• Geomechanics and Engineering
• /
• 제31권5호
• /
• pp.489-503
• /
• 2022

A 1257-m-long irregular deep foundation pit located in the central of Nanjing, China was constructed using the combined full-width and half-width top-down method. Based on the long-term field monitoring data, this study analyzed the evolution characteristics of the vertical movement of the columns, internal force of the struts, and axial force of the structural beam and slab. The relevance of the three mentioned above and their relationship with the excavation process, structural system, and geological conditions were also investigated. The results showed that the column uplift was within the range of 0.08% to 0.22% of the excavation depth, and the embedded depth ratio of the diaphragm wall and the bottom heave affected significantly on the column uplift. The differential settlement between the column and diaphragm wall remained unchanged after the base slab was cast. The final settlement of the diaphragm wall was twice the column uplift. The internal force of the struts did not varied monotonically but was related to numerous factors such as the excavation depth, number of struts, and environmental conditions. Additionally, the dynamic force and deformation of the columns, beams, and slabs were analyzed to investigate the inherent relationship and variation patterns of the responses of different parts of the structure.

• 한국물환경학회지
• /
• 제27권6호
• /
• pp.776-783
• /
• 2011

In a natural water body, a useful ecotechnology to reduce standing crops of phytoplankton is to strengthen the top-down force of zooplankton. However, the predation of fish for zooplankton can make the force weak. This study was conducted to find out the effect of fish on the grazing pressure of zooplankton in the mesocosms established in a eutrophic stream (Kyongan Stream) from October to November in 2010. In the corral with fish, chlorophyll a concentration increased, and a small size cladoceran Bosmina longirostris was dominant. In the corral without fish, chlorophyll a concentration decreased along with the domination of a large cladoceran Daphnia galeata and a large copepod Eudiaptomus japonicus. The size-selective predation of fish appeared to miniaturize the zooplankton community, to narrow their food-size spectrum, and to weaken the top-down force.

• 국제물리치료학회지
• /
• 제1권2호
• /
• pp.162-168
• /
• 2010

Low back pain is a common phenomenon among the golfers. In an attempt to understand low back pain, the kinematic changes and golf swing motion analysis has been performed to focus on lumbar spine in pro. golfers. According to the swing pattern, significant variations of the lumbar joint forces and loads has related with muscles activities so the motion analysis of lumbar spine were discussed. The purpose of this study was to analyze motion of lumbar spine and it was to compare joint force during golf swing in pro. golfers. The swing motion of the subjects was tracked using a 3D motion analysis system by Motion Analysis Ltd. and SIMM software. The angle changes of lumbar spine rapidly in vx direction during the top back swing and the finish and in vy direction during the follow through and in vz direction during the down swing and the impact(Subject A). The angle changes of lumbar spine rapidly in vx direction during the top back swing and in vy direction during the down swing, the impact and the follow through and in vz direction during the down swing(Subject B). In conclusion, subject A and B both show sudden angle changes between 1st-3rd lumbar spine and 4th-5th lumbar spine during the stage from address to top back swing which caused by over upper body twisting.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.808-813
• /
• 2009

Top-down method is widely used for urban area construction for its advantages in reducing environmental problems such as dust and noise, and saving construction cost depending on given conditions of a construction site. Because the excavation and construction of super- and sub-structures of the building have to be proceeded simultaneously, a column has to be embedded prior to excavation. This column is called a pillar column or pre-founded column. Usually a wide flange section is used for these columns. To place the columns, usually the diameter of casing holes needs to be larger than the section of the wide flange itself in order to accommodate a couple of tremie pipes for pouring concrete. In this paper, a newly developed method of using circular pipe as an alternative to the existing wide flange section is discussed. The crucial part of the new method is to develop a connection between the circular column and concrete flat slabs. For shear force transfer from concrete slab to the concrete filled tube (CFT) column, shear jackets with studs and shear bands are proposed. The studs are welded on the jackets at shop and placed around the circular column on site. The shear bands are welded on the outer side of the CFT at shop and inserted into ground with the CFT. Test results and application of the method to a construction site are also provided in this paper.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.29-31
• /
• 2007

Building construction in downtown is ever increasing with a strong demand. Top-Down Method is one of suitable construction method for its advantage in minimizing disturbance to neighborhood. Along with these reasons construction site has developed lots of new methods and materials for Time-Cost Trade-off and improving constructability. Opened Slab is one of these method which resist the horizontal force by slab and it has many merit about construction time and unity. We analyze the compression tests on opened slab for the application.

