This study is to evaluate the climate change impact on future storage behavior of Chungju dam($2,750{\times}10^6m^3$) and the regulation dam($30{\times}10^6m^3$) using SWAT(Soil Water Assessment Tool) model. Using 9 years data (2002~2010), the SWAT was calibrated and validated for streamflow at three locations with 0.73 average Nash-Sutcliffe model Efficiency (NSE) and for two reservoir water levels with 0.86 NSE respectively. For future evaluation, the HadCM3 of GCMs (General Circulation Models) data by scenarios of SRES (Special Report on Emission Scenarios) A2 and B1 of the IPCC (Intergovernmental Panel on Climate Change) were adopted. The monthly temperature and precipitation data (2007~2099) were spatially corrected using 30 years (1977~2006, baseline period) of ground measured data through bias-correction, and temporally downscaled by Change Factor (CF) statistical method. For two periods; 2040s (2031~2050), 2080s (2071~2099), the future annual temperature were predicted to change $+0.9^{\circ}C$ in 2040s and $+4.0^{\circ}C$ in 2080s, and annual precipitation increased 9.6% in 2040s and 20.7% in 2080s respectively. The future watershed evapotranspiration increased up to 15.3% and the soil moisture decreased maximum 2.8% compared to baseline (2002~2010) condition. Under the future dam release condition of 9 years average (2002~2010) for each dam, the yearly dam inflow increased maximum 21.1% for most period except autumn. By the decrease of dam inflow in future autumn, the future dam storage could not recover to the full water level at the end of the year by the present dam release pattern. For the future flood and drought years, the temporal variation of dam storage became more unstable as it needs careful downward and upward management of dam storage respectively. Thus it is necessary to adjust the dam release pattern for climate change adaptation.
Although the dominant land use at the Imha-dam watershed is forest areas, soil erosion has been increasing because of intensive agricultural activities performed at the fields located along the stream for easy-access to water supply and relatively favorable topography. In addition, steep topography at the Imha-dam watershed is also contributing increased soil erosion and sediment loads. At the Imha-dam watershed, outflow has increased sharply by the typhoons Rusa and Maemi in 2002, 2003 respectively. In this study, the Soil and Water Assessment Tool (SWAT) model was evaluated for simulation of flow and sediment behaviors with long-term temporal and spatial conditions. The precipitation data from eight precipitation observatories, located at Ilwol, Subi and etc., were used. There was no significant difference in monthly rainfall for 8 locations. However, there was slight differences in rainfall amounts and patterns in 2003 and 2004. The topographical map at 1:5000 scale from the National Geographic Information Institute was used to define watershed boundaries, the detailed soil map at 1:25,000 scale from the National Institute of Highland Agriculture and the land cover data from the Korea Institute of Water and Environment were used to simulate the hydrologic response and soil erosion and sediment behaviors. To evaluate hydrologic component of the SWAT model, calibration was performed for the period from Jan. 2002 to Dec. 2003, and validation for Jan. 2004 to Apr. 2005. The $R^2$ value and El value were 0.93 and 0.90 respectively for calibration period, and the $R^2$ value and El value for validation were 0.73 and 0.68 respectively. The $R^2$ value and El value of sediment yield data with the calibrated parameters was 0.89 and 0.84 respectively. The comparisons with the measured data showed that the SWAT model is applicable to simulate hydrology and sediment behaviors at Imha dam watershed. With proper representation of the Best Management Practices (BM Ps) in the SWAT model, the SWAT can be used for pre-evaluation of the cost-effective and sustainable soil erosion BMPs to solve sediment issues at the Imha-dam watershed. In Korea, the Universal Soil Loss Equation (USLE) has been used to estimate the soil loss for over 30 years. However, there are limitations in the field scale mdel, USLE when applied for watershed. Also, the soil loss changes temporarily and spatially, for example, the Imha-dam watershed. Thus, the SW AT model, capable of simulating hydrologic and soil erosion/sediment behaviors temporarily and spatially at watershed scale, should be used to solve the muddy water issues at the Imha-dam watershed to establish more effective muddy water reduction countermeasure.
