• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.4
• /
• pp.8-15
• /
• 2002

This paper proposes a case study to treat planning and scheduling in factory of supply chain. In fact, the planning and the scheduling of a factory are not easily solved because of constraints of facility resources, material requirements, allowed planning times, and so on. However many packages are developed by vendors in Advanced Planning and Scheduling(APS) aspects to solve these problems. Therefore, in this paper, we analyze problems of an electronic company and apply the tool, Factory Planner(FP), to solve problems. The FP, which was developed by if technologies, is very popular planning and scheduling tool in the world. Also, the tool is successfully applied to many fields.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.265-272
• /
• 2015

The competition between companies for prior occupation of the market is becoming fierce. In this highly competitive situation, it is important for companies to differentiate themselves if they are going to have a chance at success. And the competition to create the best solution method possible is higher than ever. Increased competition is forcing companies to lower costs and improve efficiency. A supply chain management(SCM) has become one of the most important solution methods of competitive advantage. This study has developed a simulator for the supply chain network problem. The simulator is designed to simulate the conditions of an actual supply chain network considering uncertainties. The simulator developed using commercial simulation tool ARENA and the results of computational experiments for a simple example were given and discussed to validate the developed simulator. Further research is needed, but using the simulator could become a useful tool for decision making in the supply chain network area.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.34-42
• /
• 2004

A new polishing technique for three dimensional micro/meso-scale parts is suggested using a micro quill and a magnetic chain structure. The principle of this method is to polish the target surface with the collected magnetic brushes at a micro tool by the non-uniform magnetic field generated around the tool. In a typical magnetic abrasive finishing process magnetic particles and abrasive particles are unbonded each other. But, to finish the three dimensional small parts bonded magnetic abrasive have to be used. Bonded magnetic abrasives are made from direct bonding, and their polishing characteristics are also examined. Alumina, silicon carbide and diamond micro powders are used as abrasives. Base metal matrix is carbonyl iron powder. It is found that bonded magnetic abrasives are superior to unbonded one by experiment. finally, the polished surface roughness is evaluated by atomic force microscope.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.4
• /
• pp.909-916
• /
• 2021

The purpose of the research to analyze SMEs' technological innovation performance in the Special Region of Yogyakarta based on green supply chains. This study's technology innovation performance is influenced by environmental management practices, green supply chain integration, and supply chain knowledge-sharing. This research is important because many SMEs are underdeveloped in terms of technology innovation performance. Technology innovation performance shows that innovation has a multi-dimensional ecological performance in organizations. Therefore, SMEs' sustainable supply chain could be achieved by managing operations, support, and information by focusing on environmental and social issues to maximize the entire chain. This study used primary data. The number of respondents in this study was 200 SMEs that have implemented green supply chain management practices. The data collection method used was a questionnaire. The data analysis technique tool used is a two-step approach to SEM-AMOS. The results of this study indicate that SMEs are willing to implement a green supply chain to increase their performance. The technological innovation performance model of this study is acceptable. The findings of this research suggest that companies must be encouraged to maintain and increase the implementation of green supply chain integration and better supply chain knowledge-sharing with improved technological innovation performance enhancements.

• Korean Journal of Pharmacognosy
• /
• v.10 no.2
• /
• pp.55-59
• /
• 1979

Mass spectra of the dammarane triterpenes having open side chain and $C_{20}-C_{25}-epoxy$ side chain were measured. Principal fragment ions were assigned and plausible mechanisms for the formation of the fragment ions were proposed. In general, the triter-penoids of $C_{20}-C_{25}-epoxy$ side chain. produce $h_{1}-species$ fragment ions by the deletion of side chain at $C_{20}-C_{22}$ bond and open side chain triterpenoids produce $h_{2}$ species fragmentions whose mass numbers are higher by two mass unit than those of $h_{1}$ species. The mass number of h species fragment ions will serve as the diagnostic tool for the elucidation of side chain structure of tetracyclic triterpenoids.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.425-434
• /
• 2001

