• 한국콘텐츠학회논문지
• /
• 제11권3호
• /
• pp.477-486
• /
• 2011

본 논문에서는 컴퓨터 사용 시간과 시력 저하 관계를 분석했다. 우선 첫째로, 조사에 참여한 학생들을 성별, 학년, 시력과 안경 착용으로 인구학적 특성에 따라 분류 하였다. 설문은 컴퓨터 사용 시간, 시력 저하의 요인들, 그리고 컴퓨터 사용 목적에 관한 질문들을 하였다. 학생들의 연간 시력 변화와 시력 변화의 원인에 대해서 교차 분석한 결과, 설문에 참가한 165명의 학생 중 63.6%가 한 해 동안 시력이 나빠졌다. 컴퓨터 사용시간과 시력 저하 상관관계를 나타내기 위해 회귀 분석한 결과 일일과 주간 컴퓨터 사용에서는 시력저하를 나타냈고, 년 컴퓨터 사용에서는 시력저하를 나타내지 않았다. 또한 독립 표본 T검정으로 안경 착용과 미착용자의 컴퓨터 사용 시간과 시력 저하를 분석한 결과 일일과 주간 컴퓨터 사용에서는 시력저하를 나타냈고, 년 컴퓨터 사용에서는 시력저하를 나타내지 않았다. 그런데 안경 미 착용자가 안경 착용자에 비해서 시력 저하를 더 나타냈다. 본 논문에서는 24.5%의 학생들이 컴퓨터 사용으로 시력저하를 나타냈다. 컴퓨터 사용 용도의 빈도분석 결과에서는 컴퓨터 게임이 36.4%로 가장 많았고, 그 다음으로 학습목적이 32.1% 나타났다. 본 논문에서는 컴퓨터 사용 시간과 시력 저하의 요인 분석을 통해 컴퓨터 사용 시간이 시력저하에 상관관계가 있음을 나타낸다. 따라서 학생들의 컴퓨터 사용에 대한 학부모님들의 관심이 필요하다.

• 한국생활과학회지
• /
• 제21권2호
• /
• pp.299-314
• /
• 2012

The purpose of this study was to explore effects of pattern alteration using a virtual clothing simulation approach in combination with 3D analysis software. Three raglan sleeves of different patterns were worn by an avatar using virtual clothing simulation with silk and cotton as the test fabrics. It was observed that the silhouette and hemline shape were affected differently based on raglan sleeve pattern and fabric type. By examining clothing pressure distribution, the cotton fabric designs and pattern shapes provided for a variety of influences on armhole and bust regions as well as the back sleeve area. For representative locations, cross section circumstance, cross section area, and volume were measured by using 3D analysis and the resulting correlation between the 2D and 3D data were investigated. Among different fabrics, there was little difference between the 2D and 3D clothing surface area. However, when using 3D analysis, clothing volume was significantly affected by different fabrics and pattern types. By simultaneously adopting the virtual simulator and 3D analysis, quantitative assessment of virtual clothing simulation was successfully conducted. In light of the results of this study, the resulting methodology is expected to be used as a comprehensive evaluation tool for virtual clothing simulation wear testing.

• 복식문화연구
• /
• 제24권5호
• /
• pp.531-543
• /
• 2016

The purpose of this study is to classify fashion lifestyle types for color planning and to propose color planning of spring & summer by fashion lifestyle by analyzing preferred colors by fashion lifestyle type. The survey was conducted on women between the ages of 30 and 59 using a separately prepared questionnaire and color sample table and also through one-on-one interviews. The results of this study are as follows. First, the participants' fashion lifestyles were divided into three categories: information individuality type, display type, and practicality type. Second, regarding basic colors: the basic color consistently used for a long time, it was found that there were significant differences in preferred hue and tone according to the types of fashion lifestyles. Specifically, the most preferred hue of all the fashion lifestyle types was achromatic color N and the most preferred tone was V. Third, regarding color trends: the trendy color occupying a market transiently, there were significant differences in preferred hue and preferred tone according to the types of fashion lifestyle. The most preferred hue of all the fashion lifestyle types was B. The most preferred tone of the information individuality type and the display type was V, and that of the practicality type was B. The study found that, in color planning, fashion lifestyles can function as an effective tool to subdivide consumers. Based on the empirical results of this study, I propose that color planning should be based on the type of fashion lifestyle.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.130-137
• /
• 1997

