• 한국음향학회지
• /
• 제37권1호
• /
• pp.39-45
• /
• 2018

압축센싱을 적용하면 전체 신호의 차원 대비 실제 사용하는 신호의 차원이 작은 희소신호의 경우, 적은 수의 관측치를 통하여 빠른 시간 내에 복원이 가능하다. 수중 표적의 기어박스 및 보조 장치 등으로부터 방사되는 신호의 토널 주파수 성분들은 처리하고자 하는 주파수 대역에서 상대적으로 주파수 성분이 적다. 따라서 토널 신호는 주파수 영역 전체 대비 희소신호로 모델링 될 수 있으므로 희소 신호 복원 알고리듬인 S-OMP(Simultaneous-Orthogonal Matching Pursuit)를 이용하여 복원할 수 있다. 본 논문에서는 압축센싱 기법을 이용하여 수중 표적의 방사 소음 신호의 토널 주파수를 검출하는 기법을 제안하고 모의 실험을 통해 성능을 확인한다. 모의실험에서 기존의 FFT(Fast Fourier Transform) 임계치 기법을 이용한 방법에 비해 낮은 SNR(Signal to Noise Ratio)에서도 정확한 토널 성분을 추정 할 수 있음을 확인하였다.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.912-919
• /
• 2022

The study is an image-based assessment that uses image processing techniques to determine the condition of concrete with surface cracks. The preparations of the dataset include resizing and image filtering to ensure statistical homogeneity and noise reduction. The image dataset is then segmented, making it more suited for extracting important features and easier to evaluate. The image is transformed into grayscale which removes the hue and saturation but retains the luminance. To create a clean edge map, the edge detection process is utilized to extract the major edge features of the image. The Otsu method is used to minimize intraclass variation between black and white pixels. Additionally, the median filter was employed to reduce noise while keeping the borders of the image. Image processing techniques are used to enhance the significant features of the concrete image, especially the defects. In this study, the tonal zones of the histogram and its properties are used to analyze the condition of the concrete. By examining the histogram, the viewer will be able to determine the information on the image through the number of pixels associated and each tonal characteristic on a graph. The features of the five tonal zones of the histogram which implies the qualities of the concrete image may be evaluated based on the quality of the contrast, brightness, highlights, shadow spikes, or the condition of the shadow region that corresponds to the foreground.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.348-353
• /
• 2012

This paper presents the HRTF based experimental approach to figure out why the human auditory perception on the interior noise source including the directional tonal components does not well match with the dominant features extracted from recorded acoustic signals in terms of psycho-acoustics. Since the general objective evaluation models for tonalness among various sound attributes are a function of width, frequency, excessive level of tonal components respectively, the directional tonal components cannot be properly evaluated without considering the effects of head-related transfer function on the binaural auditory perception. Thus, the directivity of source is additionally considered to prevent the erroneous conclusions from the same sound source in the process of source identification. The signal synthesis technique is used to solve a little difficulty in measuring all of desired acoustic signals for jury evaluation. The sound attributes of synthetic acoustics signals are analyzed to roughly predict the results of jury evaluation in advance by using sound quality factors such as loudness, sharpness, roughness, fluctuation strength and tonality. The jury evaluation is carefully conducted based on the recommended guideline suggested by N. Ottoet al. Each sound is respectively evaluated by selecting a value between -2 and 2 in intervals of 0.2 point. Through above procedure, based on the results of jury evaluation, it is confirmed that serious problems can be caused in the process of analyzing the dominant sound attributes in terms of psycho-acoustics according to the type of a microphone and a playback system.

• 한국소음진동공학회논문집
• /
• 제13권6호
• /
• pp.460-466
• /
• 2003

The aeroacoustic characteristics and noise reduction method of a centrifugal fan for a bagless vacuum cleaner were studied. The major noise source of vacuum cleaner is the centrifugal fan. The impeller of the fan rotates over 30000 rpm and generates very high-level piercing noise. It was found that the dominant noise source of the fan is generated from the aerodynamic interaction between the highly rotating impeller and stationary diffuser. In order to reduce the high tonal sound generated from the aerodynamic interaction between the impeller and diffuser, tapered impeller was carefully designed and tested. The trailing edge of the tapered impeller was inclined and this reduces the flow interactions between the rotating impeller and the stationary diffuser because of some phase shift. The static efficiency of the new impeller is slightly lower than the conventional one. The overall SPL is reduced about 3.6 dBA. The SPL of blade passing frequency(BPF) is reduced about 6 dBA and the $2^{nd}$ BPF is reduced about 20 dBA. The vacuum cleaner with the tapered impeller has lower noise level than that of the previous impeller and the strong tonal sound was dramatically reduced.

