• Journal of Korea Multimedia Society
• /
• v.14 no.12
• /
• pp.1613-1620
• /
• 2011

Roof structure of the traditional buildings in the Northeast Asia region including Korea contains the most complicated and crucial components of the building and therefore the issues such as cost down, productivity and the attempt to combine the traditional building methodology with contemporary building technology turn out to be vital to the survival of the old yet disconnected traditional building industry. One of the distinctive modern building technologies is handling life-cycle building information by constructing virtual buildings using BIM, building information modeling tools. In this paper we follow a procedure to implement some of the design modules to be applied in BIM tools which are platforms for constructing virtual building models. We focus on Gong-po components namely the bracket-sets which are the essential part that connects the middle parts to the top parts (the roof structure) which are considered to be the most elaborate parts of the traditional buildings. The target building to work with in this paper is the Sung-Rye-Moon which has special cultural and social meanings nowadays and we tested our understanding and the design modules such as the bracket-sets by constructing a virtual building model of Sung-Rye-Moon.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.9
• /
• pp.47-54
• /
• 2000

We designed asynchronous event logic library with 0.25um CMOS technology and interface chip for heterogeneous system with high-speed asynchronous FIFO operating at 1.6GHz. Optimized asynchronous standard cell layouts and Verilog models are designed for top-down design methodology. A Method for mitigating a design bottleneck when it comes to tolerate clock skew is described. This communication scheme using clock control circuits, which is used for the free of synchronization failures, is analyzed and implemented. With clock control circuit and FIFO, high-speed communication between synchronous modules operating at different clock frequencies or with asynchronous modules is performed. The core size of implemented high-speed 32bit-interface chip for heterogeneous system is about $1.1mm{\times}1.1mm$.

• Journal of Korea Foundry Society
• /
• v.21 no.5
• /
• pp.290-295
• /
• 2001

We fabricated test samples containing various shape elements and surface roughness checking points for the jewelry cast master patterns by employing the 3D computer aided design (CAD), selective laser sintering (SLS) rapid prototype (RP) with the DuraForm powders. We varied the alignment angle from $0^{\circ}$ to $10^{\circ}$ at a given layer thickness of 0.08 and 0.1mm, respectively, in RP operation. Dimensions of the shape elements as well as values of surface roughness are characterized by an optical microscope and a contact-scanning profilometer. Surface roughness values of the top and vertical face increased as the alignment angle increased, while the other roughness values and shape elements variation were not depending on the alignment angle. The resolution of the shape realization was enhanced as the layer thickness became smaller. The minimum diameter of the hole, common in jewelry design, was 1.2 mm, and the shrinkage became 12% at the 1.6 mm-diameter hole, Our results implied that we face down the proposed design elements with $0^{\circ}$ alignment angle, and consider the shrinkage effect of each shape element in DuraForm RP jewelry modeling.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.70-79
• /
• 2006

many plumbing system are needed in the ceiling of the building as it becomes advanced more and more. This leads to make effective space between ceiling level and slab less. Also, piping system is not suitably arranged and operated if it is bent around the columns which they are a lot. But this system can be more effective if it passes through the columns directly. Most people think that those columns should not be damaged with such as holes. But actually this is existed in a hotel building in switzerland. This study is to fing out how much capacity the columns become damaged and low using model size of $20cm{\times}30cm$ rectangular section, and 160cm long, in the structural test. it's compressive strength is focused on $240kg/cm^{2}$ design strength, commonly used in korea. Compressive test for them was done at Hanyang University using UTM one thousand tone(1000t) capacity. Variable numbers for the study are one hole of dia 3cm with distance 20cm or 40cm, two holes of dia 3cm with 20cm and 40cm distance, one hole of dia 5cm with distance 20cm and 40cm, two holes of dia 5cm with 20cm and 40cm distance, me eccentric hole with 20cm and 40cm distance, Normal(without hole). two test specimens of each variable are made for the test. ED5H20 capacity was 16.7% decreased, compared to normal one. While ED5H40 distant 40cm from the end of column top showed 19.5% capacity decrease, compared to normal one. Strain of ED5H20 diameter 5cm, in distance of 20cm form the top of the column was less 5% than the one of diameter 3cm. Finally, conclusions are that in case of hole diameter 3cm, located at 20cm from the end of the column top, capacity was decreased down to 3, percent only compared to the same diameter hole with 20cm distant from the end of it.

