• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.33-40
• /
• 1981

The more civilized, the more incidence had happened in our daily life, particularly in industrial factories, by traffic accident, and in sports, etc. in the dental field. The accidental trauma is usually involved the teeth and surronuding tissues. And the author intended to study of the traumatic injuries of anterior teeth by individual tooth, age, sex, cause of trauma, and how they were treated. The following results were obtained: 1. The patients with traumatic injuries of the anterior teeth were 1.8% among the total dental out-patients. 2. By the age group, the twenties was most frequent in both sexes, and the teenagers next. 3. The predominant causes of traumatic injuries in the dental field were traffic accident (23.4%), fighting (19.2%), falling (18.5%), and sports (7.3%). 4. In the classification of injuries of the teeth, uncomplicated crown fractures (31.2%), subluxations (14.7%), and the complicated crown fractures (13.2%) were presented. 5. By the individual tooth in the traumatic cases, the upper cental incisors were most frequently injuried (49.8%). 6. In the treatments fillings and endodontic treatments (33.2%), splints (13.5%), extractions (11.7%) were main after care method.

• Journal of Oral Medicine and Pain
• /
• v.19 no.2
• /
• pp.153-168
• /
• 1994

The aim of the present study was to investigate a relation between occlusal wear area and occlusal contact patterns. For the purpose, occlusal wear area were measured in 58 dental students and in 129 patients with temporomandibular disorders(TMDs) from dental casts. Teeth used in this study were from canine to second molar on both sides in upper arch, totally ten. Occlusal wear area on casts was marked by pencil and photocopies, and then, the area was measured with planimeter. Occlusal relation was clinically examined with regard to Angle's classification, chewing side preference, lateral guidance pattern and bruxing and/or clenching habit. T-Scan, electronic occlusal contact analyzer, was used to record occlusal contact number, contact force, contact time and occlusal balance that is TLR(total left-right statistics) during tooth contact. All measurement were repeated 3 times and the average value was used for data processing. The obtained results were as follows : 1. Mean value of occlusal wear area did not differ significantly between dental students and patients. 2. There ws not significant difference in wear area between chewing side and non-chewing side in both groups. 3. Occlusal wear area was significantly increased with age in both groups. 4. Three subgroups divided by Angle's classification did not show any difference in occlusal wear area among them, but three subgroups divided by lateral guidance pattern showed slightly significant difference between canine guide subgroup and group function subgroup in patients. Occlusal wear ares\a in group function subgroup wear larger than canine guide subgroup. 5. Mean value of wear area in patients with bruxing and/or clenching habit did not differ from those in patients without such habit. 6. Correlationship among items related to occlusal contact pattern were highly consistent and significant in dental students and only one item significantly correlated with occlusal wear area was tooth contact time.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.2
• /
• pp.217-229
• /
• 1990

The Applegate-Kennedy classification, the drawing of removable partial denture design using color coding, the selective tissue placement impression method in case of Class I and Class II removable partial dentures, the design of the swing lock attachment of an alternative approach to conventional removable partial denture, the design of the intracoronal or extracoronal attachment, and the removable partial denture design using a rotational path were presented. The following conclusions from the above things were presented : 1. The swing lock attachment removable partial denture can be effective to an alternative approach when the design of conventional removable partial denture is improper with markedly mobile remaining teeth or missing key abutments. 2. Intracoronal or extracoronal attachments must be selected care-fully considering the conditions of the abutment teeth and alveolar ridge whether more occlusal loads to the abutment teeth or to the alveolar ridge are distributed. 3. It must be almost prerequisite that a functional impression is taken in case of Class I and class II removable partial dentures and in case of tooth-borne removable partial dentures, a removable partial denture using rotational path is strong, hygienic, esthetic, and can be accomplished successfully in the clinical aspect when it is properly designed and fabricated through the complete understanding of an indication and a principle. 4. All necessary informations must be achieved with carefully investigated surveying procedure according to each clinical case by Applegate-Kennedy classification which can be helpful and useful in the clinical application and it is important that dentists themselves must be in the habit of drawing a reasonable partial denture design using a color coding in the paper sheet.

