• Journal of Trauma and Injury
• /
• v.36 no.3
• /
• pp.276-280
• /
• 2023

Fungal thrombophlebitis of the central vein is a rare, life-threatening disease associated with significant morbidity and mortality. It requires immediate central venous catheter removal and intravenous antifungal therapy, combined in some cases with either anticoagulation or aggressive surgical debridement. A 70-year-old male patient injured by a falling object weighing 1,000 kg was transferred to our hospital. A contained rupture of the abdominal aorta with retroperitoneal hematoma was treated with primary aortic repair, and a small bowel perforation with mesenteric laceration was treated with resection and anastomosis. After a computed tomography scan, the patient was diagnosed with thrombophlebitis of the left internal jugular vein and brachiocephalic vein. Despite antifungal treatment, fever and candidemia persisted. Therefore, emergency debridement and thrombectomy were performed. After the operation, the patient was treated with an oral antifungal agent and direct oral anticoagulants. During a 1-year follow-up, no signs of candidemia relapse were observed. There is no optimal timing of surgical treatment for relapsed fungal central thrombophlebitis. Surgical treatment should be considered for early recovery.

• The Journal of Korean Physical Therapy
• /
• v.14 no.1
• /
• pp.27-37
• /
• 2002

This is the study of the knee joint injured patients at the orthopaedic surgery clinic where is located in Daejon, who has MCL combine injured ACL reconstruction caused by sport activity and accident during the period from Jan. 2001 to Oct. 2001. By comparing with groups between 7th case of I-group for MCL combined stitch and II-group for ACL reconstruction since 6weeks cast. We have been concluded with that following results. 1. Range of motion for the knee was not limited at 5th case(37%) of I-group, 6th case(42%) of II-group and the cases of Flexion deficit less then 10 -degree were 2nd case(13%) of I-group and II-group 1st case(8%) with no extension deficit more then 5 -degree. 2. The level of activity that tells you whether you are capable of exercise for six month after operation. It han been divided by 3 levels. The case of capable of doing low risk exercise(swimming, cycling, etc.) was 5th case of I-group, the case of capable of doing medium risk exercise(jogging, etc.) was 3rd case of I-group and 4th case of II-group and the case of capable of doing high risk exercise(football, etc.) were 3rd case of I-group and 3rd case of II-group. 3. The timing of the return to their job were average 6.4 weeks for I-group and average 22.9 weeks for II-group(P<.05, statistical difference). 4. There was no statistical difference between I-group and II-group for the timing of the return to their job(P>.05). 5. By using VAS to compare them there was no statistical difference between I-group and II-group of clinical results according to Lysholm scale.

• Development and Reproduction
• /
• v.22 no.3
• /
• pp.245-252
• /
• 2018

To improve survival rates of vitrified pig oocytes, the treatment of cytoskeletal stabilizer on an appropriate time is one of the possible approaches. However, the exact treatment timing and effect of cytoskeletal stabilizer such as cytochalasin B (CB) is not well known during oocyte vitrification procedures. Thus, the present study was conducted to determine optimal treatment timing of CB during vitrification and warming procedures. In experiment 1, the survival rates of the postwarming pig oocytes were analyzed by fluorescein diacetate (FDA) assays with 4 classifications. In results, post-warming oocytes showed significantly (p<0.05) decreased number of alive oocytes (31.8% vs. 86.4%) compared to fresh control. In detail, the significant difference (p<0.05) was found only in strong fluorescence (18.2% vs. 70.5%) not in intermediate fluorescence groups (13.6% vs. 15.9%). In experiment 2, CB was treated before (CB-Vitri) and after (Vitri-CB) vitrification. In results, group of Vitri-CB showed significantly (p<0.05) higher (91.6%) survival rates compared to group of CB-Vitri (83.7%), significantly (p<0.05) and comparable with group of Vitri Control (88.7%) by morphological inspection. In FDA assay results, group of Vitri-CB showed significantly (p<0.05) higher (44.2%) survival rates compared to groups of CB-Vitri (36.7%) and Vitri Control (35.1%). In conclusion, the increased survival rates of post-warming pig oocyte treated with Vitri-CB method are firstly described here. The main finding of present study is that the CB treatment during recovery could be helpful to refresh the post-warming pig oocyte resulting its improved survival rates.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.119-126
• /
• 2019

This study was conducted to investigate the effects of task oriented training on motor and cognitive function recovery in rats with induced Alzheimer's dementia. Thirty Sprague-Dawley rats were randomly assigned to a control group (n=15) and an experimental group (n=15). Training was given three times a week, for 20 minutes a session for 4 weeks. The cognitive and motor functions of the rats were evaluated by an eight arm radial maze test and ladder rung walk test. The eight arm radial maze test showed significant differences between groups according to the time of day 14 and 28 (p<.001). The difference in measured values according to the timing of the two groups was significant (p<.001). Additionally, there was a significant difference between the time and the group interaction (p<.001). The ladder rung walk test showed significant differences between groups according to the time of day 14 and 28 (p<.001). The difference in the measured values according to the timing of the two groups was significant (p<.001), and there was a significant difference between the time and the group interaction (p<.001). As a result, task oriented training for Alzheimer's dementia rats was found to have a positive effect on recovery of motor and cognitive function.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.560-568
• /
• 2005

