• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.2
• /
• pp.145-152
• /
• 2012

As the problems of global warming are brought up recently, many skillful solutions for developing new renewable energy are suggested. One of the most remarkable things is ocean energy. Korea has abundant ocean energy resources owing to geographical characteristics surrounded by sea on three sides, thus the technology of commercialization about tidal current power, wave power is demanded. Especially, Tidal energy conversion system is a means of maintaining environment naturally. Tidal current generation is a form to produce electricity by installing rotors, generators to convert a horizontal flow generated by tidal current into rotating movement. According to rotor direction, a tidal current turbine is largely distinguished between horizontal and vertical axis shape. Power capacity depends on the section size crossing a rotor and tidal current speed. We therefore investigated three dimensional flow analysis and performance evaluation using commercial ANSYS-CFX code for an 100 kW class horizontal axis turbine for low water level. Then We also studied three dimensional flow characteristics of a rotating rotor and blade surface streamlines around a rotor. As a result, We found that torque increased with TSR, the maximum torque occurred at TSR 3.77 and torque decreased even though TSR increased. Moreover we could get power coefficient 0.38 at designed flow velocity.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.257-265
• /
• 2016

The purpose of this study was to develop a strainer that could protect a flow system by blocking the introduction of foreign substances into the pipe of industrial or architectural facilities. Strainers are installed at the front tip of valves, machines, or pumps in the piping line of clean water, oil, or gas. There are Y-type, U-type, and T-type strainers. The study identified problems with the Y-type strainers, develop a "C-type strainer with its inlet and outlet on a straight line" as a more improved new model, and compared them in functions in a full-scale strainer test. The study conducted a full-scale strainer test according to four situations at the flow laboratory of Korea Research Institute of Standards and Science by using the old Y-type strainer and C-type strainer 50A. The test results show that the C-type strainer had a higher capacity coefficient(Kv) than the Y-type one, recording 74.9% when there was no screen, 54.5% when there were no foreign substances in the screen, 54.2% when there was a 15% accumulation of foreign substances, and 52.4% when there was a 30% accumulation of foreign substances. The investigator conducted a test only with the 50A type due to the limitations of life-size strainers, but the results demonstrate that the C-type strainer had better flow characteristics than the Y-type one.

• Weed & Turfgrass Science
• /
• v.5 no.2
• /
• pp.101-104
• /
• 2016

Curvularia leaf blight of creeping bentgrass (Agrostis stolonifera) putting green by caused Curvularia trifolii was observed in Hapcheon, Korea. In July to September 2014, curvularia leaf blight developed on leaf blades of creeping bentgrass as small water-soaked lesions that subsequently turned into dark-colored, necrotic spots. The spots were expanded and became gray, grayish-brown, or light brown, circular to oblong lesions with purple to dark brown borders that often were surrounded by a yellow halo. The necrotic lesions coalesced, became irregular in shape and caused tip or complete blighting of the leaves. Blighted leaf blades appeared grayish-white to tan. The fungus was identified by morphological characters and 16S rDNA sequencing as C. trifolii. Conidia of the pathogen were short, with predominantly 3-septa, straight or often curved, with end cells frequently paler than intermediate cells. Size of the 3-septate conidia in culture are $26{\sim}28{\times}11{\sim}12{\mu}m$. Pathogenicity of the fungus was proved by artificial inoculation on the host. This is the first report of C. trifolii causing leaf blight on creeping bentgrass in Korea.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.30-35
• /
• 2006

