• Wind and Structures
• /
• v.23 no.4
• /
• pp.313-350
• /
• 2016

Taipei 101 Tower, which has 101 stories with height of 508 m, is located in Taipei where typhoons and earthquakes commonly occur. It is currently the second tallest building in the world. Therefore, the dynamic performance of the super-tall building under strong wind actions requires particular attentions. In this study, Large Eddy Simulation (LES) integrated with a new inflow turbulence generator and a new sub-grid scale (SGS) model was conducted to simulate the wind loads on the super-tall building. Three-dimensional finite element model of Taipei 101 Tower was established and used to evaluate the wind-induced responses of the high-rise structure based on the simulated wind forces. The numerical results were found to be consistent with those measured from a vibration monitoring system installed in the building. Furthermore, the equivalent static wind loads on the building, which were computed by the time-domain and frequency-domain analysis, respectively, were in satisfactory agreement with available wind tunnel testing results. It has been demonstrated through the validation studies that the numerical framework presented in this paper, including the recommended SGS model, the inflow turbulence generation technique and associated numerical treatments, is a useful tool for evaluation of the wind loads and wind-induced responses of tall buildings.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.881-886
• /
• 2007

This study was to develope a vibrotactile display system using windows media player from digital audio signal. WMPlayer10SDK system which was plug-in tool by microsoft windows media player provided its video and audio signal information. The audio signal was tried to be change into vibrotactile display. Audio signal had 4 sections such as 8bit, 16bit, 24bit, and 32bit. Each section was computed its frequency and vibrato scale. And data was transferred to 38400bps network port(COM1) for vibration. Using this system was able to develop the music suit which presented tactile feeling of music beyond sound. Therefore, it may provide cross modal technology for fusion technology of human senses.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.6
• /
• pp.794-801
• /
• 2012

Finite Element Method is a strong tool to analyse static and dynamic problem of a structure. FEM is a good method for static problem, but for dynamic problem there are some differences between real phenomena and analyzed phenomena. Therefore some modifications are needed to identify two results. In this paper authors propose a genetic algorithm method 1) to adjust dimensions of plate for identifying natural frequencies, 2) to fit amplitude of FEM Frequency Response Function(FRF) onto it of real FRF. Analysis by raw FEM data gave questions if the results were for the same object. By only adjusting Young's modulus much better accordances were obtained, but limitation existed still. Very good agreements were achieved by shape modification and damping coefficient identification.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.5
• /
• pp.57-66
• /
• 2017

In this paper, we suggest a novel physics-based real-time animation technique for vehicles, and introduce an easy and intuitive animation authoring tool which uses our proposed technique. After a user specifies a trajectory of a virtual car as input, our system produces a more accurate simulation faster than a previous research result. This is achieved by a trajectory splitting method based on directional features and a trajectory library. As a result, the user can create not only a car animation including lane changing and passing, but also a crash animation which is a rarely researched topic. Also, we propose a virtual car structure that approximates a real car's structure for real-time simulation, the resulting animation shows high plausibility such as a small vibration which occurs when the virtual car breaks and a deformation of when a car accident happens.

• Composites Research
• /
• v.13 no.6
• /
• pp.39-46
• /
• 2000

Electrical discharge machining (EDM) cuts metal by discharging electric current across a thin gap between tool and workpiece. Electrical discharge wire cutting, a special form of EDM, uses a continuously moving conductive wire as an electrode, and is widely used for the manufacture of punches, dies and stripper plates. In the wire cutting process, the moving wire is usually supported by cantilever arm and wire guides. As the wire traveling speed has been increased in recent years to improve productivity, the vibration of the cantilever arm occurs, which reduces the positional accuracy of the machine. Therefore, the design and manufacture of the cantilever arm with high dynamic characteristics have become important as the machining speed increases. In this paper, the cantilever arm for guiding the moving wire was designed and manufactured using carbon fiber epoxy composite in order to improve the static and dynamic characteristics. Specimens for the composite cantilever arm were manufactured and tested to investigate the effect of the number of reinforcing plies and length fitted to steel flange on the load capacity. Also, the finite element analysis using layer and contact elements was performed to compare the calculated results with the experimental ones. From the results, the prototype of the composite cantilever arm for the electrical discharge wire cutting machine was manufactured and the static and dynamic characteristics were compared with those of the conventional steel cantilever arm.

• Journal of the Mineralogical Society of Korea
• /
• v.14 no.2
• /
• pp.119-127
• /
• 2001

FTIR spectroscopic study was undertaken on dickite and pyrophyllite with Si and Al cations in the far-infrared(Far-IR) and mid-infrared (Mid-IR) regions, respectively. Attempts were made to present bonding information and make assignments on the absorption bands of dickite in the Far-IR region. Dickites contain a small proportions or kaolinite or nacrite layers. FTIR can be used as a potential tool for characterizing the presence of mixed-layer with different polytypes of the kaolin minerals. There is no clear relationship between Hinckley index and crystallinity of dickite. Although pyrophyllite shows a strong OH stretching band at 3673-3676 $cm^{-1}$ / corresponding to an inner hydroxyl group, the weak band at $3645-3648 cm^{-1}$ seems to be due to the symmetric vibration if the symmetry of the structure is not ideal, probably due to the presence of trace Fe or mixture phases of 1Tc and 2M polytypes.

• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.665-682
• /
• 2015

Structural identification or St-Id is 'the parametric correlation of structural response characteristics predicted by a mathematical model with analogous characteristics derived from experimental measurements'. This paper describes a St-Id exercise on Humber Bridge that adopted a novel two-stage approach to first calibrate and then validate a mathematical model. This model was then used to predict effects of wind and temperature loads on global static deformation that would be practically impossible to observe. The first stage of the process was an ambient vibration survey in 2008 that used operational modal analysis to estimate a set of modes classified as vertical, torsional or lateral. In the more recent second stage a finite element model (FEM) was developed with an appropriate level of refinement to provide a corresponding set of modal properties. A series of manual adjustments to modal parameters such as cable tension and bearing stiffness resulted in a FEM that produced excellent correspondence for vertical and torsional modes, along with correspondence for the lower frequency lateral modes. In the third stage traffic, wind and temperature data along with deformation measurements from a sparse structural health monitoring system installed in 2011 were compared with equivalent predictions from the partially validated FEM. The match of static response between FEM and SHM data proved good enough for the FEM to be used to predict the un-measurable global deformed shape of the bridge due to vehicle and temperature effects but the FEM had limited capability to reproduce static effects of wind. In addition the FEM was used to show internal forces due to a heavy vehicle to to estimate the worst-case bearing movements under extreme combinations of wind, traffic and temperature loads. The paper shows that in this case, but with limitations, such a two-stage FEM calibration/validation process can be an effective tool for performance prognosis.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.6
• /
• pp.75-82
• /
• 2002

Design for a quiet operation of fluid power system requires the understanding of noise and vibration characteristics of the system. It's not easy to analyze noise problem in hydraulic cylinder used in typical actuator Because they've got complex fluid dynamics. One of the fundamental problems associated with the hydraulic system is the pulsating flow in pipe lines, which can be tackled by the analysis under simplifying assumptions. The present study focuses on theoretic analysis and experimental study on the dynamics of laminar pulsating flow in a circular pipe. We analyze the propagation characteristics of the pressure pulse within a hydraulic pipe line taking into account the pulsating flow frequency variation. We also measure instantaneous pressure pulses within pipe line to identify the transfer functions. We conduct series of experiments to investigate the propagation characteristics of pressure pulse for various pressure of pulsating flow. The working fluid of the present study is ISO VG46 and the temperature ranges from 20 to $60^{\circ}$ with normal pressure at 4000kPa. The flow rate is measured by using an ultrasonic flow meter. Pressures at fixed upstream and downstream positions are measured concurrently. The electric signals of the pressure sensor are stored and analyzed using a system analyzer(PKE 983 series). The frequency is varied in the range of 10~500Hz. The Reynolds number is kept below 2,000. In the present study, boundary condition was varied by installing a surge tank and an orifice at the end of pipe. Experimental and theoretical results were compared each other under various boundary conditions.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.5
• /
• pp.35-40
• /
• 2010

NAND flash memory has been widely used than traditional HDD in PDA and other mobile devices, embedded systems, PC because of faster access speed, low power consumption, vibration resistance and other benefits. DiskSim and other HDD simulators has been developed that for find improvements for the software or hardware. But there is a few Linux-based simulators for NAND flash memory and SSD. There is necessary for Windows-based NAND flash simulator because storage devices and PC using Windows. This paper describe for development of simulator-NFSim for FTL performance analysis in NAND flash. NFSim is used to measure performance of various FTL algorithms and FTL wear-level. NAND flash memory model and FTL algorithm developed using Windows Driver Model and class for scalability. There is no need for another tools because NFSim using graph tool for data measure of FTL performance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.155-163
• /
• 2006

Car seat is one the most important element to make comfortable drivability. It can absorb the impact or vibration during driving state. In addition to those factors, it is needed to have enough strength for passenger safety. From energy efficiency and environmental point of view lighter passenger car seat frame becomes hot issue in the auto industry. In this paper, weight optimization methodology is investigated for commercial car seat frame using CAE. Optimized designs for seat frame are developed using commercially available finite element code(ANSYS) and design of experiment method. At first, car seat frame is modelled using 3-D computer aided design tool(CATIA) and simplified for finite element modelling. Finite element analysis is carried out for the case of FMVSS 202 Head Restraint test to check the strength of the original seat frame. Two base brackets are selected as optimized elements that are the heaviest parts in the seat frame. After finite element analysis for the brackets with similar load condition to the previous test optimization technique is applied for 10% to 50% weight reduction. Design of experiment is utilized to obtain optimization design for the bracket based on the modified 50% weight reduction model in which outer shape of the bracket is conserved. Weight optimization models result in the decrease of the strength in spite of weight reduction. The more design points should be considered to get better optimized model. The more advanced optimization technique may be utilized for more parts of the seat frame to increase whole seat frame characteristics in the future.