In this paper we introduce a general framework for the modeling, analysis and costing of logistic networks including supply chains (SCs). The employed modeling notation, the so-called Process Chain paradigm, is specifically developed for the application field of logistic networks which includes SCs. We view SCs as discrete event dynamic systems (DEDS) and apply corresponding simulative techniques in order to derive performance measures of the Process Chain model under investigation. For this purpose Process Chain models are automatically transformed into the input language of the simulation tool HIT. Subsequently, a cost accounting model using the performance measures is applied to obtain costs which are actually subject of interest. The usefulness and applicability of the approach is illustrated by a typical supply chain example. We investigate the impact of an additional SC channel between a manufacturer and web-consumers on the overall supply chain costs.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.1-10
• /
• 2011

As requirements of embedded system get complicated, the tool for analyzing the reliability of embedded software is being needed. A probabilistic modeling is used as the way of analyzing the reliability of a software and to apply it to embedded software controlling multiple devices. So, it is necessary to specialize that to embedded software. Also, existing reliability analyzers should measure the transition probability of each condition in different ways and doesn't consider reusing the model once used. In this paper, we suggest a reliability analyzer for embedded software using embedded software Markov chin model and a unit testing tool. Embedded software Markov chain model is model specializing Markov chain model which is used for analyzing reliability to an embedded software. And a unit testing tool has host-target structure which is appropriate to development environment of embedded software. This tool can analyze the reliability more easily than existing tool by automatically measuring the transition probability between units for analyzing reliability from the result of unit testing. It can also directly apply the test result updated by unit testing tool by representing software model as a XML oriented document and has the advantage that many developers can access easily using the web oriented interface and SVN store. In this paper, we show reliability analyzing of a example by so doing show usefulness of reliability analyzer.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.4
• /
• pp.300-304
• /
• 2011

This paper proposes an approach to generate tool-path for laser pattern machining. Considering the mechanical structure of a laser pattern machine, it is quite similar to that of a 2D milling machine. Based on the observation, one may try to utilize the tool-path generation methodologies of 2D milling for the laser pattern machining. However, it is not possible to generate tool-path without considering the technological requirements of laser pattern machining which are different from those of 2D milling. In this paper, we identify the technological requirement of laser pattern machining, and propose a proper tool-path generation methodology to satisfy the technological requirements. For the efficient generation of tool-path, this paper proposes a tool-path element computation method, which is based on the concept of a monotone chain.

• Journal of Distribution Science
• /
• v.21 no.5
• /
• pp.83-91
• /
• 2023

Purpose: Increasing their motivation and job satisfaction, employees in the distribution channel may be better able to interact with consumers and provide a more satisfying experience. Thus, increasing employee engagement in the supply chain necessitates a complex strategy considering the distinctive features of wholesale and retail markets. This study investigates how to boost employees' motivation in the supply chain based on the difference between wholesale and retail market. Research design, data, and methodology: The prior study analysis is a useful tool to take a look at relevant previous works via a significant screening and selecting strategy. The Key words based on the topic of the research have used, such as 'Employee Motivation', 'Supply Chain', 'Wholesale' and 'Retail' worker. Results: The findings of this research strongly indicates that motivating employees is essential for the efficient operation of supply chain activities as they continue to expand and become more complicated. The supply chain's two main segments are the wholesale and retail markets, each with distinct characteristics. Conclusions: This research focused exclusively on the factors that motivate supply chain workers, ignoring job satisfaction, corporate culture, and managerial style, which may affect employee motivation. These factors also have the potential to impact employee motivation and should be considered in subsequent research.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.187-192
• /
• 1993

Thermal deformation causes large amount of machine tool errors. In order to compensate for thermal and geometric errors of the machine tool an off-line geometric adaptive control (GAC) scheme was developed. THe GAC method was realized by using a measuring plate made of precision spheres. Error vectors and volumetric errors were measured by the measuring plate. Error compensation models were obtained from error vectors and a kinematic chain of machine tools. Reliability of the GAC system of thermal and geometric errors were confrimed by large amount of experiments.