• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.221-232
• /
• 2006

The purpose of this study was to investigate the effect of step-curing mode on polymerization shrinkage and contraction of composite resin restoration. Class I cavities were prepared on the extracted human premolars. The cavities were ailed with Filtek $Z-250^{TM}$ (hybrid resin, 3M ESPE, USA) and Filtek $flow^{TM}$ (flowable resin, 3M ESPE, USA) and cured with one of the following irradiation modes; Halogen 40sec with continuous curing, LED 10sec with continuous curing, and LED 13sec with step-curing. Contraction stress was measured with strain gauge which was connected to TML $Datalogger^{TM}$ (TDS-102, SOKKI, Japan) and resin-dentin interfaces were observed by scanning electron microscope. The results of present study can be summarized as follows : 1. Composite resin restoration showed transient expansion just after irradiation of curing light. Contraction stress was increased rapidly at the early phase of polymerization and reduced slowly as time elapsed (P<0.05) 2. $Filtek\;flow^{TM}$ showed lower contraction stress than Filtek $Z-250^{TM}$ regardless of curing modes. 3. LED step-curing mode showed lowest contraction stress in Filtek $Z-250^{TM}$ compared with other curing modes(P<0.05). 4. LED step-curing mode showed lowest contraction stress in $Filtek\;flow^{TM}$ compared with other curing modes(P<0.05), but difference in contraction stress was not so greate as in $Filtek\;Z-250^{TM}$. 5. Polymerization of composite resin by LED light with step-curing mode and halogen light with continuous ode resulted in better marginal sealing than LED light with continuous mode.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.2
• /
• pp.79-87
• /
• 2017

GenesWell$^{TM}$ BCT is a 12-gene test suggesting the prognostic risk score (BCT Score) for distant metastasis within the first 10 years in early breast cancer patients with hormone receptor-positive, HER2-negative, and pN0~1 tumors. In this study, we validated the analytical performance of GenesWell$^{TM}$ BCT. Gene expression values were measured by a one-step, real-time qPCR, using RNA extracted from FFPE specimens of early breast cancer patients. Limit of Blank, Limit of Detection, and dynamic range for each of the 12 genes were assessed by serially diluted RNA pools. The analytical precision and specificity were evaluated by three different RNA samples representing low risk group, high risk group, and near-cutoff group in accordance with their BCT Scores. GenesWell$^{TM}$ BCT could detect gene expression of each of the 12 genes from less than $1ng/{\mu}L$ of RNA. Repeatability and reproducibility across multiple testing sites resulted in 100% and 98.3% consistencies of risk classification, respectively. Moreover, it was confirmed that the potential interference substances does not affect the risk classification of the test. The findings demonstrate that GenesWell$^{TM}$ BCT have high analytical performance with over 95% consistency for risk classification.

• Korean Management Science Review
• /
• v.26 no.3
• /
• pp.11-21
• /
• 2009

In this paper, we proposed some valuable analysis results of cultivation campaign marketing in A mobile telephone company. The cultivation campaign marketing is a new outbound TM campaign strategy composed of 4 steps for new subscribers. During the analyses, attrition rate of A mobile company, outbound TM rejection rate, contact rate/call success rate and additional service attrition rate after subscription are measured as an effect of cultivation campaign. The results showed that there were no statistical significance in improving retention rate between customers experienced 4 step cultivation campaign and control group. However, the cultivation campaign had a better effect on improving response rate and success of selling additional service product of mobile company compared to general selling campaign. This is because cultivation campaign group had been taking care of from subscription time. It is suggested that cultivation campaign had better confined customers more likely to buy additional service to outbound TM for the sake of financial efficiency.

• Journal of Information Technology Services
• /
• v.7 no.1
• /
• pp.195-204
• /
• 2008

As the dependency to network system and demands of efficient storage systems rapidly grows in every networking filed, the current trends initiated by explosive networked data grow due to the wide-spread of internet multimedia data and internet requires a paradigm shift from computing-centric to data-centric in storage systems. Furthermore, the new environment of file systems such as SAN(Storage Area Network) is adopted to the existing storage paradigm for providing high availability and efficient data access. We describe the design issues and system components of $SANique^{TM}$, which is the cluster file system based on SAN environment. We, especially, present the comparative results of performance analysis for the intensive I/O test by using the DBMSs that are operated at the top of cluster file system $SANique^{TM}$, EXT3 and NFS respectively.

• Korean Journal of Remote Sensing
• /
• v.5 no.2
• /
• pp.91-107
• /
• 1989

The purpose of this study is to investigate ways to use Landsat TM data for geological mapping and minieralized area detection. The study was carried out in Kyongju-Pohang area where toseki and bentonite mines are distributed. Rock samples of 18 granites, andesites, toseki, betonites, sedimentary rocks and altered rocks in the study area were collected for the study. The radiometric measurtment of the rock samples were carried out with a radiometer in the laboratory and in the field. The Landsat TM bands 2,3,4,5,7 were used for the measurement. The radiometric characteristics of the sample were mainly processed by the principal component analysis. It was found that the pricipal component analysis of the radiometric characteristics of geologic materials is very useful for the detection of the alteration of rocks and grade of mineral contents. It is expected that the technique can be used in the future for the efficient exploration of minerals in this country and abroad.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.244.3-245
• /
• 2003