• Journal of Periodontal and Implant Science
• /
• v.43 no.6
• /
• pp.276-282
• /
• 2013

Purpose: The aim of this study was to explore root shape abnormalities, to investigate the influence of root form abnormalities on periodontal attachment loss, and to gather basic data to assist in the diagnosis and treatment of aggressive periodontitis. Methods: From January 2010 to June 2012, a survey was conducted of all 3,284 periodontitis patients who visited the Department of Periodontology, Daejeon Dental Hospital, Wonkwang University School of Dentistry. Clinical parameters (probing depth, periodontal attachment loss, missing teeth) were measured and a radiographic examination was performed at the baseline. We classified the root shape abnormality of bicuspids and molars based on Meng classification. Results: The periodontal attachment loss was the highest at the maxillary first molar (6.03 mm). The loss of the second molar was prominent. Type V deformity was shown to be the most common in the second maxillary and mandibular molars (P<0.05). Type V root shape was associated with the highest attachment loss (P=0.01). Conclusions: Considering the small population and limited design of this study, definitive conclusions cannot be drawn. We suggest larger scale, methodologically more sophisticated studies that include normal controls and chronic periodontitis patients to clarify whether root form abnormalities are a potential risk factor for aggressive periodontitis.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.2
• /
• pp.105-112
• /
• 1993

A case of calcifying odontogenic cyst associated with an unerupted tooth which appeared in the left maxillary sinus of a 16-year-old woman, was reported. Clinical examination revealed painless swelling on the left maxillary posterior region and the cheek. Radiographically, this lesion showed a monolocular radiolucent shadow with calcified materials and unerupted maxillary second premolar. Histological examination revealed cystic structure with presence of the ghost cells, calcified tissue and unerupted tooth. This lesion was classified as Type IB of COC according to classification of the Praetorius. After surgical removal of the cyst, the wound healed uneventfully and the lesion is now free of symptoms.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.4
• /
• pp.419-426
• /
• 2016

For this research 20 supernumerary teeth impacted in the maxillary anterior have been extracted and pulp cells have been collected from them. From the collected pulp cells, total of 17 (10 males, 7 females) have been selected as subjects. From this research, the run-time of successive culture of the cell from tooth number pulp tissue was $2.91{\pm}0.29$ days. From the gathering of cells from the initial pulp tissue until gaining 80% confluency took $4.53{\pm}0.94$ which was the longest. The following successive cultures took $2.73{\pm}0.32$ days. Average runtime for female was $2.81{\pm}0.27$ days whereas male had average runtime of $2.98{\pm}0.29$ days. Average run-time for inversion was $2.94{\pm}0.30$ days and for normal location, $2.80{\pm}0.20$ days. Average runtime was $2.92{\pm}0.31$ days and other forms took $2.88{\pm}0.22$ days. In the future, follow up research would be needed to evaluate the efficiency of the cells collected from the initial passage and the latter passage as stem-cells and taking into consideration the less than 3 days'time for the subculture, it could be concluded that the research efficiency and fast cultivation would be sufficiently effective.

• Imaging Science in Dentistry
• /
• v.47 no.3
• /
• pp.149-155
• /
• 2017

Purpose: The classification of impacted maxillary third molars(IMTMs) facilitates interdisciplinary communication and helps estimate the degree of surgical difficulty. Thus, this study aimed to develop a 3-dimensional classification of the position and depth of impaction of IMTMs and to estimate their prevalence with respect to gender and age. Materials and Methods: This cross-sectional retrospective study analyzed images in sagittal and coronal cone-beam computed tomography (CBCT) sections of 300 maxillary third molars. The proposed classification was based on 3 criteria: buccolingual position (buccal, lingual, or central), mesial-distal position (mesioangular, vertical, or distoangular), and depth of impaction (low, medium, or high). CBCT images of IMTMs were classified, and the associations of the classifications with gender and age were examined using analysis of variance with the Scheffe post-hoc test. To determine the associations among the 3 classifications, the chi-square test was used (P<.05). Results: No significant association of the classifications with gender was observed. Age showed a significant relationship with depth of impaction (P=.0001) and mesial-distal position (P=.005). The most common positions were buccal(n=222), vertical(n=184), and low (n=124). Significant associations among the 3 tested classifications were observed. Conclusion: CBCT enabled the evaluation of IMTMs in a 3-dimensional format, and we developed a proposal for a new classification of the position and depth of impaction of IMTMs.