Along with the rapid growth of the food service industry, food safety requirements and hygiene are increasing in importance in restaurants and hotels. Accordingly, there is a need for quick and practical monitoring techniques to determine hygiene status in the field. In this study, we investigated 5 domestic 5-star hotels specifically, personal hygiene (hands of workers), cooking utensils (knife, cutting board, food storage container, slicing machine blade, ice-maker scoop) and other facilities (refrigerator handle, sink). In addition, we examined the hygiene management status of customer contact points (tongs for buffet, etc.) to derive the correlation between the ATP values as a, a verification method. As a result of our five-hotel survey, we found that cooking utensils and personal hygiene were relatively sanitary compared to other inspection items (cookware 92.2%, personal hygiene 91.4%, facilities and equipment 76.19%, customer contact items 88.6%). According to our ATP-based mothod, kitchen utensils (51 ± 45 RLU/25㎠) were relatively clean compared to other with facilities and equipment (167 ± 123 RLU/25㎠). In the present study, we also evaluated the usefulness of the ATP bioluminescence method for monitoring surface hygiene at hotel restaurants. After correlation analysis of surveillance of hygienic status points and ATP assay, most results showed negative and high correlation (-0.64--0.89). Our ATP assay (92 ± 67 RLU/25㎠) of each item after cleaning showed signigicantly reduced results compared to the ATP assay (1020 ± 1254 RLU/25㎠) for normal status, thereby indicating its suitability as a tool to verify the validity of cleaning. By our results, ATP bioluminescence could be used as an effective tool for visual numerical evaluation of invisible contaminants.
This study compares and analyzes the Soil and Water Assessment Tool (SWAT) and Terra MODIS (Moderate Resolution Imaging Spectroradiometer) as coniferous, deciduous and mixed forest with Yongdam Dam upstream (904.4 km2). The hydrologic evaluation period was set to 10 years from 2010 to 2019, and the applicability of the 8-day MOD15A2 Leaf Area Index (LAI) data, 3 TDR (Time Domain Reflectometry) (GB, JC, CC), and 1 Flux Tower (DU) evaporation volume (YDD) data was simulated. As a result, the R2 of coniferous forest, deciduous forest and mixed forest are 0.95, 0.89, 0.90, soil moisture and evaportranspiration stations R2 were analyzed at 0.50 to 0.55 and 0.51, respectively, with R2 at 0.74, RMSE 2.75 mm/day, NSE 0.70 and PBIAS 14.3% for Yongdam inflow. Based on the calibrated and validated watersheds, the annual average evaportranspiration was calculated as coniferous 469.7 mm, deciduous 501. mm and 511.5 mm mixed forest, total runoff were estimated at coniferous 909.8 mm, deciduous 860.6 mm and 864.2 mm mixed forest. In the case of annual average evaportranspiration, it was evaluated that deciduous were high, but in the case of streamflow, it was evaluated that coniferous were high. Unlike other hydrologic with similar patterns throughout the year, the average annual evapotranspiration was about 7% higher than coniferous due to the higher evapotranspiration of deciduous with high leaf area index in summer and fall. In addition, deciduous were 9% and 6% higher for surface runoff and lateral flow, but the groundwater of coniferous was 77% higher. Therefore, it was confirmed that the total runoff was in order of coniferous, mixed forest, and deciduous.
