• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.546.1-546
• /
• 2003

Laser doppler flowmeter (LDF) has been applied to the measurement of pulpal blood flow (PBF) in human teeth. As far as we searched, the detection area of the pulp in the blood flow measurement has not been clarified, yet. Therefore, the purpose of this study was to obtain information of the detection area in PBF measurement using LDF. The experiments were performed on the artificial blood circulation in extracted human upper central incisors. The apical portions of examined teeth (n=6) were severed and root canals were enlarged from the apical end to the 2mm incisal to the level of enamel-cement junction. An individual resin cap of each tooth was prepared and a hole was drilled 2mm incisal to enamel-cement junction of the labial side of the cap. The measurement probe of LDF (MBF3D, Moor Instrument, UK) was plugged into the hole of the cap. Heparinized human peripheral blood, which was in advance collected and diluted 3 times with physiological saline, was pumped through the apical foramen of the teeth via a silicone tube and a disposable needle (o.d. 0.7mm) and blood flow signals were monitored. The flux signal significantly increased with the enlargement of the root canal to incisal direction (p<0.01, Friedman analysis). The result indicates that the performance of LDF in PBF with human teeth is limited.

• International Journal of Oral Biology
• /
• v.43 no.4
• /
• pp.177-183
• /
• 2018

The objective of this study was to examine the expression pattern of Kelch-like ECH-associated protein 1 (Keap1) in the maxillary $2^{nd}$ molar germs of rats. We used the maxillary $2^{nd}$ molar germs in rats' pup at postnatal day 3 (bell stage), 6 (crown formation stage) and 9 (root formation stage). The investigation on mRNA and protein levels were done using reverse transcription - polymerase chain reaction and western blot. Localization of Keap 1 in the maxillary $2^{nd}$ molar germs were revealed through immunofluorescence staining. Keap1 from the maxillary 2nd molar germs were mostly manifested on postnatal day 3 and dramatically decreased on postnatal day 6 and 9 at mRNA and protein levels, while amelogenin and ameloblastin increased during the development of maxillary 2nd molar germs. During immunofluorescence analysis, the strong immunoreactivity against Keap1 was detected in the apical side of ameloblasts at the presecretory and secretory stages. However, Keap1 expression was hardly observed in the ameloblasts at the maturation stage. These results shows that Keap1 is strongly expressed in the presecretory and secretory ameloblasts of amelogenesis, and suggest that Keap1 may be a crucial molecule for the regulatory mechanisms tasked with the formation of enamel layer.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.202-210
• /
• 2014

Purpose: The aim of this study was to evaluate the stress concentration and distribution whether restoring the cavity or not while restoring with metal ceramic crown on tooth with abfraction lesion using finite element analysis. Materials and methods: Maxillary first premolar was selected and made a total of 10 finite element model. Model 1 was natural tooth; Model 2 was tooth with metal ceramic crown restoration which margin was positioned above 2 mm from CEJ; Model 3 was tooth with metal ceramic crown restoration which margin was positioned on CEJ; Model 4 was natural tooth which has abfraction lesion; Model 5 and 6 had abfraction lesion and the other condition was same as model 2 and 3, respectively; Model 7 was natural tooth which had abfraction lesion restored with composite resin; Model 8 and 9 was tooth with metal ceramic crown after restoring on abfraction lesion with composite resin; Model 10 was restored tooth on abfraction lesion with composite resin and metal ceramic crown restoration which margin is positioned on lower border of abfraction lesion. Load A and Load B was also designed. Von Mises value was evaluated on each point. Results: Under load A or load B, on tooth with abfraction lesion, stress was concentrated on the apex of lesion. Under load A or load B, on tooth that abfraction lesion was restored with composite resin, the stress value was reduced on the apex. Conclusion: In case of abfraction lesion was restored with composite resin, the stress was concentrated on the apical border of restored cavity regardless of marginal position. It was favorable to place crown margin on the enamel for restoring with metal ceramic crown.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.4
• /
• pp.279-288
• /
• 2007