• 한국음향학회지
• /
• 제31권6호
• /
• pp.384-390
• /
• 2012

수동 소나는 데몬 처리를 통해 수중 표적의 방사 소음으로부터 프로펠러 정보 추출한다. 그러나 기존 데몬 처리 기법은 프로펠러 신호 뿐 아니라 토널 신호 성분도 추출하므로 토널 신호의 간섭으로 인한 성능 저하가 있다. 다시 말해 데몬 처리 주파수 영역 내에 토널 신호가 존재하면 기존 데몬 처리 기법은 토널 신호의 간섭에 의한 신호 성분을 추가적으로 추출한다. 따라서 본 논문에서는 토널 신호 간섭을 제거할 수 있는 데몬 처리 기법을 제안한다. 제안된 기법은 데몬 처리를 위한 방사 소음 신호의 복조 과정 이전에 토널 신호를 추출 및 제거한다. 그러므로 제안된 데몬 처리 기법은 토널 신호의 간섭에 강인하다. 그리고 시뮬레이션을 통해서 제안된 기법이 기존의 데몬 처리 기법보다 성능이 우수함을 검증하였다.

• 한국유체기계학회 논문집
• /
• 제7권1호
• /
• pp.17-23
• /
• 2004

Aeroacoustic characteristics of sirocco fan used in Over-The-Range (OTR) has been analyzed in this paper. A microwave hood combination over the gas range is short for the OTR. The flow phenomena of the double-sided sirocco fan was analyzed numerically and experimentally by using commercial code and three dimensional PIV for flow visualization. Also, microphone array is used in order to understand acoustic characteristics of OTR. Two dimensional unsteady flow and acoustic simulation is tried to qualitatively estimate the effects of tonal noise and broadband noise on the overall sound pressure level. It is found that tonal sound is generated from the strong interaction between the impeller and cutoff while broadband sound is generated from the strong secondary flows along the scroll surface. To reduce the noise level, the V-shape cut-off was applied to improve the sound quality by reducing tonal noise. So the peak noise at BPF (Blade Passing Frequency) was almost reduced. The shape of flow-guide to suppress the secondary flow over the scroll surface was carefully checked. It is found that this affects flow pattern at the fan exit and reduces the broad band noise. Through this numerical and experimental study, the sound pressure level was lowered by 4dBA compared to that of the previous fan at the operating point.

• 한국소음진동공학회논문집
• /
• 제25권10호
• /
• pp.692-699
• /
• 2015

Buffeting noise through a rear window in an automobile is investigated by using lattice Boltzmann method. The generation mechanism of the buffeting noise can be understood as the resonance mechanism in a Helmholtz resonator, which is driven by the convecting vortex in a shear-layer flow over the neck of the resonator. Two methods to suppress the buffeting noise are proposed, and their effects are quantitatively assessed. Opening front window reduces the observed buffeting tonal noise by 25 dB and the overall SPL by 4 dB, and the installation of a Helmholtz resonator acting as a dynamic damper reduces the tonal component that by 35 dB and the overall SPL by 10 dB.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1869-1874
• /
• 2004

Acoustic pressure field around the cross-flow fan is predicted by a hydrodynamic-acoustic splitting method. Unsteady flow field is obtained by solving the incompressible Navier-Stokes equations using an unstructured finite-volume method on the triangular meshes, while the acoustic waves generated inside the cross-flow fan are predicted by solving the perturbed compressible equations(PCE) with a 6th-order compact finite difference method. Computational results show that the acoustic waves of BPF tone are generated by interactions of the blades wakes with the stabilizer, which then are reflected from the rear-guider and mainly propagate towards the fan inlet. Also, a directivity of BPF noise predicted by the PCE is noticeably different from that of the FW-H equations, in which a fan casing effect cannot be included.

• 한국음향학회지
• /
• 제22권5호
• /
• pp.367-374
• /
• 2003

본 논문에서는 토널 마스커 특성을 이용한 오디오 워터마킹 기법을 제안한다. 먼저 오디오 워터마킹 특성으로서의 토널 마스커 특성을 분석한다. 기존의 심리음향 연구들에 의하여 토널 마스커를 구성하는 주파수 신호들에 대해 비지각적인 변조가 가능하다. 그리고 여러 신호처리에 대해 처리 전, 후의 톤과 좌, 우 주파수 신호의 에너지 관계를 비교하면 매우 적은 변화를 보인다. 이러한 토널 마스커 특성을 이용한 워터마킹 기법을 제안한다. 제안하는 기법은 톤의 좌, 우 주파수의 에너지 차이를 변조하여 하나의 워터마크 비트를 내장하고, 원음 없이 내장시의 비밀키를 이용하여 변조된 토널 마스커를 찾은 후 내장된 워터마크 비트를 판단하는 기법이다. 제안한 기법은 잡음 삽입과 압축, 대역 통과 필터링, 샘플링 변환, 반향처리, 주파수 등화의 공격 후, 클래식과 팝에 대해 각각 평균 오류율 0.11%, 1.26%를 보였다. 그리고 주관적인 음질 평가를 통하여 평균 SDG (Subjective Diff-Grades) -0.31의 결과를 얻었다.

• 한국음향학회지
• /
• 제12권4호
• /
• pp.14-20
• /
• 1993

본 논문에서는 주변 소음을 감소시키고 표적원의 방사음으로부터 tonal 성분을 추출하기 위한 방법으로서 잡음 정규화 기법에 대하여 연구하였다. 지금까지 알려진 기법들을 정리하였으며, ATW, 최빈치 필터등의 새로운 기법을 도입, 적용하여 그 성능을 평가하였다. 그리고 tonal 성분을 검출하기 위한 임계값 결정을 위해 오경보확률과 검출확률을 시뮬레이션을 통해 구하였다.