• ETRI Journal
• /
• v.21 no.3
• /
• pp.29-40
• /
• 1999

The Mission Analysis and Planning System (MAPS) has been developed for a low earth orbiting remote sensing satellite, Korea Multipurpose Satellite-I (KOMPSAT-I), to monitor and control the orbit and the attitude as well as to generate mission timelines and command plans. The MAPS has been designed using a top-down approach and modular programming method to ensure flexibility in modification and expansion of the system. Furthermore, a graphical user interface has been adopted to ensure friendliness. Design, Implementation, and testing of the KOMPSAT is discussed in this paper.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.372-375
• /
• 2000

퍼지 시스템은 비선형 시스템을 해석하고 제어기 설계 등에 많이 이용되고 있으나 대부분의 그 구현은 PC나 웍스테이션의 프로그램에 의존하고 있다. 고속의 동작을 요구하는 시스템이나 소형 시스템에는 전용 프로세서의 사용이 필요하다. 본 논문에서는 여러 퍼지 시스템 중에서 적은 규칙수로도 효과적인 성능을 나타내고 결론부가 선형식으로 표현되어 ASIC을 이용한 하드웨어화가 용이한 형태를 가진 TSK퍼지 추론 프로세서를 FPGA로 구현한다. ASIC의 설계는 Top-down 방식을 이용하여 전체구성은 Schematic을 이용하고 기능블록은 VHDL로 기술한다. TSK퍼지 추론의 연산은 전제부와 결론부를 병렬연산함으로써 고속처리를 구현하고 이에 필요한 제어부를 설계하였다. 또한 하드웨어 구현을 위해 실수연산을 이산화된 연산으로 바꾸고 이에 따른 나누기 연산자를 구현하였다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.05a
• /
• pp.20-25
• /
• 2001

In recent years, the concern about a user center design in increasing, and it's needed to task a user's visual cognitive characteristics for information presentation. Then this study aims to grasp user's cognitive characteristics about the information presentation by analyzing the fixation points. In the experiment, actually subject operated a copy machine. Recorded the fixation point movement of the operation panel by the eye mark recorder. Analysis examined the screen interface of the operation panel from the field of a fixation point trace. The top down type fixation oder by experience or the context became clear as a result. Furthermore, the difference of the fixation order by skill level was also examined. In this study, it was assumed that to grasp the visual cognitive characteristics becomes the key of efficient information.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.205-208
• /
• 1998

본 논문에서는 VLSI 기술에 바탕을 둔 top-down 접근 방식에 의하여 MPEG-2 오디오 부호화 알고리듬을 구현하였다. MPEG-2 오디오 부호화기의 알고리듬은 많은 연산량을 갖고 이질적인 특성을 갖고 이질적인 특성을 갖는 알고리듬들이 복합적으로 존재한다. 그러므로, 부호화기를 효과적으로 구현하기 위해서는 알고리듬 수준에서 구조적 수준에 이르기까지 많은 고찰이 이루어져야 한다. 본 논문에서는 우선 전체 부호화 알고리듬을 분석하여 이들을 다시 작업이라고 정의된 작은 부-알고리듬으로 나누었다. 다음으로, 분할된 작업들은 시간과 공간을 초대한 활용할 수 있도록 적절한 작업 순서를 부여하고, 좀 더 큰 모듈들로 모으는 클러스터링을 수행하였다. 마지막으로 이러한 분석 결과를 바탕으로, 실시간으로 동작하는 5.1 채널 MPEG-2 오디오 부호화기를 설계하였다. 설계된 시스템은 두 개의 하드웨어 블록과 한 개의 ASIP형 DSP 프로세서를 갖는 이질적인 다중 프로세서의 형태를 갖는다. 설계된 오디오 부호화기는 0.6$\mu\textrm{m}$ 표준 셀 기술을 이용하여 단일 칩으로 제작되었으며, PC에 탑재 가능한 시험 기판을 제작하여 동작을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2402-2406
• /
• 2005

A collision query determines the intersection between given objects, and is used in computer-aided design and manufacturing, animation and simulation systems, and physically-based modeling. Bounding volume hierarchies are one of the simplest and most widely used data structures for performing collision detection on complex models. In this paper, we present hierarchy of oriented rounded bounding volume for fast proximity queries. Designing hierarchies of new bounding volumes, we use to combine multiple bounding volume types in a single hierarchy. The new bounding volume corresponds to geometric shape composed of a core primitive shape grown outward by some offset such as the Minkowski sum of rectangular box and a sphere shape. In the experiment of parallel close proximity, a number of benchmarks to measure the performance of the new bounding box and compare to that of other bounding volumes.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.9-14
• /
• 1998

In this paper, we described the basic elements(flowabiligy, fillingability, elapsed time, pumpability, no-vibrating effects, and etc.) required for the application and quality control of the super flowing concrete(SFC) in Top Down site. Also, manufactured sand and fly ash were used for investigating characteristics of SFC through various experiments(mix design, optimum mix condition) before placing the concrete in site. As a result of this project, the developed SFC shown high flowability and self-fillingability in the joint good enough for the requirement. Futhermore, inner uniformity of the no-vibrated concrete was verified by testing reformed space. Therefore, quality control and compressive strength(360kg/$\textrm{cm}^2$) can be secured by using SFC even without vibrating.