있음을 제시한다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.4
• /
• pp.136-145
• /
• 2009

Site characteristic is an important input parameter in the geologic hazard assessments including, but not limited to, earthquakes, liquefaction and landslides. Although it is a routine to use data collected by boreholes or seismic prospecting for site classifications, we used indirect methods using the geologic and the topographic maps. A site classification map in the Gyeongsang Province has been produced by GIS tools based on geologic age, rock types, and elevations from the geologic map and the topographic map of Korea. Site B (rock site) is dominant in the study area, although softer soils are observed along rivers and in reclaimed lands. We have found that 73% of the site classification results in the study are in concordance with those obtained from borehole data. Observed discrepancies are attributed to errors in the geologic and the topographic maps. For some sites, the origin of the differences is not clear, which requires a further field study or a drilling. Site classification from this study provides essential information for reliable hazard assessments of earthquakes, floods, landslides and liquefaction. Results obtained in the study also play a crucial role in land use planning for developing areas.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.103-112
• /
• 2019

Extraction of region of interest for satellite image classification is one of the important techniques for efficient management of the national land space. However, recent studies on satellite image classification often depend on the information of the selected image in selecting the region of interest. This study propose an effective method of selecting the area of interest using the continuous digital topographic map constructed from high resolution images. The spatial information used in this research is based on the digital topographic map from 2013 to 2017 provided by the National Geographical Information Institute and the 2015 Sejong City land cover map provided by the Ministry of Environment. To verify the accuracy of the extracted area of interest, KOMPSAT-3A satellite images were used which taken on October 28, 2018 and July 7, 2018. The baseline samples for 2015 were extracted using the unchanged area of the continuous digital topographic map for 2013-2015 and the land cover map for 2015, and also extracted the baseline samples in 2018 using the unchanged area of the continuous digital topographic map for 2015-2017 and the land cover map for 2015. The redundant areas that occurred when merging continuous digital topographic maps and land cover maps were removed to prevent confusion of data. Finally, the checkpoints are generated within the region of interest, and the accuracy of the region of interest extracted from the K3A satellite images and the error matrix in 2015 and 2018 is shown, and the accuracy is approximately 93% and 72%, respectively. The accuracy of the region of interest can be used as a region of interest, and the misclassified region can be used as a reference for change detection.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.221-227
• /
• 2004

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.3
• /
• pp.23-34
• /
• 1999

This study proposed the possibility of GIS to analyze stream physiographic characteristics of river basin which is important control factor in complex water management. Based on five 1:25,000 topographic maps which cover Yengchon Dam area locates upper area of Kumho River, this study analyzed the characteristics using Arc/Info(UNIX) GIS. Comparing its results and those from the existing method using digital planimeter, it could conclude as follows; First, as the results of the analysis of hypsometric curve of Yeungchon Dam area, it has the topographic characteristics of youth and maturity. And the landform of Yengchon Dam area has developed with regularity when Horton's three laws on the morphology of stream is applied. Second, the possibility of applying GIS to data management and utilization is sufficient even if it requires long time to construct topographic attribute data. Finally, a further research is needed on watershed direction with landform for the purpose of analyzing water source management and topographic property effectively.

• Spatial Information Research
• /
• v.6 no.2
• /
• pp.233-245
• /
• 1998

This study focused on developing a comprehensive strategy to revise 1:1,000 digital topographic maps for Seoul metropolitan area in terms of both organizational and technical aspects. First of all, we analyze the elements of' the revision strategy in the organization domain and produce four alternatives. Of these alternatives, we suggest a best alternative which appears to be practically sound. Secondly, we review four possible map updating methodologies, paper map digitization, a partial topographic map revision method, a method utilizing scanned aerial photographs, and a method using digital orthophotos. Through a detailed technical analysis and cost analysis of each method, we suggest a reasonable map updating method. Finally, we provide a guideline for distributing 1:1,000 digital topographic maps based on the digital map distribution policy National Geography Institute.

• Spatial Information Research
• /
• v.19 no.1
• /
• pp.73-82
• /
• 2011

Recently, demand for the use of cadastral map is increasing in both public and private area. To use cadastral map in web or mobile environment, construction of the multi-representation database(MRDB) that is the compressed into multiple scale from the original map data is recommended. In this study, the map generalization methodology for the cadastral map by applying overlay with topographic map and polygon generalization technique is suggested. This process is composed of three steps, re-constructing the network data of topographic map, polygon merging of parcel lines according to network degree, and applying line simplification techniques. Proposed methodologies are applied to the cadastral map in Suwon area. The result map was generalized into 1:5,000, 1:20,000, 1:100,000 scale, and data compression ratio was shown in 15% 8% 1% level respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.2
• /
• pp.35-39
• /
• 2021

Photogrammetry using drone can produce high-resolution ortho image and acquire high-accuracy 3D information, which is useful. Therefore, this study attempted to determine the possibility of using drone-photogrammetry in park construction by producing a topographic map using drone-photogrammetry and analyzing the problems and accuracy generated during production. For this purpose, we created ortho image and DSM (digital surface model) using drone images and created topographic status map by vectorizing them. Accuracy was compared based on topographic status map by GPS (global positioning system) and TS (total station). The resulting of analyzing mean of the residuals at check points showed that 0.044 m in plane and 0.066 m in elevation, satisfying the tolerance range of 1/1,000 numerical maps, and result of compared lake size showed a difference of about 4.4%. On the other hand, it was difficult to obtain accurate height values for terrain in which existed vegetation when producing the topographic map, and in the case of underground buried objects, it is not possible to confirm it in the image, so direct spatial information acquisition was necessary. Therefore, it is judged that the topographic status map using drone photogrammetry can be efficiently constructed if direct spatial data acquisition is achieved for some terrain.