• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.129-135
• /
• 2021

Injection molding is a manufacturing method of melting the polymer resin and injecting it into a mold to molding it into the desired form. Due to the short molding time and outstanding formability, complex products can be shaped with high precision and it is the most widely used polymer molding method. However, there may be areas that are not filled depending on the location of the injection gate where polymer resin is injected. Formability is determined by deformation and surface precision due to the impact of residual stress after molding. Hence, choosing the location of the injection gate is very important and molding analysis of injection molding is essential to reduce the cost of the mold. This study evaluated the injection formability based on the location of the injection gate of the vertical machining center ATC tool port using injection molding analysis and the results were compared and analyzed. Injection molding analysis was conducted on filling, packing, and deformation according to the location of the gate of the ATC tool port. From each injection gate location, filling time, pressure, and maximum deformation were compared. At gate 2, conditions of molding time and the location of the gate were far superior in production and quality. Gate 2 produced the smallest deformation of 0.779mm with the best quality.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 추계학술대회
• /
• pp.50-51
• /
• 2009

선박은 충돌로 인한 침수, 화채 등 여러가지 이유로 긴급피난을 감행해야하는 경우가 많다. 특히, 선박의 경우 그 구조의 특성상 줍고 미로같은 복잡한 형태로 구성되어 신속한 탈출이 어렵다. 화재에 의한 인명손상의 경우 연기에 의한 질식사가 부분을 차지하므로 신속한 탈출은 생존율 향상에 중요한 역할을 한다. 이 연구에서는 기존과 제안된 선박구조에 대한 화재확산과 승무원 피난시간을 검토한다.

• 수산해양교육연구
• /
• 제26권2호
• /
• pp.322-334
• /
• 2014

In order to enhance consignment sale businesses of fisheries cooperatives, it is needed to seek measures to accept needs of customers who use the fisheries cooperatives consignment sale market by examining recognition of fishermen. Thus, the purpose of this study is to develop measurement items and scales of the consignment sale factors for fishermen of the fisheries cooperatives port consignment sale market, and to determine the difference between consignment sale factors importance and satisfaction of fishermen. For this, it conducted a survey targeting fishermen who use the fishery product port market consignment sale of the oyster hanging fisheries cooperatives. It used the Importance-Satisfaction Analysis (ISA) for an analysis tool.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.242-247
• /
• 2003

An experimental study presents characteristics of combustion in a combustion chamber by port deactivation valve for economy and emissions standards. In order to use combustion properties data it is necessary to build some data base, which use cylinder pressure sensor, etc. Port deactivation valve has been developed to satisfy requirement of achieving sufficient swirl generation to improve the combustion. A feasibility and necessity of combustion pressure based cylinder spark timing control has been examined. So, this was obtained the Coefficient of Variation(COV) and the mass-burned(MFB). The characteristics of pressure ratio fraction is similar to that of mass-burned fraction. Using the results of the test, the effects of the combustion chamber can be improved combustion stability by port deactivation.

• 경영과학
• /
• 제25권3호
• /
• pp.73-85
• /
• 2008

First we provide an overview of how virtual enterprise works, including the lifecycle of a virtual enterprise, expected benefits from a virtual enterprise, and various types of collaborative networks. Next we focus on a problem encountered in the port logistics industry and suggest that implementation of a virtual enterprise can be a good solution to the problem. Then we suggest a prototype of the virtual enterprise in the port logistics industry and a freight transportation process as a business process in the prototype. And then we introduce major functions of the business process management system (BPMS) which, in general, can be regarded as a tool to create the virtual enterprise. Finally by adopting a specific BPMS, we illustrate how to design and implement the freight transportation process in the prototype.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.125-131
• /
• 2005

The purpose of the present study is to examine the flow characteristics of ER fluids between 2 port and 3 port rectangular tube brass electrodes. ER fluid is made silicon oil mixed with $2-3wt\%$ starch having hydrous particles. Flow visualization of the ER fluids were obtained by CCD camera measuring those of the clusters using an image processing technique. This research found the flow $rate(Q_L)$ with 0 kV /mm, 0.5kV/mm and 1.0kV/mm for $Q_L\;=\;0,\;0$ and $5.73cm^3/s$. When the strength of the electric field increased, the cluster of ER fluids are clearly strong along the rectangular tube and the flow rate(Q) decreased.

• 한국조경학회지
• /
• 제21권2호
• /
• pp.17-33
• /
• 1993

This paper is the on-site case study of the shaping of townscape of port towns in Korea. Inchon has been experienced the rapid urbanization after the opening of a port. Inchon is selected because of the relatively rapid process, the apparent event and influence, and the enough referneces of data about the landscape formation and transformation. As the value of historical landscape, it is very significant to study Inchon and the causes of change in townscape depend on the external element-the opening of a port, Japan colonial policy, economic progress, nationwide development. The main purpose of this study is scrutinized the process, the cause and effect, and the contents and the form of shaping of townscape. The result of the interpretation of landscape is never perfect but only a starting point. Finally this study will be applied to the pragmatic task as a basic tool which construct the desirable image of the city.

• Advances in aircraft and spacecraft science
• /
• 제6권4호
• /
• pp.333-348
• /
• 2019

Low fuel regression rate is the main drawback of hybrid rocket which should be overcome. One of the improvement techniques to this problem is usage of a solid fuel grain with a complicated geometry port, which has been promoted owing to the recent development of additive manufacturing technologies. In the design of a hybrid rocket fuel grain with a complicated geometry port, the understanding of fuel regression behavior is very important. Numerical investigations of fuel regression behavior requires a capturing method of solid fuel surface, i.e. gas-solid interface. In this study, level set method is employed as such a method and the preliminary numerical tool for capturing a hybrid rocket solid fuel surface is developed. At first, to test the adequacy of the numerical modeling, the simulation results for circular port are compared to the experimental results in open literature. The regression rates and oxidizer to fuel ratios show good agreements between the simulations and the experiments, after passing enough time. However, during the early period of combustion, there are the discrepancies between the simulations and the experiments, owing to transient phenomena. Second, the simulations of complicated geometry ports are demonstrated. In this preliminary step, a star shape is employed as complicated geometry of port. The slot number effect in star port is investigated. The regression rate decreases with increasing the slot number, except for the star port with many slots (8 slots) in the latter half of combustion. The oxidizer to fuel ratio increases with increasing the slot number.

• 한국항만학회지
• /
• 제14권1호
• /
• pp.97-105
• /
• 2000

This paper presents an automatic mesh generation considering water depth, which is based on the depth interpolation. The key feature of this method is that the position of a mesh on any depth in the shallow water area can be generated. The Examples are carried out, and the results are shown to be good. This method is shown to be a useful and powerful tool for the flow calculation for the seabed topography.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.109-112
• /
• 2000

본 논문은 마이크로머시닝 기술을 이용한 밀리미터파 대역의 공진기 설계를 제시한다. 밀리미터파 대역에서 3D 설계 tool인. HP HFSS ver. 5.5를 사용하였다. One-port cavity 공진기는 공진 주파수가 39.34 GHz., 반사 손실은 14.5 dB, 그리고, loaded Q (Q$_1$)는 150 을 보인다. Two-port cavity 공진기의 경우, 공진 주파수는 39GHz이고, 삽입 손실과 반사 손실은 각각 4.6 dB 와 19.8 dB. 그리고 loaded Q와 unloaded Q는 각각 44.3과 107로 측정되었다.