The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1998년도 춘계학술대회 및 발표대회 강연 및 발표논문 초록집
• /
• pp.6-6
• /
• 1998

In 1957, the first magnetic disk drive compatible with a movable head was introduced as an external file memory device for computer system. Since then, magnetic disks have been improved by increasing the recording density, which has brought about the development of a high performance thin film magnetic head. The thin film magnetic head has a magnetic circuit on a ceramic substrate using IC technology. The physical property of the substrate material is very important because it influences the tribology of head/disk interface and also manufacturing process of the head. $Al_{2}O_{3}$-TiC ceramics, so called ALTIC, is known to be one of the best substrate materials which satisfies this property requirement. Even though the head is not in direct contact with the disk, frequent instantaneous contacts are unavoidable due to its high rotating speed and the close gap between them. This may cause damage in the magnetic recording media and, thus, it is very important that the magnetic head has a good wear resistance. $Al_{2}O_{3}$-TiC ceramics has an excellent tribological property in head/disk interface. Manufacturing process of thin film head is similar to that of IC, which requires extremely smooth and flat surface of the substrate. The substrate must be readily sliced into the heads without chipping. $Al_{2}O_{3}$-TiC ceramics has excellent machineability and mechanical properties. $Al_{2}O_{3}$-TiC ceramics was first developed at Nippon Tungsten Co. as cutting tool materials in 1968, which was further developed to be used as the substrate materials for thin film head in collaboration with Sumitomo Special Metals Co., Ltd. in 1981. Today, we supply more than 60% of the substrates for thin film head market in the world. In this paper, we would like to present the sintering process of $Al_{2}O_{3}$-TiC ceramics and its property in detail.

• 한국지리정보학회지
• /
• 제9권2호
• /
• pp.183-193
• /
• 2006

본 연구는 부산에 거주하는 대학생들의 의류 구매(정장 및 캐주얼) 상권에 따른 공간행동이 주중과 주말의 구매 시기에 따른 것을 살펴보는데 그 목적이 있다. 질문지를 통해서 분석했으며, SPSS 통계 분석 중에서 맥네마 분석기법을 이용하여 대학생들의 의류 구매 시기를 주중과 주말로 분류하여 분석하였다. 분석결과 통계적으로 유의한 차이가 있는 것으로 나타나 어떻게 차이가 있는지 GIS를 통해 시각적으로 살펴보았다 이와 같이 시각적으로 이해하기 위해 GIS의 프로그램 내에서 스파이더 분석방법을 이용하여 대학생들의 정장과 캐주얼의 구매 시 상권방문에 따른 공간행동을 나타내었다. 본 분석을 통해서 의류업체는 소비자들의 의류 구매 특성을 개별적으로 파악하여 전체적으로 혹은 부분적으로 분석함으로써 상권 및 점포 전략을 세우는데 유용하게 이용할 수 있을 것이다.

• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.129-136
• /
• 1994

Si3N4 with 6w/o Y2O3 and 1.5w/o Al2O3 has been gas pressure sintered and its densification behavior and the effect of the sintering variables on the microstructure and mechanical properties were investigated. Densification rate was higher at temperature below 1775$^{\circ}C$ and between 187$0^{\circ}C$ and 195$0^{\circ}C$ than between 1775$^{\circ}C$ and 187$0^{\circ}C$. The faster densification at temperature between 187$0^{\circ}C$ and 195$0^{\circ}C$ was thought to be due to the increased amount of liquid phase resulting from the increased amount of Si3N4 dissolving in the liquid. $\beta$-Si3N4 and Y-disilicate at temperatures below 1775$^{\circ}C$, and only $\beta$-Si3N4 at 187$0^{\circ}C$ and above were detected by XRD analysis. Three different two-step schedules were employed to obtain sintered body with above 99% theoretical density and to investigate the effect of the sintering variables on the density, the microstructure and the mechanical properties of the sintered body. The sintered density did not change with the heating rate, and the microstructure became coarser as the temperature increased. The strength decreased with the width of $\beta$-Si3N4 grain, while the fracture toughness increased with the square root of it. A ceramic cutting tool made of the sintered body showed an uniform flank wear after the cutting test.