The proposed Multi-level PDP sustain Driver is composed of the semiconductor devices with low voltage rating compared to those used in the prior circuit proposed by L. Wether, and it has two resonant periods during the charging (rising period) and discharging (falling period) the PDP in the sustaining voltage waveforms. In accordance with the change of timing phase$(T_{r1},\;T_{i1},\;T_{r2})$, the performance characteristics of a commercial PDP module has been carried out and compared the characteristic with the 42V6, made of LG Electronics co., Experimental results show that the performance characteristics of PDP module are greatly influenced by the variation of $T_{i1}\;and\;T_{r2}$. The variation of $T_{r1}$ do not influence much on the performances of PDP. With the conditions that $T_{r1}=60ns,\;T_{i1}=120ns,\;and\;T_{r2}=350ns$, we could get the performances listed as the luminance is increased $14.6\%$, the power consumptions is decreased $5.9\%$, the panel efficiency is increased $24.2\%$, module efficiency is increased $21.2\%$, compared to those shown in the commercial PDP module (42V6). Therefore, the proposed multi-level PDP sustain driver expected to be suitable to actual PDP module application.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.69-74
• /
• 2003

In this paper, we propose the synchronization recovery algorithm which is suitable to wireless Multimedia of wireless channel situation which is being used OFDM signaling method. The basic of the suggested clock synchronization. restoration Algorithm is to getting the shock response of channel or getting the multipath strength profile through IFTT after the getting the frequency, response of deducted channel from channel deducted of receiver and to trace the location in the channel energy concentrated area of timing area. And it also analysis the start point of 64-QAM and 16-QAM if the sampling clock offset has the sample of ${\pm}$ 1-3, and we identified the occurance of performance deterioration when occures more than 2 samples of offset to compare with star point and BER performance in optimum sampling point result of BER performance checking, and we know that the recovery algorithm proposed algorithm also provide excellent synchronization characteries under frequency, selecting fading channel as result of simulation.

• Journal of the Korean Institute of Gas
• /
• v.20 no.3
• /
• pp.1-11
• /
• 2016

Production data from hydraulically fractured well in coalbed methane (CBM) reservoirs was analyzed using decl ine curve analysis (DCA), flow regime analysis, and flowing material balance to forecast the production performance and to determine estimated ultimate recovery (EUR) and timing for applying the DCA. To generate synthetic production data, reservoir models were built based on the CBM propertie of the Appalachian Basin, USA. Production data analysis shows that the transient flow (TF) occurs for 6~16 years and then the boundary dominated flow (BDF) was reached. In the TF period, it is impossible to forecast the production performance due to the significant errors between predicted data and synthetic data. The prediction can be conducted using the production data of more than a year after reached BDF with EUR error of approximately 5%.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.10
• /
• pp.26-36
• /
• 2000

In this paper, we design the nonoverlapping multicarrier modulation (MCM) system for high rate paging system and evaluate the Performance by computer simulation. In conventional paging system, FSK was usually used, but we select QAM for high bandwidth efficiency. Transmitter structure adopts that of 4-16QAM of the iDEN$\^$TM/ and receiver consists of symbol timing recovery, carrier recovery and automatic gain control. In addition, pilot symbol aided modulation (PSAM) which can overcome the simulcast fading channel is considered and we also propose the optimum pilot symbol pattern. Finally, we show the performance of the overall 4-16QAM system by computer simulation.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.55-55
• /
• 1977

This experimental work was conducted in order to find out the optimum time of harvest of Japonica-type(Akibare) and Indica-type(Tong-il) rice variety for three harvesting systems by investigating the harvestirg losses and milling quality. The study was also concerned atout the nature and amount of grain losses incurred during the each sequence of post-harvest technologies, and based on these results, a modification of existing systems giving a minimum grain loss was attempted. Binder, combine, and traditional harvesting systems were tested in this study and five grain moisture levels were disposed according to the decrease of grain moisture. The results are summarized as follows: 1. The total losses of Akibare variety were ranged from 1.1 to 1.5 per cent for the traditional harvesting system, 2.1 to 4.8 percent for the harvesting system by use of binder, and 2.8 to 4.3 percent for the harvesting system by use of combine as the grain moisture content was reduced from 24 to 15 per cent. Milling recovery of the harvesting system by use of binder, 74.8~ 75.7 percent, was a little higher as it was compared to that of traditional harvesting system, 74. 3~75. 0 percent, and that of the harvesting system by use of combine, 73.8~ 75.0 per cent. Head rice recovery of mechanically dried paddy samples was higher than that of sun-dried paddy samples. 2. The total losses of Tong-il variety were ranged from 3.8 to 5.0 per cent for the traditional harvesting system, 5.2 to 10.0 percent for the system by use of binder, and 3.0 to 5.0 perent for the system by use of combine as the grain moisture was reduced from 28 to 16 percent.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.141-148
• /
• 2003

This paper presents and compares several techniques that detect the symbol rate of unknown received signal. Symbol rate is detected from the power spectral density of the circuits such as the delay and multiplier circuit, the square law circuit, and analytic signal, etc. As a result of discrete Fourier transform of the output signals of these circuits, a lot of spectral lines and some peaks appear in frequency domain and the position of first peak is corresponding to the symbol rate. If a spectral line on the frequency that is not located in symbol rate is larger than the first peak, the symbol rate is erroneously detected. Thus, the ratio between the value of first peak and the highest side spectral line is used for the measure of the performance of symbol rate detector. For the MPSK modulation, the analytic signal method shows better performance than the delay and multiplier and square law circuits when the received signal power is lager than -20dB. It is also noted that the delay and multiplier circuit is not able to detect the symbol rate for the QAM modulation.