• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.1
• /
• pp.115-125
• /
• 1995

Forty-four cases of developmental salivary gland defects in 43 patients were analysed radiologically. The obtained results were as follows ; 1. It occurred more frequently in males(86 ％) than in females(14 ％). The age distribution of patients ranged from 20 to 74 years with the average being 52.7 years. 2. All but one were located between the angle of the mandible and the molar tooth. Only one patient showed bilateral occurrence. 3. The shape of the defect was ovoid(15 cases), round(10 cases), or half-ovoid(5 cases) 4. Their size ranged from 5 x 6 mm to 16 x 30 mm with the average around 9 x 14 mm. 5. Twenty-eight cases appeared to be surrounded partially(1/3 - 2/3) by a hyperostotic border. The thickness of the hyperostotic border varied ; thick(14 cases), moderate(l1 cases), thin(9 cases), or mixed(6 cases) 6. Thirteen cases were in contact with the superior border of the mandibular inferior cortex, 11 cases partially eroded the cortical plate, and 7 cases showed discontinuity of the mandibular inferior cortex. 7. Twenty-three cases were located below the mandibular canal, 13 cases overlapped the mandibular canal, and 2 cases showed slight deviation of the mandibular canal.

• Journal of Periodontal and Implant Science
• /
• v.38 no.2
• /
• pp.199-206
• /
• 2008

Purpose: Variation in the morphology of gingival papilla may be determined by the shape and position of anatomic crown as well as contact area and embrasure form of individual teeth. However, periodontal biotype classification is regarded to be subjective because of the lack of definite criteria. In this study, we defined the objective parameters which constitute the periodontal biotype and measured their relationship. Materials and Methods: 109 of dental casts were prepared using three dimensional scanner and specialized reconstruction software, then acquiredvirtual models were sent to the 20 professional dentists to define the specific periodontal biotypes. Several parameters around periodontal structures were measured from the virtual models; facial surface area of the anterior tooth (AT), anterior papillary area (AP), proportion of the dento-papillary complex, clinical papillary length (PL), and clinical papillary angle (PA). Statistical analysis was performed to confirm the relationship among parameters. Results: Coincidence rate of periodontal biotype within observers was $63.77{\pm}16.05%$. Coincidence rate between observers was $76.15{\pm}16.43%$. Among the parameters measured, PL showed the most positive correlations and PA presented the most negative correlations. The parameter of the AP and PL of six maxillary anterior teeth showed significant correlation coefficient. Conclusion: Anterior papillary area and clinical papillary length would be objective parameters for determining the consistent periodontal biotypes.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.12 no.2
• /
• pp.66-71
• /
• 2016

Intellectual disability is accompanied by a high incidence of congenitally absent teeth and supernumerary teeth, and is observed more frequently than are disorders of location and order during delayed eruption, when accompanied by other symptoms. Furthermore, it is associated with a higher occurrence of dental anomalies such as conical teeth, microdontia, and amelogenesis imperfecta. As it is difficult to obtain adequate cooperation from patients with intellectual disabilities, physical restraint and conscious sedation using medication and general anesthesia can be considered. Reshaping of conical teeth with resin composite may be helpful to rehabilitate patients with oligodontia and a conical tooth shape. Diagnostic wax-up and a silicone matrix formed the basis for the successful reconstruction of the anterior teeth. This case describes the treatment of a patient with intellectual disability who had oligodontia and conical-shaped incisors. Under general anesthesia, the patient was treated using direct composite resin restoration.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.4
• /
• pp.197-202
• /
• 2007

Fit of the restoration and its cementation procedure is crucial to both its short and long term prognosis. Marginal fit is affected by many variables during the fabrication process. These variables, being intrinsic properties of the materials or the clinical technique used, can cause changes in the size and shape of the definitive restoration. Even if all variables are controlled carefully, the seating of a restoration can still be affected due to insufficient space for the luting agent. The use of die spacer can reduce the elevation of a cast restoration of a prepared tooth, decreased seating time, improve the outflow of excess cement, and lower the seating forces. The purpose of this study was to evaluate the marginal fidelity according to die spacer application times and measurement site. Casting alloys were prepared and fabricated using non-precious metal at $950^{\circ}C$. Specimens are divided into four groups: I(die spacer painted casting for wax pattern), II(die spacer non painted casting for wax pattern). The specimens were cut and polished for marginal gap observation. The marginal gap was observed using scanning electron microscopy (SEM).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.6
• /
• pp.98-106
• /
• 2022

Among the parts assembled in the gas receiver of a marine engine, the titanium alloy stainless steel (STS 316Ti) wire mesh serving as a filter was broken, and the related part, the turbine fan of the turbocharger, was damaged. In this study, a sample of the grid wire mesh was collected and the cause of breakage was analyzed, and a method of minimizing the dent mark caused by the mold during wire forming, which is one of the most direct causes, was studied. In addition, the optimum mold shape was realized through FEM simulation, and the wire wave molding machine capable of controlling the speed was improved by supplementing the problems of the existing wire wave molding machine, thereby improving durability with minimal dent marks.

• Journal of Biomedical Engineering Research
• /
• v.42 no.5
• /
• pp.201-210
• /
• 2021

In Korean medicine, tongue diagnosis is one of the important diagnostic methods for diagnosing abnormalities in the body. Representative features that are used in the tongue diagnosis include color, shape, texture, cracks, and tooth marks. When diagnosing a patient through these features, the diagnosis criteria may be different for each oriental medical doctor, and even the same person may have different diagnosis results depending on time and work environment. In order to overcome this problem, recent studies to automate and standardize tongue diagnosis using machine learning are continuing and the basic process of such a machine learning-based tongue diagnosis system is tongue segmentation. In this paper, image data is augmented based on the main tongue features, and backbones of various famous deep learning architecture models are used for automatic tongue segmentation. The experimental results show that the proposed augmentation technique improves the accuracy of tongue segmentation, and that automatic tongue segmentation can be performed with a high accuracy of 99.12%.

