• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.9-9
• /
• 2010

In this paper, High Brightness LED driver IC using new current sensing circuit is proposed. This LED driver IC can provide a constant current with high current precision over a wide input voltage range. The proposed current-sensing circuit is composed of a cascode current sensor and a current comparator with only one reference voltage. This IC minimizes the voltage stress of the MOSFET from the maximum input voltage and has low power consumption and chip area by using simple-structured comparator and minimum bias current. The LED current ripple of the designed IC is in ${\pm}5%$ and a tolerance of the average LED current is lower than 2.43%. This shows much improved feature than the previous method. Also, protections for input voltage and operating temperature are designed to improve the reliability of the designed IC. Designed LED driver IC uses $1{\mu}m$ X-Fab. BiCMOS process parameters and electrical characteristics and functioning are verified by spectre(Cadence) simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.2
• /
• pp.296-303
• /
• 2001

Kachanov-Rabotnov(K-R) creep damage theory was reviewed, and applied to design a creep curve for type 316LN stainless steel. Seven coefficients used in the theory, i.e., A, B, k, m, λ, r, and q were determined, and their physical meanings were analyzed clearly. In order to quantify a damage parameter ($\omega$), cavity amount was measured in the crept specimen taken from interrupted creep test with time variation, and then the amount was reflected into K-R damage equations. Coefficient λ, which is regarded as a creep tolerance feature of a material, increased with creep strain. Mater curve with λ=2.8 was well coincided with an experimental one to the full lifetime. The relationship between damage parameter and life fraction was matched with the theory at exponent ${\gamma}$=24 value. It is concluded that K-R damage equation was reliable as the modelling equation for type 316LN stainless steel. Coefficient data obtained from type 316LN stainless steel can be utilized for life prediction of operating material.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.1
• /
• pp.23-28
• /
• 2015

Measuring the distances between signals in the signal space is usually determined by obtaining the ideal metric which is not easy to obtain. In this research we have investigated the scheme that measures the distances between the signals constructed with the measured voltage signals connected to electric apparatus using Kalman filter and exponential mapping. The metric is defined on the feature signals obtained via the estimation process of a Kalman filter and the mapping process using the exponential transformation. Diagnosis is on the voltage fluctuations is applied to determining whether the system is in the stable state or not due to the unexpected accidents, such as power overcharge, discharge, outages flow may be the cause of the accident. The decision making scheme evaluated with respect to the effectiveness and the degree of complication with different variances. Two methods, the Hard Limit Threshold Scheme(HLTS) and the Interval Energy Scheme(IES) are proposed and compared. In experiments the IES shows better tolerance to impulse noise than the HLTS.

• The Journal of Korean Academy of Sensory Integration
• /
• v.16 no.3
• /
• pp.1-10
• /
• 2018

Objective : The purpose of this study was to investigate smartphone addition and sensory processing character depend on gender for occupational therapy (OT) students, and to identify the correlation between smartphone addiction and sensory processing feature. Methods : Participants of this study were 168 (70 male/90 female) students majoring occupational therapy. Measurements in this study were a questionnaire about general information of subject, smartphone addiction scale, and adult/adolescent sensory profile. Data collection period was from November 2017 to March 2018. Methods for the data analysis included descriptive statistics, independent t-test and Pearson correlation of SPSS 22.0. Results : In term of the purpose of using smartphone, majority response was communication and gaming ranked in next. There were difference between male and female in the total smartphone addition, cyberspace-oriented relationship, withdrawal and tolerance. The result showed that all sensory processing are related with total smartphone addition (r = .236 ~ .603) for man. And for women, total smartphone addition is little related with the taste/smell processing (r= .290), visual processing (r= .324), touch processing (r= .214), low registration (r= .214), sensory sensitivity (r= .243), and sensory avoiding (r= .217). Conclusion : This study found that there is difference between male and female in terms of relation between smartphone addition and sensory processing feature according for occupational therapy students.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.2
• /
• pp.301-314
• /
• 2016

Juels and Sudan's fuzzy vault scheme has been applied to various researches due to its error-tolerance property. However, the fuzzy vault scheme does not consider the difference between people's preferences, even though the authors instantiated movie lover' case in their paper. On the other hand, to make secure and high performance face authentication system, Nyang and Lee introduced a face authentication system, so-called fuzzy face vault, that has a specially designed association structure between face features and ordinary fuzzy vault in order to let each face feature have different weight. However, because of optimizing intra/inter class difference of underlying feature extraction methods, we can easily expect that the face authentication system does not successfully decrease the face authentication failure. In this paper, for ensuring the flexible use of the fuzzy vault scheme, we introduce the bucket structure, which differently implements the weighting idea of Nyang and Lee's face authentication system, and three distribution functions, which formalize the relation between user's weight of preferences and system implementation. In addition, we suggest a matchmaker scheme based on them and confirm its computational performance through the movie database.