This study probes the effect of loyalty program on the customer retention based on the real transaction data(n=2,892) acquired from education service industry. We try to figure out the outcomes of reward program through more than 1 year-long data gathered and analyzed according to quasi-experimental design(i.e., before and after design). We adopt this kinds of research scheme in regard that previous studies measured the effect of loyalty program by dividing the customers into two group(i.e., members vs. non-members) after the firms or stores had started the program. We believe that it might not avoid the self-selection bias. The research questions of this study could be explained such as: First, most research said that the loyalty programs could increase the customer loyalty and contribute to the sustainable growth of company. But there are little confirmation that this promotional tool could be justified in terms of financial perspective. Thus, we are interested in both the retention rate and financial outcomes caused by the introduction of loyalty programs. Second, reward programs target mainly current customer. Especially CRM(customer relationship management) said that it is more profitable for company to build positive relationship with current customer instead of pursuing new customer. And it claims that reward program is excellent means to achieve this goal. For this purpose, we check in this study whether there is a interaction effect between loyalty program and customer type in retaining customer. Third, it is said that dis-satisfied customers are more likely to leave the company than satisfied customers. While, Bolton, Kannan and Bramlett(2000) claimed that reward program could contribute to minimize the effect of negative service by building emotional link with customer, it is not empirically confirmed. This point of view explained that the loyalty programs might work as exit barrier to current customer. Thus, this study tries to identify whether there is a interaction effect between loyalty program and service experience in keeping customer. To achieve this purpose, this study adopt both Kaplan-Meier survival analysis and Cox proportional hazard model. The research outcomes show that the average retention period is 179 days before introducing loyalty program but it is increased to 227 days after reward is given to the customers. Since this difference is statistically significant, it could be said that H1 is supported. In addition, the contribution margin coming from increased transaction period is bigger than the cost for administering loyalty programs. To address other research questions, we probe the interaction effect between loyalty program and other factors(i.e., customer type and service experience) affecting it. The analysis of Cox proportional hazard model said that the current customer is more likely to engage in building relationship with company compared to new customer. In addition, retention rate of satisfied customer is significantly increased in relation to dis-satisfied customer. Interestingly, the transaction period of dis-satisfied customer is notably increased after introducing loyalty programs. Thus, it could be said that H2, H3, and H4 are also supported. In summary, we found that the loyalty programs have values as a promotional tool in forming positive relationship with customer and building exit barrier.
Prior to making choices among online products and services, consumers often search online product reviews written by other consumers. Online product reviews have great influences on consumer behavior because they are believed to be more reliable than information provided by sellers. However, ever-increasing lists of product reviews make it difficult for consumers to find the right information efficiently. A customized search mechanism is a method to provide personalized information which fits the user's requirements. This study examines effects of a customized search mechanism and perceived similarity between consumers and product reviewers on consumer behaviors. More specifically, we address the following research questions: (1) Can a customized search mechanism increase perceived similarity between product review authors and readers? (2) Are product reviews perceived as more credible when product reviews were written by the authors perceived similar to them? (3) Does credibility of product reviews have a positive impact on acceptance of product reviews? (4) Does acceptance of product reviews have an influence on purchase intention of the readers? To examine these research questions, a lab experiment with a between-subject factor (whether a customized search mechanism is provided or not) design was employed. In order to enhance mundane realism and increase generalizability of the findings, the experiment sites were built based on a real online store, cherrya.com (http://www.cherrya.com/). Sixty participants were drawn from a pool that consisted of undergraduate and graduate students in a large university. Participation was voluntary; all the participants received 5,000 won to encourage their motivation and involvement in the experiment tasks. In addition, 15 participants, who selected by a random draw, received 30,000 won to actually purchase the product that he or she decided to buy during the experiment. Of the 60 participants, 25 were male and 35 were female. In examining the homogeneity between the two groups, the results of t-tests revealed no significant difference in gender, age, academic years, online shopping experience, and Internet usage. To test our research model, we completed tests of the measurement models and the structural models using PLS Graph version 3.00. The analysis confirmed individual item reliability, internal consistency, and discriminant validity of measurements. The results show that participants feel more credible when product reviews were written by the authors perceived similar to them, credibility of product reviews have a positive impact on acceptance of product reviews, and acceptance of product reviews have an influence on purchase intention of the readers. However, a customized search mechanism did not increase perceived similarity between product review authors and readers. The results imply that there is an urgent need to develop a better customized search tool in order to increase perceived similarity between product review authors and readers.
