• Journal of Food Hygiene and Safety
• /
• v.19 no.3
• /
• pp.112-118
• /
• 2004

It has been reported that various kinds of chinese herbs have an activity of promote growth rate in both animals and human. To investigate the growth promoting effect of the selected plants, fish and pigs were used as experimental animals. In fish, Eleutherococcus senticosus extract and Artemisia capillasis extract were found to be most effective. And these plant extracts were given to pigs. The result showed that plant extracts-fed pigs were significantly increased their body weight gain at 7.06% of average daily gain, as compared to control. The verify this results, secreted growth hormone (GH)levels and insulin-like growth factor-1 (ICF-1) levels into blood were measured. This result indicated that GH and IGF-1 levels in the blood in plant extracts-fed pigs were higher that those of control. To confirm growth promotion effect on human, we manufactured the mixture of these plant extracts, and coated this mixture onto rice, named as $Kiwoomi^{TM}$. When we administered $Kiwoomi^{TM}$ to elementary students, it was found to be effective in growth promotion. This result showed that $Kiwoomi^{TM}$-treated elementary students significantly increased their growth rate (about 2.14 times), as compared to untreated children. Taken together, it is suggested that this functional rice ($Kiwoomi^{TM}$) might be helpful for growing children without any side effects.

• Journal of Korean Society of Forest Science
• /
• v.78 no.3
• /
• pp.263-273
• /
• 1989

Accurate and cost-effective classification of forest vegetation is the primary goal for forest management and utilization of forest resources. Aerial photograph and remote sensing are the most frequent and effective method in forest resources inventories. TM and MSS are the principal observing instruments on the Landsat-4 and -5 earth observing satellite. Especially TM has considerably greater spatial, spectral, and radiometric resolution power than MSS, that is, the IFOV of TM at a nadir is 30m compared to 80m for MSS. In this study, we used TM data to classify forest types and compared the result with forest type map manufactured by interpretation of B/W infrared photographs. As a result, land use types were well defined with TM data. But classifying forest types was a little difficult and indistinct. However, the spectral signatures of forest in every season and growing stages remained as problems to be solved, and also the most effective selection and combination method of bands for differentiating the spectral plots among classes.

• Korean journal of applied entomology
• /
• v.62 no.3
• /
• pp.161-169
• /
• 2023

Thrips are usually not exposed to insecticide spray due to hiding at holes, gaps, or crevices of host plants with their relatively small body sizes. This study devised a strategy to use a contact pheromone to suppress the seclusive behavior of the thrips, A contact pheromone identified as 7-methyltricosane (7TM) in the western flower thrips, Frankliniella occidentalis, was added to the diet to test the preference of the thrips. Although 7TM did not change the larval behavior, it significantly induced the avoiding behavior in male adults. In contrast, the contact pheromone was preferred by the female adults. Similar behavioral changes were also observed in another flower thrips, Frankliniella intonsa. Based on the behavioral changes induced by the contact pheromone, a mixture of 7TM and insecticide was applied to thrips infesting hot peppers in field conditions. Compared to spinetoram treatment, its mixture treatment with 7TM enhanced the control efficacy against thrips. Interestingly, 7TM treatment alone also gave slight reduction in F. intonsa density, suggesting a behavioral disruption of thrips by the contact pheromone. This study suggests a novel technology to control insect pests using contact pheromone by suppressing the seclusive behavior to avoid exposure to insecticide spray.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.3
• /
• pp.221-230
• /
• 2006

Recently, the need for esthetic results has increased the interest for all-ceramic crown prosthesis. Furthermore, the development of zirconium core via CAD/CAM system has allowed the all ceramic restorations to be applied to almost all fixed prosthesis situations. But, the increased strength has been reported to increase in proportion with the bond strength of cement, and recently, the tribochemical system which increases the bond strength through, silica coating and silanization has been introduced. The purpose of this study was to compare the $Rocatec^{TM}$ system and $CoJet^{TM}$ system with the traditional acid etching and silanization method of the irconium based ceramic. The surface character was observed via SEM(X2000), and the bond strength with the resin cement were measured. 50 In-Ceram Zirconia (Adens, Korea) discs were fabricated and embedded in resin, group 1 was treated with glass-bead blasting and cleaning, group 2 was treated with 20% HF for 10 minutes and silanized, group 3 was treated with the $Rocatec^{TM}$ system, and group 4 was treated with the $CoJet^{TM}$ system. Each group was comprised of 10 specimens. The specimens were cemented to a $3mm{\times}5mm$ resin block with Super-Bond C&B. The shear bond strength was measured with the $Instron^{(R)}$ 8871 at a crosshead speed of 0.5mm/min. The results were as follows. 1. According to SEM results, there were little difference between group 1 & group 2, but in group 3 and 4, silica coating was detected and there was increase in surface roughness. 2. The shear bond strength decreased in the order of group 3(46.28MPa), group 4(42.04MPa), group 2(31.56MPa), and group 1(27.46MPa). 3. There was significant differnce between group 1&2 and group 3&4(p<0.05). From the results above, it can be considered that the conventional method of acid etching and silane treatment cannot increase the bond strength with resin cements, and that by applying the tribochemical system of $Rocatec^{TM}$ system and $CoJet^{TM}$ system, we can achieve a stronger all ceramic restoration. Further studies on surface treatments to increase the bond strength are thought to be needed.

• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.953-960
• /
• 2022

The measurement of branching ratio of ¹⁶⁷Yb radioactive isotopes from gamma-ray spectrum of ¹⁶⁹Tm(p,3n)¹⁶⁷Yb reaction were performed by using a 100-MeV proton linear accelerator of the Korea Multi-purpose Accelerator Complex (KOMAC). The ¹⁶⁷Yb isotope has a half-life of 17.5 minutes and decays to ¹⁶⁹Tm. The gamma rays generated from the ¹⁶⁷Yb isotope were measured using an HPGe detector gamma ray spectroscopy system. The energy calibration of the detector and the efficiency measurement of the detector were determined using a standard source. The gamma rays of known main energy (62.9, 106.2, 113.3, 143.5 and 176.3 keV) were measured. On the other hand, information about the intensity of the generated gamma rays is very inaccurate. Therefore, in this study, the decay strength of the main gamma rays was accurately measured. Overall, it was different from the previously known results, and in particular, it was found that the intensity of the main decay gamma ray, such as the 113.3 and 106.2 keV gamma ray, was overestimated, and it was found that the gamma ray, such as 62.9, 116.7 and 143.5 keV was underestimated. The present results are considered to be important information in the fields of nuclear fusion, astrophysics and nuclear physics in the future.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.190.2-190.2
• /
• 2010

LIDAR는 레이저를 대기에 송출하여 미세먼지의 이동에 의한 도플러 위상차를 검출함으로써 3차원 풍속벡터를 측정하는 원격탐사 장비로, 한국에너지기술연구원은 국내최초로 WindCube LIDAR를 도입하여 운영 중에 있다. LIDAR의 장점은 이동성, 설치의 편리성 외에도 현재까지 풍황탑이 모든 범위를 측정하지 못한 풍력발전기 블레이드 회전면 최고 높이인 지면 150m 까지의 풍속분포를 상세하게 측정할 수 있다는 특장점이 있다. WindCube LIDAR는 총 10개의 측정 고도를 설정할 수 있으며 1Hz로 원시자료를 획득하여 10분 평균자료로 저장한다. 이러한 측정자료를 통하여 기존 기상탑에서 불가능하였던 풍속분포의 정확한 이해와 난류특성의 파악이 가능하게 되었으나 반대급부로 급증한 측정자료의 정리와 분석에 많은 시간과 노력이 필요하게 되었다. 이에 한국에너지기술연구원에서는 LIDAR 측정자료의 가공 및 분석에 편리성을 제공하기 위해 KIER-$LidarWind^{TM}$ 프로그램을 개발하였으며, 2차원 등치선도 및 3차원 풍속분포 그래프를 시각함으로써 입체적인 가공 및 분석이 가능하도록 하였다.

• Journal of Pharmaceutical Investigation
• /
• v.17 no.3
• /
• pp.135-139
• /
• 1987

This study was attempted to investigate the dissolution rate and the bioavailability of commercially available sulfamethoxazole and trimethoprim (SMX-TM) tablets in rabbits. The dissolution test was conducted in artificial gastric juice by basket method with eight SMX-TM tablets which were chemically equivalent. According to the dissolution rate, SMX-TM tablets were divided into four groups, such as rapid, intermediate, slow and very slow groups for the bioavailability test in rabbits. The results were as follows: 1) The dissolution rate of brand A was most rapid but brand H was most slow in artificial gastric juice. 2) Area under the blood concentration curve was larger in the order of brand A > C > E > H in rabbits. 3) There was a little difference in pharmacokinetic parameters such as biological half life, absorption rate constant and $t_{max}$. 4) The relationship between the dissolution rate and relative bioavailability was significant in brand A, C, E and H. From the results of this experiment, the bioavailability of SMX-TM tablets in rabbits may be predicted from the results of dissolution rate studies.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.829-836
• /
• 2009

3-Dimensional flow which is represented by horseshoe vortex is generated as a type of secondary flow about the main flow. As well, it causes the flow loss. The present study deals with the leading edge fence shape on a wing-body junction to decrease a horseshoe vortex, one of the main factors to generate the secondary flow losses. The shape of leading-edge fence was optimized with the design variables of the installed height, length, width, and thickness of the fence as the design variables. Approximate optimization design method is used as the optimization. The study was investigated using $FLUENT^{TM}$ and $iSIGHT^{TM}$. Total pressure coefficient of the optimized design case was decreased about 7.5 % compare to the baseline case.

• Current Optics and Photonics
• /
• v.4 no.3
• /
• pp.238-246
• /
• 2020

The heat distribution in crystals in a 2-㎛ acousto-optic Q-switched Tm:LuAG laser pumped by pulsed-laser-diode (pulsed-LD) intermittent-pumping technology was analyzed using COMSOL software. The thermal lensing effect of the Tm:LuAG crystal can be mitigated by pulsed-LD intermittent-pumping techniques. An experimental setup using this kind of approach achieved maximum output energy of 8.31 mJ, minimum pulse width of 101.9 ns, and highest peak power of 81.55 kW, reached at a Q-switched repetition rate of 200 Hz. It offers significant improvement of performance of the output laser beam, compared to pulsed-LD double-ended pumping technology at the same repetition rate.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.47-53
• /
• 2014

LTE-Advanced is the evolved version of LTE which is currently in progress at the 3GPP. At present, as the number of smart phone users is rapidly increasing, the demand for ever more capacity is driven largely by video usage and high quality data communication and so on, this let more researchers study about LTE-A all over the world. LTE-A aims to achieve improved service and communication quality over 3G system at the aspect of throughput, peak data rate, latency, and spectral efficiency. Among various features in LTE-A, the multi-user MIMO(MU-MIMO), in which the base station transmits several streams to multiple receivers, has expected to give better quality for system. In this paper, we investigate performances of various types of downlink receivers with fixed number of antennas. we first review the development process from LTE to LTE-A. Second we introduce TM9 which is adopted in Rel.10 for MU-MIMO system, including the MU-MIMO system model and the explanation on the algorithm used in system. We also have brief introduction about sub-blocking in turbo decoding, finally we compare the performance between the uncoded case and coded case which is using turbo encoding.