To evaluate the change of working length with various instrumentation techniques in curved canals, working length and canal curvature were determined before and after canal instrumentation in buccal or mesial canals of extracted human molars. Stainless steel K-files ($MANI^{(R)}$, Matsutani Seisakusho Co. Takanezawa, Japan), nickel-titanium K-files (Naviflex $NT^{TM}$, Brassier, Savannah, USA) , $ProFile^{(R)}$, and ProTaper (Dentsply-Maillefer, Ballaigues, Switzerland) were used to prepare the canals with crown-down technique. In two hand instrumentation groups coronal flaring was made with Gates Glidden burs. Apical canals were instrumented until apical diameter had attained a size of 30. Positional relation between the tooth apex and the $\#10$ K-file tip was examined by using AutoCAD 2000 (Autodesk Corp., San Rafael. CA, USA) under a stereomicroscope before and after coronal flaring, and after apical instrumentation. Degree of canal curvature was also measured with Schneider's method in radiographs. Data of working length and canal curvature changes were statistically analyzed with one-way ANOVA and Tukey's studentized range test. Working length and canal curvature were decreased significantly in each step in all instrumentation groups. Coronal flaring using Cates Glidden burs in hand instrument groups and whole canal instrumentation using stainless steel hand K-files caused significantly more working length change than in ProFile instrumentation group (p<0.05). The result of this study demonstrates that all of the above kinds of instrumentation in curved canals cause reduction of working length and canal curvature at each instrumentation steps, and hand instrumentation causes more working length change than ProFile.

• Food Science and Preservation
• /
• v.21 no.2
• /
• pp.175-180
• /
• 2014

This study was conducted to investigate the physicochemical quality properties of oriental melon pickles harvested after pollination (green and fully ripe period) and soaking (cured and ripened). After the increase of the pollination size of melon, at 21 days, melon had a strong yellowish color, but at 24 days, its tip was completely yellow. In addition, 21 days after 5 days soaking, the weights of the harvested melons were reduced. Since then, there were no remarkable changes in weight. At 27 and 30 days, the b values of the melons that were harvested showed no trace of influence by the number of days of soaking and ripening. The melons harvested after 24 and 27 days, and the oriental melon pickles, maintained a constant hardness and texture after five days of soaking. This result indicates that melons harvested between 15 and 27 days after pollination can be used for melon pickles. To produce high-quality melon pickles with a yellowish color and a chewy texture, melons harvested 27 days after pollination and then soaked and ripened in salt water for 15 days should be used.

• Korean journal of applied entomology
• /
• v.46 no.2
• /
• pp.269-274
• /
• 2007

This study was performed to estimate the efficacy of three commercial mating disruptors for the control of oriental fruit moth, Grapholita molesta (Busck), using a food-baited trap to collect field females. Mated female ratios estimated in the mating disruptor-treated areas were compared with the estimates of male trap captures, and both estimates were evaluated on the basis of crop damage measured by shoot tip damage caused by G. molesta. Both males and females were attracted to the food trap-baited with terpinyl acetate in apple orchard. Spermatophore of G. molesta was similar to female bursa copulatrix in size. Though there was more than 95% reduction in male trap captures indicating significant mating disruption, significant crop damage occurred on apple leaf buds, in which more than 35% of captured females were mated. This study demonstrates that assessment of the mated females would be more reasonable to represent the efficacy of mating disruptor(s) than the assessment of the male captures in G. molesta.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.124-130
• /
• 2012

The uniform nanofibers of poly(L-lactide-$co$-${\varepsilon}$-caprolactone) (PLCL) with different contents of marine collagen (MC) were successfully prepared by electrospinning method. The effects of the major parameters in electrospinning process such as tip to target distance (TTD), voltage, nozzle size and flow rate on the average diameter of the electrospun nanofiber were investigated in generating composite nanofiber. The diameter and morphology of the nanofibers were confirmed by a scanning electron microscopy (SEM). Also, we measured a water contact angle to determine the surface wettability of the nanofibers. The average diameter of the nanofibers decreased as the value of TTD, MC contents, and voltages increased in comparison with that of pristine PLCL nanofiber. In contrast, the diameter of the nanofibers increased as the flow rate and inner diameter of nozzle increased in comparison with that of pristine PLCL. In addition, the hydrophilicity of the nanofiber and attachment of MG-63 cells on the sheets increased as incorporated collagen contents increased. Therefore, the marine collagen would be a potential material to enhance cellular interactivity of synthetic materials by mimicking the natural tissue.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.2
• /
• pp.163-170
• /
• 2021