• The korean journal of orthodontics
• /
• v.52 no.6
• /
• pp.432-438
• /
• 2022

Objective: To compare crown-root angulations of the permanent maxillary anterior teeth in skeletal Class I, Class II, and Class III Korean malocclusion patients using cone-bean computed tomography (CBCT) images. Methods: Sixty CBCT images were collected from orthodontic patients archive based on skeletal Class I (0˚< A point-nasion-B point angle [ANB] < 4˚), Class II (ANB ≥ 4˚), and Class III (ANB ≤ 0˚) to have 20 samples in each group. Mesiodistal crown-root angulation (MDCRA) and labiolingual crown-root angulation (LLCRA) were evaluated after orientation of images. Crown-root angulations were compared among Class I, Class II, and Class III groups and among the maxillary anterior teeth in each group. Results: LLCRAs of the maxillary central incisor and the lateral incisor were significantly lower in Class III group than those in Class I group. However, those of the canine showed no significant differences among groups. MDCRAs of the maxillary anterior teeth did not significantly differ among groups either. Conclusions: Our results suggest that skeletal Class III malocclusion might affect LLCRA of the maxillary incisors, especially the central incisor.

• Tribology and Lubricants
• /
• v.39 no.5
• /
• pp.173-182
• /
• 2023

The composite planetary gear reducer, a power transmission component of armored vehicles, operates at a high torque and is used in severe environments such as mountain, gravel or unpaved roads. Therefore, they must be designed and manufactured to have high durability. To design such a planetary gear reducer, there are numerous specifications to validate, such as selecting the module and the number of teeth of each gear satisfied the requirements, and calculating gear specifications and durability strength. Because planetary gears constitute a combination of several gears, there are many restrictions and interferences in selecting the number of teeth and addendum modification coefficients, and designing the tooth shape. Developing an auto design program is necessary to design various planetary gears more conveniently and quickly. In this study, a planetary gear reducer design software, widely used in various machines and armored vehicles, was developed. This design software can automatically select the number of teeth and modules of the gears, calculate specifications and quickly evaluate its fatigue durability strength and scoring failure according to the planetary gear reducer design theory.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.421-431
• /
• 2002

C-shaped canal configuration is very difficult to treat because that clues about preoperative canal anatomy cannot be ascertained from clinical crown morphology and limited information can be derived from radiographic examination. This study was done to get more informations about the root and canal configuration of C-shape root by 3-dimensionally reconstructing for the purpose of enhancing success rate of endodontic treatment. 30 mandibular molars with C-shaped root were selected. Six photo images from occlusal, apical, mesial, distal, buccal, lingual directions and radiographic view were taken as preoperative ones to compare them with 3-D image. After crown reduction to the level of 1-2mm over pulpal floor was performed, teeth were stored in 5.25% sodium hypochlorite solution for the removal of pulp tissue and debris. They were cleaned under running water, allowed to bench dry and embedded in a self-curing resin. This resin block was serially ground with a microtome (Accutom-50, Struers, Denmark) and the image of each level was recorded by digital camera (FinePix S1-pro, Fuji Co., Japan). The thickness of each section was 0.25mm. Photographs of serial sections through all root canal were digitized using Adobe Photoshop 5.0 and then minimum thickness of open and closed sites were measured (open site is the surface containing occluso-apical groove closed site is oppsite). After dizitization using 3-D Doctor (Able software Corp, USA). 3D reconstruction of the outer surface of tooth and the inner surface of pulp space was made. Canal classsification of C-shaped roots was performed from this 3-D reconstructed image. The results were as follows : 1. Most C-shape rooted teeth showed lingual groove (28/30). 2 According to Vertuccis' calssification, type I, II, III, IV, VII were observed. but also new canal types suck as 2-3-2, 1-2-3-2. 2-3-2-1, 2-3-2-3 were shown. 3 There was little difference in minimum thickness on coronal and apical portions, but open site were thinner than closed site on mid portion. Conclusively, 3D reconstruction method could make the exact configurations of C-shape root possible to be visualized and analyzed from multi-directions. Data from minimum thickness recommend cleaning and shaping be more carefully done on dangerous mid portion.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.128-139
• /
• 2020

The purpose of this study was to examine the prevalence of developmental anomalies of permanent lateral incisor and eruption disturbances and analyze the association between two components. Panoramic radiographs of 3984 patients (aged 5 to 13 years) who visited the Department of Pediatric Dentistry of Seoul National University Dental Hospital between November 2016 and October 2017 were screened. The prevalence of developmental anomalies of permanent lateral incisors was 10.2%. The most common developmental anomalies were congenitally missing teeth(66.1%), followed by peg lateralis(33.5%). The prevalence of eruption disturbances was 16.5%. Among the patient with developmental anomalies of permanent lateral incisors, associated eruption disturbances were appeared on 31.1% of patients. Peg lateralis(p < 0.001), underdeveloped lateral incisors(p < 0.001) and dens invaginatus(p = 0.004) were associated significantly with eruption disturbance of permanent teeth. Eruption disturbance in patients with peg lateralis and dens invaginatus was most prevalent in maxillary canine. For patients with underdeveloped lateral incisor, eruption disturbance of maxillary central incisor was most frequent. It is important for patients with developmental anomalies of lateral incisors to detect associated eruption disturbance early through regular checkup. Diagnosis and treatment plan in view of such relationships is important in order to treat appropriately at the optimal time.