• 전기학회논문지
• /
• 제60권1호
• /
• pp.193-200
• /
• 2011

This paper presents an optimal checkpoint strategy for fault-tolerance in real-time systems. In our environment, multiple real-time tasks with arbitrary periods are scheduled in the system by Rate Monotonic (RM) algorithm, and checkpoints are inserted at a constant interval in each task while the width of interval is different with respect to the task. We propose a method to determine the optimal checkpoint interval for each task so that the probability of completing all the tasks is maximized. Whenever a fault occurs to a checkpoint interval of a task, the execution time of the task would be prolonged by rollback and re-execution of checkpoints. Our scheme includes the schedulability test to examine whether a task can be completed with an extended execution time. A numerical experiment is conducted to demonstrate the applicability of the proposed scheme.

• 품질경영학회지
• /
• 제35권1호
• /
• pp.10-19
• /
• 2007

ANOVA is widely, used for measurement system analysis. It assumes that the measurement error is normally distributed, which nay not be seen in some industrial cases. In this study the estimates of the measurement system variability and PTR (precision-to-tolerance ratio) are obtained by using weighted standard deviation for the case where the measurement error is non-normally distributed. The Standard Bootstrap method is used foy estimating confidence intervals of measurement system variability and PTR. The point and confidence interval estimates for the cases with normally distributed measurement error are compared to those with non-normally distributed measurement errors through computer simulation.

• BMB Reports
• /
• 제30권1호
• /
• pp.21-25
• /
• 1997

The growth. freezing resistance and electrophoretic protein patterns of carrot callus cultures were investigated following treatment with NaCl for various' intervals at 20$^{\circ}C$. Following 7 day exposure to 250 mM NaCl. freezing tolerance increased, which was measured by 2.3.5-triphenyl tetrazolium chloride (TTC) assay and fresh weight was reduced compared to control cells. Changes of electrophoretic patterns of total and boiling stable proteins were investigated using one or two dimensional gel system. Several proteins with molecular weight of 43 and 21 kDa increased by NaCl treatment. The most prominent change was detected in 21 kDa protein. The steady state level of this protein increased in NaCl treated cells, but decreased in control cells. Twenty one kDa protein was detected only in the NaCl treated cell when boiling stable protein was analyzed. The isoelectric point of 21 kDa protein was identified as 5.7. The timing of increase of 21 kDa protein was correlated to freezing resistance which implied the role of this protein in the induction of freezing resistance of the cell.

• 한국작물학회지
• /
• 제40권1호
• /
• pp.69-76
• /
• 1995

포장상태에서의 케놀라의 저온반응성 유전자인 BN28 과 BNl15 의 발현정도와 그 유전자들의 내 동성에 대한 역할을 구명하기 위하여 6개 품종 （ WRG86, CDH3, Dusul Ceres, Accord, KWC-4113）을 파종기를 달리 하여 파종하고 파종후 15일 간격으로 Sample를 채취하여 RNA를 추출하고 northern blot analysis로써 두 유전자의 발현정도를 조사하였던바 그 결과를 요약하면 아래와 같다. 1. 두 유전자의 발현시 기는 내동성이 증가하는 시기보다 조금 앞서는 것으로 나타났으며 이는 식물체가 내동성을 얻기 위하여 이 유전자의 발현을 필요로 하거나 혹은 이 유전자 발현을 조절하는 요인중 온도 이외의 환경요인이 관여하는 것으로 나타났다 하지만 유전자 발현이 급격히 증가하는 시기가 세 파종시기 처리에 있어서 일치하는 점과 또한 내동성의 급격한 증가시기와 일치하는 점으로 미루어 보아 이 유전자 발현을 조절하는 가장 중요한 요인은 저온인 것으로 생각된다. 2. 발현양식에 있어서 두 유전자간의 차이가 관찰 되었는데 이는 두 유전자가 각각 다른 조절기작을 통하여 발현이 통제되는것으로 생각되며 이러한 포장에서의 발현양식은 실험실에서의 그것과 일치하는 것으로 나타났다. 3. 유전자가 발현되어 증가되는 시기는 식물체의 내동성이 증가되는 시기와 일치되었다. 하지만 특정한 시점에 있어서 각 품종간의 내동성의 정도와 유전자 발현정도는 일치하지 아니하였다.

• Advances in Traditional Medicine
• /
• 제10권2호
• /
• pp.90-102
• /
• 2010

Effect of ethanol (ASE) and water (ASW) extracts of Argyreia speciosa on blood glucose and lipid profile was investigated in normoglycemic and Streptozotocin (STZ)-induced diabetic animals. In oral glucose and sucrose tolerance test, treatment with ASE and ASW (100 and 200 mg/kg) and Glidenclamide (10 mg/kg) significantly improved the glucose and sucrose tolerance in normal animals. In addition, respective treatment for fifteen-day resulted in significant percentage reduction in serum glucose (SG) ie., 30.39% (lower dose of ASE) and 33.21% (higher dose of ASW). In standardized STZ (50 mg/kg, iv)-induced diabetic rats, a single dose of ASE and ASW treatment exhibited reduction in SG levels at different time intervals compared to basal levels. Administration of both the doses of ASE and ASW for fifteen-day days exhibited greater percentage reduction in glycemia (24.6%, 24.7%, 23.9% and 21.9% respectively) and also ameliorated restored to near normal value of all tested lipid parameters. Further, treatment also exhibited significantly improved glucose tolerance over the period of 120 min compared to diabetic control group. Eventhough treatment failed to increase serum insulin levels significantly but peripheral utilization of insulin was increased as evident by insulin tolerance test. Taken together, present study supports the traditional usage of title plant in the treatment of diabetes mellitus.

