Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지

Scan Tool-Path Generation for Laser Pattern Machining

레이저 패턴 가공용 스캔 공구경로 생성

  • 이창호 (아주대학교 산업공학과) ;
  • 박상철 (아주대학교 산업정보시스템공학부)
  • Received : 2011.01.28
  • Accepted : 2011.06.21
  • Published : 2011.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes an approach to generate tool-path for laser pattern machining. Considering the mechanical structure of a laser pattern machine, it is quite similar to that of a 2D milling machine. Based on the observation, one may try to utilize the tool-path generation methodologies of 2D milling for the laser pattern machining. However, it is not possible to generate tool-path without considering the technological requirements of laser pattern machining which are different from those of 2D milling. In this paper, we identify the technological requirement of laser pattern machining, and propose a proper tool-path generation methodology to satisfy the technological requirements. For the efficient generation of tool-path, this paper proposes a tool-path element computation method, which is based on the concept of a monotone chain.

Keywords

References

  1. Choi, B. K. and Jerard, R. B., Sculptured Surface Machining, Kluwer, 1998.
  2. Preparata, F. P. and Shamos, M. I., Computational Geometry-An Introduction, Springer Verlag, 1985.
  3. Bentley, J. L. and Ottmann, T. A., "Algorithms for Reporting and Counting Geometric Intersections," IEEE Transactions on Computers, Vol. 28, pp. 643-647, 1979.
  4. 박형준, 안동규, "2차원 자유형상의 레이저 절단을 위한 CNC 공구경로 생성," 한국CAD/CAM학회 논문집, 제12권, 제3호, pp. 153-162, 2007.
  5. 김휘준, 김형중, 최원용, 김동수, 안성훈, 전차수, "3차원 레이저 가공기를 위한 전용 CAM 시스템 개발," 2007 한국 CAD/CAM 학회 학술발표회 논문집, 휘닉스파크, 한국, pp. 271-275, 2007.
  6. Dumont, T., Lippert, T., Wokaun, A. and Leyvraz, P., "Laser Writing of 2D Data Metrices in Glass," Thin Solid Films, Vol. 453, pp. 42-45, 2004.
  7. Ng, T. W. and Yeo, S. C., "Aesthetic Laser Marking Assessment," Optics & Laser Technology, Vol. 32, pp. 187-191, 2000. https://doi.org/10.1016/S0030-3992(00)00040-2
  8. Diaci, J., Bracun, D., Gorkic, A. and Mozina, J., "Rapid and Flexible Laser Marking and Engraving of Tilted and Curved Surfaces," Optics and Laser in Engineering, Vol. 49, pp. 195-199, 2011. https://doi.org/10.1016/j.optlaseng.2010.09.003
  9. Sedgewick, R., "Implementing Quicksort Programs," Communications of the ACM, Vol. 21, No. 10, pp. 847-857, 1978. https://doi.org/10.1145/359619.359631