• 한국운동역학회지
• /
• 제26권2호
• /
• pp.191-195
• /
• 2016

Purpose: The purpose of this study was to analyze the immediate effects of ankle restriction with an elastic band on ground reaction force during a golf swing. Method: There were five subjects who were teaching pros with an average golf score of 75. A force platform (9281B, Switzerland) was used. The independent variable was the presence of an elastic band. The dependent variables were three-dimensional ground reaction forces to analyze the transfer of momentum with the timing, control and coordination of the three forces. A paired t-test within subject repeated measure design was used via an SPSS 20.0. Results: Wearing an elastic band around one's ankles significantly makes shorter time differences between the moment of cross anterior / posterior forces and vertical force and median value of anterior / posterior forces during the backswing, between medial and lateral maximum and anterior / posterior force from the top of the back swing to the mid down swing, and creates an anterior / posterior maximum force. Conclusion: Wearing an elastic band around one's ankles affects control and coordination between three dimensional forces, and anterior force power according to each phase of the golf swing.

• 한국해양공학회지
• /
• 제12권3호통권29호
• /
• pp.86-95
• /
• 1998

CAD/CAM program developers have made substantial progress in enabling engineers to design, analyze, visualize, visualize, and simulate the performance of structures and systems. Many researchers, however, agree that there is still a way to go before the existing commercial computer software can be used in ship structural analysis to their full potential as solvers which can identify opportunities to reduce man-hours and cut costs. CAD systems used for these works in ship yards are general-purposed and not custom-tailored for ship structures, which force end-users to do tiresome and routine works. The new preprocessor "MeshGen" announced in this study can load several ship types and user-friendly generate their FE meshes employing the object-oriented approach based on the parametric and top-down design. Also "MeshGen" reduces dramatically the time required to prepare CAD models under window-based environments on desktop personal computers and makes it much easier and faster for end-users to change topology and material properties.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권3호
• /
• pp.155-163
• /
• 2021

The study aims to investigate the effect on Philippine occupational choice of House Bill No.7787, also known as the National Wage Law, which was filled by the Philippine Congress that mandates the implementation of an across the board minimum daily wage of Php750.00 to all workers in the Philippines. This study had used the Computable General Equilibrium-Top-Down Behavioral Microsimulation approach to determine the effect of National Wage Law on occupational choice. The results of the study revealed that the implementation of said National Wage Law would affect the distribution of labor force across occupational classification such as wage workers, entrepreneurial farming activities workers, and entrepreneurial non-farming activities workers. This has resulted from a higher utility that will be derived from the wage working sector once the National Wage Law will be implemented. Further, among regions in the Philippines, the Calabarzon, National Capital Region, and Central Luzon had recorded the highest number of workers who prefer the wage income sector. The findings of the study also suggest that the Philippine agricultural sector will be greatly affected by the National Wage Law due to the preference of workers to shift from the entrepreneurial farming sector to belong to the wage sector.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.957-960
• /
• 2008

최근 급격히 진행되고 있는 도심지 구조물의 대형화, 고층화에 따른 고층건물의 해체뿐 아니라 극한 환경의 해체현장에서 기존의 해체공법은 인력+장비에 의한 해체작업을 수행하여 언제나 작업자에 대한 치명적인 위험에 노출되어 있었다. 따라서 본 연구는 낙후된 해체산업을 첨단화시키고, 안전하고 친환경적인 해체장비 및 공법을 개발하고자 한다. 이를 위해 첫 번째, 선진외국의 해체장비인 B사(社)와 국내 무인해체장비인 M사(社)의 장비 성능을 비교분석하기 위한 장비시연회를 개최하였다. 이러한 성능의 비교분석을 토대로 해체산업에서 요구되는 기능을 도출하고, 그에 적합한 햅틱장치(haptic device) 기술, 힘반향 메카니즘(force feed-back mechanism), 환경인식용 센서퓨전(sensor fusion) 기술등 첨단기능이 융합된 무인해체 장비의 요소기술을 제안하였다. 이를 토대로 먼저, 새로운 햅틱장치 (haptic device)를 고안하였다. 두 번째로 기존의 고층건물의 기계식 해체공법을 개선한 탑다운 (Top-Down) 해체장치 및 공법을 제시하였다.

• 정보화연구
• /
• 제10권4호
• /
• pp.517-536
• /
• 2013

전쟁 패러다임이 플랫폼 중심 전에서 네트워크 중심 전으로 변화함에 따라 네트워크 중심 전을 보다 효과적으로 수행하기 위한 소요제기 방식 또한 기존 플랫폼, 무기체계 중심의 상향식 방식에서 능력 개념을 적용한 하향식 방식으로 변화하고 있다. 하향식 소요제기 방식은 능력기반기획 및 능력기반평가 등을 통해 수행되는 개념이다. 그러나 이러한 개념을 방법론에 적절하게 적용하는 것은 도전이다. 따라서 기 개발된 방법론의 시사점으로부터 능력기반평가를 기반으로 능력기반기획 시 적의 능력을 기준으로 아군이 확보해야 할 적절한 능력을 도출할 수 있는 새로운 방법론을 제안한다. 본 논문에서 제안하는 방법론은 군사작전 분야 뿐 아니라 치안확보, 자연재해 분야의 능력기반평가기반 능력기반기획 시 적용 할 수 있다.