In the present study, we focused on stem cells in the dental papilla of the tooth germ. The tooth germ, sometimes called the tooth bud, is the primordial structure from which a tooth is formed. The tooth germ consists of the enamel organ, the dental papilla, and the dental follicle. The dental papilla lies below a cellular aggregation of the enamel organ. Mesenchymal cells within the dental papilla are responsible for formation of dentin and pulp of a tooth. Tooth germ disappears as a tooth is formed, but that of a third molar stays in the jawbone of a human until the age of 10 to 16, because third molars grow slowly. Impacted third molar tooth germs from young adults are sometimes extracted for orthodontic treatment. In the present study, we evaluated the osteogenic activity and mineralization of cultured human dental papilla-derived cells. Dental papillas were harvested from mandible during surgical extraction of lower impacted third molar from 3 patients aged 13-15 years. After passage 3, the dental papilla-derived cells were trypsinized and subsequently suspended in the osteogenic induction DMEM medium supplemented with 10% fetal bovine serum, 50 g/ml L-ascorbic acid 2-phosphate, 10 nM dexamethasone and 10 mM -glycerophosphate at a density of $1\;{\times}10^6\;cells/dish$ in a 100-mm culture dish. The dental papilla-derived cells were then cultured for 6 weeks and the medium was changes every 3 days during the incubation period. Dental papilla-derived cells showed positive alkaline phosphatase (ALP) staining during 42 days of culture period. The formation of ALP stain showed its maximal manifestation at day 7 of culture period, then decreased in intensity during the culture period. ALP mRNA level was largely elevated at 1 weeks and gradually decreased with culture time. Osteocalcin mRNA expression appeared at day 14 in culture, after that its expression continuously increased in a time-dependent manner up to day 28. The expression remained constant thereafter. Runx2 expression appeared at day 7 with no detection thereafter. Von Kossa-positive mineralization nodules were first present at day 14 in culture followed by an increased number of positive nodules during the entire duration of the culture period. Osteocalcin secretion was detectable in the culture medium from 1 week. The secretion of osteocalcin from dental papilla-derived cells into the medium greatly increased after 3 weeks although it showed a shallow increase by then. In conclusion, our study showed that cultured human dental papilla-derived cells differentiated into active osteoblastic cells that were involved in synthesis of bone matrix and the subsequent mineralization of the matrix.

• Journal of dental hygiene science
• /
• v.11 no.5
• /
• pp.445-453
• /
• 2011

Objectives : The purpose of this study was to determine of fluoride-releasing of orthodontic resin cements containing fluoride and compare decalcification of tooth attached fluoride and non-fluoride resin cements. Methods : Total eighty premolar tooth were used in this study. Forty tooth were used for fluoride releasing measurement and forty tooth were used for decalcification measurement. Each forty tooth were randomly divided into four groups, and brackets were attached on tooth surface with Blugloo, Light Bond, Orthofolw(experimental groups) and Transbond cement(control group). After brackets were attached on tooth surface, forty tooth were immersed in artificial salival and then the quantity of fluoride releasing was measured ever day for 8days and then three-days intervals for 3 weeks. Forty tooth were immersed in decalcification solution for 48hours and then degree of decalcification was measured as lesion area, ${\Delta}F$, and ${\Delta}Q$ using QLF. The data were analysed by one-way ANOVA and Pearson's correlation coefficient using SPSS 12.0 program. Results : Fluoride release of experimental groups was higher than control group(p<0.05). Cumulative fluoride release of experimental groups was also higher than control group(p<0.05). There were the highest release during first day. ${\Delta}F$, and ${\Delta}Q$ was high TB > BG > OF > LB (p<0.05). Change of ${\Delta}F$, and ${\Delta}Q$ was also high TB > BG > OF > LB (p<0.05). As for correlation between fluoride release and lesion area, ${\Delta}F$, and ${\Delta}Q$ showed negative correlation but there was no significant difference. Conclusions : This study shows that orthodontic reins cements containing fluoride release fluoride and prevent initial enamel decalcification caused by orthodontic treatment.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.3
• /
• pp.201-206
• /
• 2016

PURPOSE. The aim of this study was to compare the radiopacity of 6 modern resin cements with that of human enamel and dentine using the Digora digital radiography system, to verify whether they meet the requirements of ANSI/ADA specification no. 27/1993 and the ISO 4049/2000 standard and assess whether their radiopacity is influenced by the thickness of the cement employed. MATERIALS AND METHODS. Three 3-thickness samples (0.5, 1 and 1.5 mm) were fabricated for each material. The individual cement samples were radiographed on the CCD sensor next to the aluminium wedge and the tooth samples. Five radiographs were made of each sample and therefore five readings of radiographic density were taken for each thickness of the materials. The radiopacity was measured in pixels using Digora 2.6 software. The calibration curve obtained from the mean values of each step of the wedge made it possible to obtain the equivalent in mm of aluminium for each mm of the luting material. RESULTS. With the exception of Variolink Veneer Medium Value 0, all the cements studied were more radiopaque than enamel and dentin (P<.05) and complied with the ISO and ANSI/ADA requirements (P<.001). The radiopacity of all the cements examined depended on their thickness: the thicker the material, the greater its radiopacity. CONCLUSION. All materials except Variolink Veneer Medium Value 0 yielded radiopacity values that complied with the recommendations of the ISO and ANSI/ADA. Variolink Veneer Medium Value 0 showed less radiopacity than enamel and dentin.