ABSTRACT-The purpose of the present study was to evaluate the bioequivalence of two enalapril maleate tablest, $Renitec^{TM}$(MSD Korea Ltd.) and $Enalace^{TM}$(Welfide Korea Ltd.), according to the guidelines of Korea Food and Drug Administration (DFDA). Twenty-four normal male volunteers, 22.33 ${\pm}$ 2.55 year in age and 66.54 ${\pm}$ 8.30 kg in body weight, were divided into two groups and a randomized 2${\times}$2 cross-over study was employed. After two tablets containing 10 mg of enalapril maleate per tablet were orally administered, blood was taken at predetermined time intervals and concentrations of enalapril in plasma were determined using LC-MS-MS. (omitted)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.9 s.240
• /
• pp.1276-1281
• /
• 2005

Compound semiconductors are the semiconductors composed of more than two chemical elements. Lithium Tantalate$K_I$ wafer is used for several optical devices, especially surface acoustic wave(SAW) device. Because of the lithography in SAW device process, $LiTaO_3$ polishing is needed. In this paper, the commercial slurries $(NALC02371^{TM},\; ILD1300^{TM},\;ceria slurry)$ used for chemical mechanical polishing(CMP) were tested, and the most suitable slurry was selected by measuring material removal rate and average centerline roughness$(R_a)$. From these result, it was proven that $ILD1300^{TM}$ was the most suitable slurry for $LiTaO_3$ wafer CMP due to the chemical reaction between solution in slurry and material.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.1
• /
• pp.5-15
• /
• 2001

For estimating paddy field area with Landsat TM images, two dates, May 31, 1991 (transplanting stage) and August 19, 1991 (heading stage) were selected by the data analysis of digital numbers considering rice cropping calendar. Four different estimating methods (1) rule-based classification method, (2) supervised classification(maximum likelihood), (3) unsupervised classification (ISODATA, No. of class:15), (4) unsupervised classification (ISODATA, No. of class:20) were examined. Paddy field area was estimated to 7291.19 ha by non-classification method. In comparison with topographical map (1:25,000), accuracy far paddy field area was 92%. A new image stacked by 10 layers, Landsat TM band 3,4,5, RVI, and wetness in May 31,1991 and August 19,1991 was made to estimate paddy field area by both supervised and unsupervised classification method. Paddy field was classified to 9100.98 ha by supervised classification. Error matrix showed 97.2% overall accuracy far training samples. Accuracy compared with topographical map was 95%. Unsupervised classifications by ISODATA using principal axis. Paddy field area by two different classification number of criteria were 6663.60 ha and 5704.56 ha and accuracy compared with topographical map was 87% and 82%. Irrespective of the estimating methods, paddy fields were discriminated very well by using two-date Landsat TM images in May 31,1991 (transplanting stage) and August 19,1991 (heading stage). Among estimation methods, rule-based classification method was the easiest to analyze and fast to process.

• The Journal of the Korean dental association
• /
• v.50 no.1
• /
• pp.31-37
• /
• 2012

Objective : This research compared stabilities between two types of dental implant ($SLA^{TM}$, Institut Straumann AG, Waldenburg, Switzerland and $SSII^{TM}$, Osstem co, Busan, Korea) using Osstell Mentor (Integration Diagnostics AB, Goteborg, Sweden) considering surgery methods, surgery area, diameter of implant, systemic disease, and smoking for obtaining prognosis information when installing fixture of dental implant. Materials & Methods : 206 implants of 131 patients taken by resonance frequency analysis (RFA) were determined as a final sample. Dental implants were installed as protocol of supplier by a excellent dentist who had 10 years experience about dental implants. Before connecting abutments (3 months after installation of fixture), RFA were measured twice for buccal and lingual direction to obtain average value. Results : Dental implants at mandible showed significantly higher stabilities significantly than at maxilla (p<0.001). Diameter 4.8 implants had also higher stabilities than diameter 4.1 in case of $SLA^{TM}$ implants (p<0.001). $SLA^{TM}$ implants showed more excellent stabilities than $SSII^{TM}$ implants, especially at posterior area of mandible (p=0.045) and premolar area of maxilla (p=0.032). Conclusions : This research revealed higher stabilities of $SLA^{TM}$ implants than $SSII^{TM}$ implant, especially at posterior area of mandible (p=0.045) and premolar area of maxilla (p=0.032).

• Journal of Biomedical Engineering Research
• /
• v.31 no.3
• /
• pp.227-233
• /
• 2010

This study analyzed performance according to kick point and stiffness of Soft-$golf^{TM}$ shaft. This research team developed soft-$golf^{TM}$ as a new fusion sports with similar motions with golf and it can be learned safely for all age groups in 2002. The head of Soft-$golf^{TM}$ club is made of zinc alloy and has a mesh or a grid structure, and shaft uses carbon graphite to reduce the total weight of the club. To improve carry distance and to assure consistency of a ball during Soft-$golf^{TM}$ swing, this study manufactured shaft with various kick points (low, middle and high) and stiffness (stiff, regular, lady, morelady) and analyzed a swing motion with characteristics of each shaft presented in a dynamic condition such as a ball's speed, a head's torsion angle and a ball's deviation with ProAnalyst program through a high-speed camera taking pictures using a swing machine robot system(Robo-7). From all of the results, this study determined an appropriate shaft of Soft-$golf^{TM}$.