Journal of the Korean Association of Geographic Information Studies
/
v.12
no.2
/
pp.82-98
/
2009
This study applied SWAT model to analyze suspended sediment load that is influence on the high density turbid water in Donghyang and Cheoncheon basin, which are located in the upstream of Yongdam Dam. GIS data such as DEM, land cover map and soil map, and meteorological data were used as the input data of SWAT model. And the rating curve equation and Q-SS equation of Donghyang and Cheoncheon gauge station were applied as the measured values of them. As the result of flowout, the coefficient of determination ($R^2$) and the Nash-Sutcliffe coefficient of efficiency (EI) of model calibration showed high as 0.87 and 0.87 at Donghyang gauge station, and the $R^2$ and EI of model validation were high as 0.95 at Cheoncheon gauge station. Also, as the result of suspended sediment load, the $R^2$ and EI of model calibration were high as 0.77 and 0.76 at Donghyang gauge station, and the $R^2$ and EI of model validation marked high as 0.867 and 0.80 at Cheoncheon gauge station. It is considered that the suspended sediment load of 2003 showed the highest due to rainfall amounts and rainfall intensity in using SWAT model. The results of suspended sediment modeled in this study can be applied to the decision-making support data for the evaluation of soil erosion possibility and turbid water potential in the management of reservoir.
This study applies the concepts of sociotechnical theory and role theory in order to verify the effects of stress (that is, technostress) created from information and computer technology (ICT) concerning role stress and performance. We suggest diverse perspectives concerning the elements leading to technostress along with the stress-creating process of ICT among organizational members. The following four major hypotheses are proposed: (1) Technostress is positively related to role stress (e.g., conflict and overload of roles), adverse psychological outcomes, and adverse IS use related outcomes, (2) Role conflict is positively related to adverse psychological outcomes and adverse IS use related outcomes, (3) Role overload is positively related to adverse psychological outcomes and adverse IS use related outcomes, and (4) Innovation support will play as a moderator between technostress, roles tress, adverse psychological outcomes and adverse IS use related outcomes. A partial least square (PLS) with data gathered data from ICT users of organizations was used to verify the proposed hypotheses. The results supported our claims excluding the hypothesis associated to the relationship between technostress and role stress. We suggest a theoretical implication based on the verification of technostress related to the current concept of stress experienced by individuals within organizations. We also propose that a practical implication concerning the opposite effect of technostress, can be utilized as a method of reducing role stress, and suggests a diagnostic tool for assessing the degree of technostress within organizations.
Journal of the Korea Academia-Industrial cooperation Society
/
v.14
no.7
/
pp.3184-3190
/
2013
These days, the great part of design processes in the field of ship or offshore manufacturing are planed and implemented using the customized CAD system for each ship-building companies. It means that all information for design and production could be extracted and reused at the useful other area cost considerable time and efforts. The representative example is the estimation of welding length and material amount which is demanded during the construction of ship or offshore structures. The proper estimation of welding material to be used and the usage of them at the stage of schedule planning is mostly important to achieve the seamless process of production and expect the costing in advance. This study is related to the calculation of welding length and needed material amount at the stage of design complete utilizing the CAD system. The calculated amount are classified according to welding position, stage, block, bevel and welding type. Moreover it is possible to predict the working time for welding operation and could be used efficiently for the cost management using the results of this research.
Journal of the Korea Academia-Industrial cooperation Society
/
v.13
no.2
/
pp.615-627
/
2012
The market penetration of the smart phones has brought significant changes to the related industries. As the mobile phone market as well as the smart phone application market are growing rapidly, competition among small-size application developers has become severe. However, due to the severe competition and expensive market entry costs, the developers argue that it is necessary to develope the applications from the perspective of the users. However, studies on application development from the users' perspectives are still in the early stages and they have not provided various approaches. Therefore, based on the Open Coding method of Ground Theory, this study collected data on applications review from related communities and blogs of Korean web portal sites, and identified indices which users consider important when they use the applications. In addition, we conduct a comparative analysis between those indices by calculating their frequency of exposure. As a result, a total of 30 sub-categories of indicators such as amusement, controllability, versatility and ease of use appeared to be predominant to users and those lower categories were grouped into five categories; sensibility, design, technology, price, and social skills. The results of this study suggest to the application developers the guidelines of user oriented design and development. It can be used to develop the evaluation tool for application usability.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.