• 한국의상디자인학회지
• /
• 제7권1호
• /
• pp.41-54
• /
• 2005

The purposes of this study on various headgear at the age of the Persian Achaemenes are to analyze one cultural aspect of the Achaemenes Kingdom that made a great empire about 5th century B.C. and to understand the ancient Persian culture. It is widely recognized that the Persian region was an important place for cultural exchange between the East and the West through the Silk Road and its culture affected China and Korea. Therefore, it is necessary to study ancient culture in this region for further understanding of the Korean culture. However, research activities have not been satisfactorily conducted. This study is an attempt to elevate the interest in this subject. In this study, European archeological materials covering Naqsh-e-Rostam (a tomb of Darius), Apadana stairs, Darius palace in Persepolis, and Bistun(Behistun), the relief at the age of the Achaemenes Kingdom, were collected and analyzed. From this study, the following results were obtained. For crowns at the age of the Achaemenes Kingdom, two kinds of shapes are observed; Mitra, a kind of headband, in the early period and a cylindrical one in the later period. Mitra was also worn by chiefs trusted by the king. Further, slightly different styles of cylindrical crowns were observed, which is considered that kings might wear unique crowns to symbolize new period of their reign. In addition to crowns, various styles of headgear for subjects are observed, meaning that tribes conquered by the Persian empire used their unique headgear. Further, such different styles of headgear might be a tool for social classification. Representative styles of headgear include the semicircular one worn by the Median nobles, Strophion originated from the Elam's headband, and nomadic tribes' Baschlik observed in the Median relics.

• 한국정밀공학회지
• /
• 제28권6호
• /
• pp.709-715
• /
• 2011

Chattering in cutting operations are usually a cumbersome part of the manufacturing process in mechanical. Particular, machining performance such as that of the boring process is limited by cutting condition at the movable components. Among various sources of chatter vibration, detrimental point in cutting condition is found a mechanical condition on overhang. It limits cutting speed, depth, surface roughness and tool wear failure as result because the all properties are varying with the metal removal process. In this case, we have to observe the resonance frequencies of a boring bar for continuous cutting. In the established research, boring bar vibration of cutting system has been measured with the aid of accelerometer. However, the inherent parameters of internal turning operations are severely limit for the real time monitoring on accelerometers. At this point, this paper is proposed other method for real time monitoring during continuous cutting with optical fiber at the inside of boring bar. This method has been used a plastic fiber in the special jig on boring bar by based on experimental modal analysis. In this study, improvement of monitoring system on continuous internal cutting was attempted using optical fiber sensor of inside type because usually chattering is investigated experimentally measuring the variation in chip thickness. It is demonstrated that the optical fiber sensor is possibility to measure of chattering with real time in boring process.

• 비파괴검사학회지
• /
• 제26권1호
• /
• pp.7-11
• /
• 2006

기계부품의 세라믹 코팅 층은 사용 중 그 표면특성이 변하므로 잔류수명 예측과 신뢰성 확보를 위해 비파괴적으로 세라믹 코팅 층의 특성을 평가하는 것은 매우 중요하다. 이를 위해 본 인구는 AISI 1045 강과 오스테나이트 스테인리스 304 강 모재위에 매우 얇은 TiN 세라믹 층을 코팅한 시편에 내하여 누설 레일리(Rayleigh) 표면파를 이용한 TiN 코팅부재의 특성평가를 시도하였다. 후방복사 측정기법으로 코팅 층 내의 표면파의 전파특성이 평가되었고 표면 거칠기, 코팅 층 두께, 마모조긴 둥이 다양한 시편들에 대해 후방복사 프로파일이 측정되었다. 후방복사 프로파일의 정점각과 크기는 시편의 조건들에 따라 민감하게 변하였고, 정점각의 증가는 코팅 층 접합 강도의 저하로 설명되었다. 결과들은 후방복사 기법을 이용한 표면파의 분산성 평가가 코팅 층의 특성 평가에 매우 유용함을 보여주었다.