• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2004.11a
• /
• pp.13-20
• /
• 2004

Grid system has the potential to resolve the current need of bioinformatics for super-computing environment inexpensively. There are already several Grid applications of bioinformatics tools. To solve the real-world bioinformatics problems, however, the various integration of each tool is necessary in addition to the implementation of more basic tools. Workflow based problem solving environment can be the efficient solution for this type of software development. There are still heavy overhead, however, to develop and implement workflow model on current Grid system. He re we propose a model of simple problem solving environment that enables component based workflow design of integrated bioinformatics applications on Grid environment by using Condor functionalities. We realized this model for practical bioinformatics solutions of a genome sequence analysis and a comparative genome analysis. We implemented necessary bioinformatics tools and interfacing tools as the components, and combine them in the workflow model of each solution by using the tools presented in Condor.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.5
• /
• pp.401-407
• /
• 1984

In the previous paper, part I, the principal stresses were investigated on the normal tools and the workpieces whose materials were the same epoxy resin. In this paper, are measured and compared the stresses on the normal tools and restricted tools which have three various rake angles. Each restricted tool above has the same restricted angle. The workpieces used in this experiment are made of high quality lead. The photoelastic measuring device is attached to the saddle of the lathe and carried at the same speed as the cutting tool is feeded. The results obtained are summarized as follows; The shear stresses on the tip of the restricted tools of the rake angle .alpha.=12.deg. and .alpha.=0.deg. are less than those of normal tools. But, for the rake angle .alpha.=-12.deg., the former is greater than the latter. The result of photoelastic method shows that in the range of rapid decreasing of normal stress on the tool edge, the shear is maintaining a certain value.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.4
• /
• pp.123-129
• /
• 1998

Ceramic and CBN tools are available for the difficult-to -cut-materials such as hardened carbon tool steel. stainless steel and etc. Ceramic tools are suitable for continuous turning cut, not for intermittent milling cut. Ceramic tools are likely to be chipped and abruptly broken before the appearance of normal wear in turning. In this study, TiN coated ceramic tools were found to restrain the chipping, breaking and early fracture and to increase the critical cutting velocity owing to TiN coating in PVD method.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.496-501
• /
• 2015

In this study, calibration procedure of power assembly tools is suggested and methods are developed for calculating measurement uncertainty. Fist of all, the calibration of joint simulator bench (JSB) was carried out for maintaining traceability and the uncertainty components of JSB were analyzed. The influences of tool speed, tolerance, temperature and length of the adapter were examined by the torque measurement values through experiments. From this research, credibility for calibration results could be enhanced. This experimental results, being used as an effective tool for calibration of power assembly tools, will provide and improve the accuracy of the use of the power assembly tools.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.142-146
• /
• 1993

The vibrations of the main spindle of the M/C tools are most important in the consideration of the dymamic performance of the M/C tools. In order to resolve and predict the dynamic behaviour of the main syindle it is necessary to have the mathematical model of the system. The system identification is the procedure to provide us with the mathematical model of the procedure of the system identification of the main spindle of the M/C tools to predict the dynamic behaviour of the machine and further to have the basis for the design of M/C tools.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.1
• /
• pp.76-82
• /
• 2002

This paper presents an experimental study of the effect of cutting tool materials on surface quality when turning hardened steels. Machining tests on a lathe are performed using polycrystalline cubic boron nitride (PCBN) and ceramic tools at various cutting conditions without coolant. From the experiments, it is observed that the radial force is the largest force component regardless the type of tool used. The specific cutting energy for the hard turning is estimated to be considerably smaller than the specific grinding energy. It is also found that cutting force and surface roughness with the PCBN tools are higher and better than those with the ceramic tools under the same cutting condition. It is due that the PCBN tools transfer the generated heat more effectively than the ceramic tools due to their higher thermal conductivity. The optimal cutting conditions for the best surface quality are selected by using an orthogonal array concept.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.32-37
• /
• 1996

Using the are ion plating(AIP) process, TiN coating was deposited onto high speed steel substrates. The effects of coating thickness, titanisum interlayer and shield on wear resisting capability of the coated tools were investigated. In order to promote good adhesion between the substrate and the TiN coating a thin Ti interlayer was deposited. A shield was set up also between Ti target and high speed steel substrates to prevent molten droplets from reaching the substrate. Three series of varying thickness of TiN coated layer were prepared with or without the Ti interlayer, and with or without the shield. The tools with the Ti layer and the shield showed longer tool lifes than those of other series of tools and the commercially available TiN coated HSS tools, by up to 70%.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.1
• /
• pp.73-85
• /
• 1993

This paper presents a design and implementation of CAD(Computer-Aided Design) system with tools and design environments for IC(Intergrated Circuits)design. The CAD system can be easily installed in various sites with limited resources, since most CAD tools and design environments are available in the public-domain and Unix & X Window-based PC-386 and Workstation is used for the hardware platform. In order to improve the flexibility of the CAD system, objects are defined in the context of tools and environments` and object tables are programmed to describe the integration of CAD tools and design environments. During the execution, tool-objects deal with intertool communication and round-robin mechanism to incrementally control the execution of CAD tools. The IC design of LPC(Linear Predictive Coding) Speech Synthesizer is carried out to find out improvements and bugs of the CAD system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.2
• /
• pp.82-90
• /
• 2006

Reconfigurability of machine tools is one of the critical factors to realize the responsive manufacturing systems to satisfy the mass customization production. This paper presents the methods to model the reconfigurable machine tools (RMTs) on Internet in response to change in the machining requirements. Specifically, the structure and motion model of machine tools using module combination rules and connectivity graph are developed. And we developed Internet-based simulator for designing of RMTs (ISD-RMT). In response to the user requirements, various structures of RMTs can be derived using the module combination rules and connectivity graph relationships. In addition, the user can verify generating structures through the control and simulation procedures.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.579-584
• /
• 1999

The purpose of the present paper are not to develope machine tools of new concepts and advanced mechanisms but to introduce and apply new methods and concepts in the design procedure by using and changing the previously existing technologies. In this paper 3D modeller was proposed for designing machine tools and the design and the better manufacturability checking than 2D one so that design error was dramatically reduced. As designer may easily understand the real shape of a part and assembly object, it's easy to draw the drawings not only in a conceptual design but also in a detailed design. Also, design automation software enabled designer to consider the real important design parameters by reducing time to spend in estimating and calculating the strength of the model by the computer aided automatic calculation instead of a tedious and complex calculation by manual method and help him to easily make the decision for selecting the stocks and design the structure of part or unit of machine tools.