• Journal of Korean society of Dental Hygiene
• /
• v.1 no.1
• /
• pp.125-132
• /
• 2001

This study was carried out to investigate the effect of multi or single application of fluoride plus 0.05% NaF solution on the remineralization of dental caries lesion. The microhardness changes of enamel surface were measured after application of fluoride and precipitation of 0.05% NaF solution on 6 groups of cow's tooth on which the artificial carious lesions were formed first. Test groups were calssified into two step application with NaF, $SnF_2$ and APF under different application time conditions plus 0.05% NaF solution(group I, II, III, IV) and single application with APF plus 0.05% NaF solution (group V) and control(0.05% NaF solution only, group IV). The obtained results were as follows. 1. Regarding microhardness change of enamel surface. microhardness increments in group I(NaF for 1 minute+APF for 3 minutes+0.05% NaF solution for 1 minute), II($SnF_2$ 1 min+APF 3 min+NaF sol.), III($SnF_2$ 2 min+APF 2 min+NaF sol.), IV(NaF 2 min+APF 2 min+NaF sol.) and V(APF 4 min+NaF sol.) were significantly greater than group VI.(P<0.05) 2. Microhardness changes of shorter application time of $SnF_2$ (group II) were significantly greater than group III. (P<0.05) 3. Microhardness changes were variable with kinds of fluoride, application sequence and application time of fluoride. but had no relation with the number of fluoride application.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.147-155
• /
• 2008

Three groups of dentin bonding agents (5th generation Single Bond 2.0 and two 6the generation Prompt L-Pop, AdheSE) applied to class V cavities (upper portion with enamel margin and lower portion with dentin margin) prepared at buccal and lingual portion of premolars and molars. Each groups consist of 30 teeth. Devide into two groups, one without thermocycling and the other thermocycled. After then, infiltrate methylene blue into the gap between restoration and tooth. Within non-thermocycled groups, Single Bond 2.0 group shows lesser leakage at enamel margin than other two bonding agents (p <.05) but shows more leakage at dentin margin than other two bonding agents. (p <.05) Within thermocycled groups, Single Bond 2.0 group shows lesser leakage at both enamel and dentin margins. (p <.05)

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.2
• /
• pp.210-219
• /
• 2017

This study aimed to investigate the prevalence and distribution of enamel hypomineralization, including molar-incisor hypomineralization (MIH), among adolescents and assess their correlation with esthetic satisfaction. A total of 1371 adolescents between the ages of 14 and 16 years in Yangsan city were evaluated for enamel hypomineralization, including MIH, according to the European Academy of Paediatric Dentistry (EAPD) criteria. In a parallel survey, esthetic satisfaction about anterior teeth and its correlation with incisor enamel hypomineralization were analyzed. The prevalence of MIH was 13.8% (n = 189), while that of hypomineralization in any permanent tooth was 23.2% (n = 318), which was substantially greater compared to the national prevalence of MIH. Mandibular first molars exhibited the highest prevalence of hypomineralization, followed by maxillary central incisors and mandibular second molars. Among anterior teeth, the most frequently affected site was the incisal edge of maxillary central incisors. A high degree of hypomineralization in anterior teeth was associated with a high demand for esthetic treatment.

• Journal of dental hygiene science
• /
• v.22 no.1
• /
• pp.57-66
• /
• 2022

Background: This study aimed to investigate the effect of selecting commercially available blending teas and applying them to bovine teeth on color change over time. Methods: After selecting healthy bovine teeth, using a cutting-disc, 105 specimens with a dimension of 5×5×3 mm were prepared, and 15 specimens were distributed to each group. Black tea was used as a positive control, water was used as a negative control, and blended tea of five types was used as an experimental group. First, pH and buffering capacity were measured with a pH meter, and tooth color was determined using a spectrophotometer before immersion in the blending tea solution and 1, 5, 7, 14, and 21 days after immersion. Thereafter, the shape change of the enamel surface was observed using a scanning electron microscope, and SPSS ver.26 was used to analyze the color change. Results: The average pH of the five blending teas in the experimental group was 3.78, and the pH of group 3 (strawberry rhubarb) was the lowest at 3.22. The pH levels of black tea and water were 5.19 and 7.30, respectively. The buffering capacity was the highest in group 3 at both pH levels of 5.5 and 7.0. The L^*a^*b^* color change according to immersion time was the largest in group 4 (rooibos yellow flower), and the amount of color change was large in black tea and group 4. As a result of observing the enamel surface of bovine teeth, changes in the surface shape were noted in all groups immersed in the experimental solution for 21 days, except for water. Conclusion: There was a significant difference between the experimental groups in terms of color change according to the immersion time, and color and enamel surface changes were observed in black tea and all experimental groups, except for water.