• The Journal of the Korean dental association
• /
• v.57 no.3
• /
• pp.149-160
• /
• 2019

Atrophic alveolar ridge of maxillary anterior area is commonly observed after the extraction of teeth in patients with severely compromised periodontal disease, causing difficulties with implant placement. Successful esthetics and functional implant rehabilitation rely on sufficient bone volume, adequate bone contours, and ideal implant positioning and angulation. The present case report categorized the ridge augmentation techniques using guided bone regeneration (GBR) on the maxillary anterior site by Seibert classification. Case I patient presented for implant placement in the position of tooth #11. The alveolar ridge was considered a Seibert classification I ridge defect. Simultaneous implant placement and GBR were performed. Eight months after implantation, clinical and radiological examinations were performed. Case III patient presented with discomfort due to mobility of the upper maxillary anterior site. Due to severe destruction of alveolar bone, teeth #11 and #12 were extracted. After three months, the alveolar ridge was considered a Seibert classification III ridge defect. A GBR procedure was performed; implantation was performed 6 months later. Approximately 1-year after implantation, clinical and radiological examinations were performed. During the whole treatment period, healing was uneventful without membrane exposure, severe swelling, or infection in all cases. Radiographic and clinical examinations revealed that atrophic hard tissues and buccal bone contour were restored to the acceptable levels for implant placement and esthetic restoration. In conclusion, severely resorbed alveolar ridge of the maxillary anterior area can be reconstructed with ridge augmentation using the GBR procedure so that dental implants could be successfully placed.

• Journal of Korean society of Dental Hygiene
• /
• v.3 no.1
• /
• pp.25-43
• /
• 2003

In Korea, changes in children's diet patterns accelerate their physical growth and development: frequent snacking has been presumed to be a major cause of increasing dental caries. The present study attempts to clarify the relationship between the physical development of growing children and their tooth decay. For this purpose, 632 six-grade children in 4 elementary school located in Urban(Seoul) and Rural(Po-gok, Yang-In) were classified into three groups based on the Weight Length Index(WLI), known to reflect the nutritional conditions of school-age children, and the relationship was analyzed between each group and the variables considered to be related with dental caries. The result is as follows: The average weight and height of the male is $44.88{\pm}10.89$ kg, $148.49{\pm}7.33$ cm and female is $43.35{\pm}9.60$ kg, $149.23{\pm}6.73$ cm, respectively, which are in the similar level with the Korean Physical Standard. The classification of the children by the WLI reveals a relatively high distribution of over-weighted child ren - 212 persons, 335% of the entire population. The DMFT Index was a little high in the rural area(3.15 teeth in urban and 3.31, in rural). Among the groups of children classified by the WLI, the over-weight group have the highest DMFT index(3.69 teeth). The relationship between the frequency of taking in basic nutrients and the DMFT index is also found: the relationship is not evident in case of the foods containing rich calcium, protein, as well as fruits and vegetables. But, in the protein-rich food, higher frequency of its intake means significantly lower DMFT index in the normal-weight group of the urban children. In case of carbohydrate, higher frequency of its intake means significantly higher DMFT index in all the groups of the rural children. The DMFT index has some correlations with the relevant variables: the index has a positive correlation with the frequency of snacking, and a negative correlation with the economic status. That is, the higher the frequency of snacking is, and the lower the economic status is, the higher the DMFT index may be. In the logistic multiple regression analysis conducted with the presence of DMFT as a dependent variable, only the frequency of tooth brushing is turned to be a variable affecting the presence of either decayed, missing, or filled teeth. Based on the above result, the variables affecting the DMFT index are a time spent on eating, frequency of intake of protein and carbohydrate for a week, frequency of snacking, regular dental check-ups, preventive behaviors for oral health(fluoride gargling, tooth brusing after each meal, proper tooth brushing method). These variables have a relationship with the DMFT index, but the degree is somewhat different between the groups classified either by the region or by the WLI. Therefore, appropriate nutrition management should be conducted according to the individual's nutritional conditions when the services like nutritional education are provided based on the closely-examined characteristics of each target group. And, at the same time, oral health education should be strengthened, and its importance should also be emphasized so that people can pay attention to their own oral health.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.25 no.1
• /
• pp.15-24
• /
• 2016

It is considered an implant failure when there is esthetic problems in the anterior area although the prosthesis function normally. In 2003, Dr. Kan et al stated that implant bone level is determined by the adjacent teeth. After that many scholars have studied how can achieve the esthetics result on adjacent teeth bone loss cases. In 2012, Dr. Takino published an article in Quintessence. He summarized previous articles and reclassified the defects from class 1 through 4. Class 1 and 2 depicts a situation where there is no bone loss on adjacent teeth. In Class 3 and 4, interproximal bone loss extends to the adjacent tooth. If one side is involved, it is Class 3. If both sides are involved, it is Class 4. The clue for esthetic implant restoration is whether bone loss extends to adjacent tooth or not. If the bone level of adjacent tooth is sound, we can easily achieve the esthetic but the bone level is not sound, the surgery will be complicated and the esthetic result will be unpredictable. So regenerative surgery for adjacent tooth is necessary for long-term maintenance. But the options and process were so complicated, the purpose of this article is to report the method simplify the surgery and gain a similar outcome.