• Journal of Internet Computing and Services
• /
• v.21 no.6
• /
• pp.13-21
• /
• 2020

The Android author identification study can be interpreted as a method for revealing the source in a narrow range, but if viewed in a wide range, it can be interpreted as a study to gain insight to identify similar works through known works. The problem found in the Android author identification study is that it is an important code on the Android system, but it is difficult to find the important feature of the author due to the meaningless codes. Due to this, legitimate codes or behaviors were also incorrectly defined as malicious codes. To solve this, we introduced the concept of survival network to solve the problem by removing the features found in various Android apps and surviving unique features defined by authors. We conducted an experiment comparing the proposed framework with a previous study. From the results of experiments on 440 authors' identified apps, we obtained a classification accuracy of up to 92.10%, and showed a difference of up to 3.47% from the previous study. It used a small amount of learning data, but because it used unique features without duplicate features for each author, it was considered that there was a difference from previous studies. In addition, even in comparative experiments with previous studies according to the feature definition method, the same accuracy can be shown with a small number of features, and this can be seen that continuously overlapping meaningless features can be managed through the concept of a survival network.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.301-306
• /
• 2012

We propose a method for accurate image acquisition in a machine vision system in the present study. The most important feature is required by the various lenses to implement real and of the same high quality image-forming optical role. The input of the machine vision system, however, is generated due to the aberration of the lens distortion. Transformation defines the relationship between the real-world coordinate system and the image coordinate system to solve these problems, a mapping function that matrix operations by calculating the distance between two coordinates to specify the exact location. Tolerance Focus Lens caused by the lens aberration correction processing to Galvanometer laser precision machining operations can be improved. Aberration of the aspheric lens has a two-dimensional shape of the curve, but the existing lens correction to linear time-consuming calibration methods by examining a large number of points the problem. How to apply the Bilinear interpolation is proposed in order to reduce the machining error that occurs due to the aberration of the lens processing equipment.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.7-21
• /
• 2000

This paper describes an overview of the thixoforming and thixomolding processes. Semi-solid metalworking (SSM), which is called the thixoforming process of aluminium materials, incorporates the elements of both casting and for the manufacture of near net shape parts. The SSM has some advantages such as net shape or near net shape manufacturing, the ability to form thin walls, excellent surface finish, tight tolerance, and excellent dimensional precision. The thixomolding process of Mg alloy (AZ9l) is a combination of two technologies both conventional die casting and plastic injection molding. The feed material used is a machined chip with a geometry of approximately 1 mm square and a length of 2~3 mm. The semi-solid forming (SSF) of high quality aluminium and magnesium parts will be established in the automotive and electronic industry, in the future. The hybrid method of casting/forging has been caused attention. This process uses a preformed material made by casting instead of the wrought material and finishes it by a single forging process. This process is expected to lower costs without sacrificing the mechanical and finishes it by a single forging process. The process is expected to lower costs without sacrificing the mechanical properties. The authors, intending that the casting/forging process contributes to a reduction in production cost of aluminum automotive parts in Korea, describes the feature of the casting/forging process, aluminum alloys suitable for the cast preform, microstructure and mechanical properties of the cast preform, application examples of cast/forging, and further study.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.145-150
• /
• 2001

A Controlled Ecological Life Support System(CELSS) is essential for man to live a long time in a closed space such as a lunar base or a mars base. Such a system may be an extremely complex system that has a lot of facilities and circulates multiple substances,. Therefore, it is very difficult task to control the whole CELSS. Thus by regarding facilities constituting the CELSS as agents and regarding the status and action as information, the whole CELSS can be treated as multi-agent system(MAS). If a CELSS can be regarded as MAS the CELSS can have three advantages with the MAS. First the MAS need not have a central computer. Second the expendability of the CELSS increases. Third, its fault tolerance rises. However it is difficult to describe the cooperation protocol among agents for MAS. Therefore in this study we propose to apply reinforcement learning (RL), because RL enables and agent to acquire a control rule automatically. To prove that MAS and RL are effective methods. we have created the system in Java, which easily gives a distributed environment that is the characteristics feature of an agent. In this paper, we report the simulation results for material circulation control of the CELSS by the MAS and RL.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1456-1463
• /
• 2010

The safety critical systems in nuclear power plants should be designed to have a high level of fault tolerant capability because those systems are used for protection or mitigation of the postulated accidents of nuclear reactor. Due to increasing of the system complexity of the digital based system in nuclear fields, the reliability of the digital based systems without an auto-test or a self-diagnostic feature is generally lower than those of analog system. To overcome this problem, additional redundant architectures in each redundant channel and self-diagnostic features are commonly integrated into the digital safety systems. The self diagnostic function is a key factor for increasing fault tolerant capabilities in the digital based safety system. This paper presents an availability and safety evaluation model to analyze the effect to the system's fault tolerant capabilities depending on self-diagnostic features when the loss or erroneous behaviors of self-diagnostic function are expected to occur. The analysis result of the proposed model on the several modules of a safety platform shows that the improvement effect on unavailability of each module has generally become smaller than the result of usage of conventional models and the unavailability itself has changed significantly depending on the characteristics of failures or errors of self-diagnostic function.