• Journal of Nutrition and Health
• /
• 제42권7호
• /
• pp.622-630
• /
• 2009

The purpose of this study was to establish an association between glycemic index (GI), glycemic load (GL), dietary carbohydrates and diabetes with the context of the current population dietary practice in Korea. The subjects of 3,389 adults (male 1,430, female 1,959) were divided into normal (serum fasting glucose < 100 mg/dL), impaired glucose tolerance (100 ${\leq}$ serum fasting glucose < 126 mg/dL), diabetes (serum fasting glucose > 126 mg/dL) by serum fasting glucose. Anthropometric and hematologic factors, and nutrient intakes, dietary glycemic index (DGI), dietary glycemic load (DGL) were assessed. Multiple logistic regression model was used to determine the odds ratios (ORs) and 95% confidence intervals for relationship of DGI, DGL, carbohydrates intakes, and diabetes. DGI and DGL were not significantly correlated with impaired glucose tolerance and diabetes. However, the risk of impaired glucose tolerance and diabetes showed a tendency to increase as increase of DGI after multivariate adjustment (age, education, income, region area, diabetes family history, smoking, drinking, exercise, energy intake) in male. The risk of impaired glucose tolerance and diabetes showed a tendency to increase in the DGI 71.1-74.8 after multivariate adjustment in female. DGL was inversely related to impaired glucose tolerance and diabetes in male. In female, however, DGL was positively related to impaired glucose tolerance and diabetes. In particular, the risk of diabetes increased positively in level of DGL 260.5, and remained after multivariate adjustment (Q5 vs Q1：2.38, 0.87-6.48). When percent energy intakes from carbohydrates were more than 70%, the risk of impaired glucose tolerance and diabetes increased in both male and female. In particular, when percent energy intakes from carbohydrates were more than 69.9%, the risk of diabetes increased positively in male (Q4 vs Q1：2.34, 1.16-4.17). In conclusion, above 70% energy intakes from carbohydrates appeared to be a risk factor of diabetes. It seemed that the meal with high GI and GL value must be avoided it. And also, the macronutrients of the meal must be properly balanced. In particular, it may be said that it is a preventive way for treatment of the diabetes to avoid eating carbohydrates of much quantity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권12호
• /
• pp.6190-6213
• /
• 2019

For small-scale vector data, restrictions on watermark scheme capacity and robustness limit the use of copyright protection. A watermarking scheme based on robust geometric features and capacity maximization strategy that simultaneously improves capacity and robustness is presented in this paper. The distance ratio and angle of adjacent vertices are chosen as the watermark domain due to their resistance to vertex and geometric attacks. Regarding watermark embedding and extraction, a capacity-improved strategy based on quantization index modulation, which divides more intervals to carry sufficient watermark bits, is proposed. By considering the error tolerance of the vector map and the numerical accuracy, the optimization of the capacity-improved strategy is studied to maximize the embedded watermark bits for each vertex. The experimental results demonstrated that the map distortion caused by watermarks is small and much lower than the map tolerance. Additionally, the proposed scheme can embed a copyright image of 1024 bits into vector data of 150 vertices, which reaches capacity at approximately 14 bits/vertex, and shows prominent robustness against vertex and geometric attacks for small-scale vector data.

• 한국지능시스템학회논문지
• /
• 제21권1호
• /
• pp.120-127
• /
• 2011

체크포인트 기법은 실시간 시스템의 내고장성을 구현하는 대표적인 방법이다. 본 논문에서는 확률 최적화를 이용하여 체크 포인트 구간을 결정하는 기법을 제시한다. 본 논문에서 다루는 실시간 시스템은 멀티 태스크(multi-task)들로 구성되며 Poisson 분포를 가지는 과도 고장이 발생한다. 또 멀티 태스크들은 비선점형 Rate Monotonic 알고리듬으로 스케줄링된다. 이번 연구에서는 멀티 태스크들의 수행 성공 확률을 체크포인트 삽입 개수로 표현하는 최적화 문제를 설정하고 이 확률값을 최대로 만드는 체크포인트 개수와 구간 길이를 구한다. 제안된 확률 계산 과정은 체크포인트 재수행 횟수에 대한 비선점형 RM 알고리듬의 스케줄링 가능성을 판별하는 방법도 포함한다. 사례 연구를 통해서 제안된 기법의 적용가능성을 입증한다.

• 품질경영학회지
• /
• 제23권4호
• /
• pp.157-166
• /
• 1995

Process capability indices are used to determine whether a production process is capable of producing items within a specified tolerance. We could estimate the finite sample distributions of some process capability indices with bootstrap method. In this paper, we derive the asymptotic bootstrap distributions of some process capability indices ${\hat{C}}^*_p$, ${\hat{C}}^*_{pk}$ and ${\hat{C}}^*_{pm}$ under general proper conditions. These asymptotic distributiops would be used in constructing some bootstrap confidence intervals. Also, we examine some small sample properties related to these estimators by some simulations.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.740-745
• /
• 2005

Selective assembly is a method to find out appropriate matching pairs to be assembled to enhance the quality of the product. This study proposes an algorithm to select and match the components with two performance characteristics: at first, the number of matchable mates are calculated for each components. A matchable mate is defined to be the one of which the values of each performance characteristics lie in a rectangular mesh originated from the component under consideration. And the highest priority is given to the item with smallest number of matchable mates. The item of highest priority is matched to the one with smallest number of matchable mates among them. To find out the mates for the unmatched items, the mesh size is enlarged at the next iteration. Beginning with a small mesh, the procedure is repeated until the mesh covers the tolerance intervals of each performance characteristics. A VCR head case is analyzed.