This study was conducted to create a technology to remove acne bacteria with human-friendly materials. First, the Cutibacterium acnes (C. acnes) were adsorbed to the mica disc to grow, and then the biofilm was checked through an atomic microscope to see if the biofilm had grown. Based on the topographic image, the shape changed round, the size was 17% longer on average, and the phase value of the resonance frequency separating materials was observed as a single value, the biofilm grown by covering the extracellular polymeric substrate (EPS). As a result of processing 50 mM of amino acids in the matured biofilm, the concentration of C. acnes decreased when valine, serine, arginine and leucine were treated. Scanning with nanoindentation and AFM contact modes confirmed that the hardness of biofilms treated with Valine (Val) increased. This indicates that an AFM tip measured cell which may have more solidity than that of EPS. The experiment of fluorescent tagged to EPS displays an existence of EPS at the condition of 10 mM Val, but an inhibition of growth of EPS at the 50 mM Val. Number of C. acnes was also reduced above 10 mM of Val. Weak adhesion of biofilm generated from an inhibition of EPS formation seems to induce decrease of C. acnes. Accordingly, we elucidated that Val has an efficiency which eliminates C. acnes by approach of an inhibition of EPS.

• Korean Journal of Ichthyology
• /
• v.33 no.2
• /
• pp.57-63
• /
• 2021

This study was carried out to clarify the egg, larvae and juveniles development of Carassius cuvieri in Nakdong River, Gyeongbuk. The amount of spawning of female C. cuvieri was about 30,400~44,900 (average 37,650±7,250). The egg shape was circular and the size was 1.24~1.37 mm (average 1.31±0.04 mm, n=30). At 100 hours after fertilization, more than of the total embryos were hatched. The newly hatched larvae had an 4.69~5.65 mm in total length (average 5.15±0.31 mm, n=10) and had egg yolk in the abdomen. At 3 days after hatching, the preflexion larvae absorbed all egg yolk was 6.27~6.70 mm in total length (average 6.59±0.08 mm, n=10). On the 10 days after hatching, the postflexion larvae were 8.71~8.92 mm in total length (average 8.81±0.07 mm, n=10), and the tip of the caudal fin was bent at 45°. On the 42 days after hatching, the total length of 15.1~16.8 mm (average 15.8±0.57 mm, n=10) was transferred to juvenile as the number of fins was (iii17 dorsal fins, iii4 anal fins) reached a constant number of each part.

• Korean Journal of Ichthyology
• /
• v.34 no.2
• /
• pp.86-95
• /
• 2022

Egg development and morphological change of larvae and juvenile of the Roughscale sole, Clidoderma asperrimum, were investigated in the present study. Adult fishes were collected on the East Sea, Korea, from 2017 to 2018 and reared in a circular water tank (Ø 6×1 m) at water temperature of 12.8±1.9℃. Fertilized eggs ranged from 1.42 to 1.59 mm (mean 1.51±0.04 mm, n=50) in diameter. The eggs were spherical in shape, transparent, floating and colorless. The egg yolk was separated from the egg membrane 60 mins post-fertilization (PF), and an embryo was formed in 62 hrs PF. More than 50% of the eggs hatched within 144 hrs PF in the range of 10.2~11℃(mean 10.8℃). The size of the newly hatched larvae were 4.22~4.64 mm (mean 4.53±0.16 mm) in total length (TL), their mouth and anus were not open yet. At 10 days after hatching, the preflexion larvae reached 5.88~6.62 mm (mean 6.31±0.33 mm) in TL, and the yolk absorption was completed and the mouth began to open. At 55 days after hatching the larvae reached to flexion larvae stage and they were 10.4~13.3 mm (mean 12.7±1.3 mm) in TL, and the tip of notochord was bent upward. At 120 days after hatching the larvae reached to juvenile stage and they were 35.3~40.5 mm (mean 39.5±2.4 mm) in TL. Their all fins had completed set of the fin-rays (D. 79~94: A. 63~75) and the juveniles adopted a benthic life.