• Journal of Biomedical Engineering Research
• /
• v.36 no.5
• /
• pp.169-176
• /
• 2015

Implantable closed-loop epilepsy controllers require ideally both accurate epileptic seizure detection and low power consumption. On-chip oscillators can be used in implantable devices because they consume less power than other oscillators such as crystal oscillators. In this study, we investigated the tolerable error range of a lower power on-chip oscillator without losing the accuracy of seizure detection. We used 24 ictal and 14 interictal intracranial electroencephalographic segments recorded from epilepsy surgery patients. The performance variations with respect to oscillator frequency errors were estimated in terms of specificity, modified sensitivity, and detection timing difference of seizure onset using Generic Osorio Frei Algorithm. The frequency errors of on-chip oscillators were set at ${\pm}10%$ as the worst case. Our results showed that an oscillator error of ${\pm}10%$ affected both specificity and modified sensitivity by less than 3%. In addition, seizure onsets were detected with errors earlier or later than without errors and the average detection timing difference varied within less than 0.5 s range. The results suggest that on-chip oscillators could be useful for low-power implantable devices without error compensation circuitry requiring significant additional power. These findings could help the design of closed-loop systems with a seizure detector and automated stimulators for intractable epilepsy patients.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.1
• /
• pp.25-35
• /
• 2018

This paper describes the measurement of pulse positioning (input time) to calculate a time of arrival (TOA) that takes from transmitting a signal from the target of multilateration (MLAT) system to receiving the signal at the receiver. In this regard, this paper analyzes performances of simple threshold method and level adjust system (LAS) method, which is one of the adaptive threshold detector (ATD) methods, among many methods to calculate pulse positioning of signal received at the receiver. To this end, Cramer-rao lower bound (CRLB) with regard to pulse positioning, which was measured when signals transmitted from a transponder mounted at the target were received at the receiver, was induced and then deviation sizes with regard to pulse positioning, which was measured with simple threshold and LAS methods through MATLAB simulations, were compared. Next, problems occurring according to a difference in amplitude of signals inputted to each receiver are described when pulse positioning is measured at multiple receivers located at a different distance from the target as is the case in the MLAT system. Furthermore, LAS method to resolve the problems is explained. Lastly, this study analyzes whether a pulse positioning error occurring due to the signal noise satisfies the requirement (6 nsec. or lower) recommended for the MLAT system when using these two methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9C
• /
• pp.905-913
• /
• 2006

In the impulse radio ultra-wideband communication systems, the residual timing offset exists when the acquisition and tracking of the timing synchronization is well done. And the offset affects the performance of the system dramatically. In order to compensate the offset, we present the digital phase-locked loop that uses the reference signal in the correlation detection receiver. First, we show the degradation of BER performance that is caused by the offset, and then compensation process of the timing tracker and performance improvement. In this paper, the timing detector in the tracker operates at the sampling period of frame level uses the correlation between received and reference signal. Also, we present the performance comparison by using the computer simulation results for different Gaussian monocycle pulses.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4C
• /
• pp.355-361
• /
• 2007

In this paper, the hop-timing estimator, which NED and ELF are adopted to, has been proposed. The estimation performance of the proposed scheme and the conventional scheme is compared through computer simulations. The simulation results show that the new system has less hop-timing error than the conventional system in partial band noise jamming channel. The lover Eb/Nj and ratio of jamming bandwidth(rho) we, the bigger performance enhancement of the proposed system is.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.97-103
• /
• 2019

In this paper, we designed and fabricated a receiving modem that can be applied to guided weapons can change real-time targets with little effect of fading. The designed modem consists of synchronous detector, timing error estimator, timing recovery, differential decoder and viterbi decoder, and it's implemented in FPGA so that it can be redesigned and modified according to requirements. The modem board was directly converted from IF frequency to baseband and converted into digital data through ADC. It is confirmed that it is applicable to the guided weapons that changing real-time targets through simulations, measurements and test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2A
• /
• pp.96-101
• /
• 2003

This paper is on the user equipment (UE) side time tracker design and implementation of the wideband code division multiple access (WCDMA) system. The time tracker is constructed as a second order closed loop including time error detector (TED), loop filter (LP), numerically controlled oscillator (NCO), and sample selector (SS). Through the simulation, we found the gain of the TED as a function of the CPICH power contribution to the total transmission power of the base station. Also we derived the transfer function of the loop and the BER versus DPCH power relationships where timing offsets and loop noise bandwidths are used as parameters. In the curve, we can conclude that there are appropriate loop noise bandwidths according to the given environments for the better performance.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.739-747
• /
• 2013

This paper investigates the multifarious nature of the long-term evolution (LTE) scheme and that of the modified LTE scheme for symbol timing synchronization (STS). This investigation allows us to propose a new replica correlation-based STS scheme to overcome the inherent weaknesses of the other two schemes. The proposed STS signal combines a gold sequence and a half sine wave in the time domain, whereas conventional STS signals specify either binary sequences or complex sequences in the time domain or in the frequency domain. In the proposed scheme, a sufficient correlation property is realized by the gold sequence, and robustness against the frequency offset (FO) is achieved through the sine wave. Compared to the existing LTE-related schemes, the proposed scheme can better achieve immunity to FO and reduction in detector complexity, as well as a low peak-to-average power ratio and a low detection error rate. Performance evaluations through analysis and simulation are provided in the paper to demonstrate these attributes.

• Journal of Communications and Networks
• /
• v.8 no.3
• /
• pp.290-296
• /
• 2006

In this paper, a generalized blind adaptive algorithm is introduced for multi-user detection of direct sequence code division multiple access (OS-COMA) wireless communication systems. The main property of the proposed algorithm is its ability to resolve the multipath fading channel resulting in inter symbol interference (ISI) as well as multiple access interference (MAI). Other remarkable properties are its low complexity and mitigation to the near-far problem as well as its insensitivity to asynchronous transmission. The proposed system is based on the minimization of the output energy and convergence to the minimum mean square error (MMSE) detector. It is blind in the sense that it needs no knowledge of the other users' signatures, only the intended user signature and timing are required. Furthermore, the convergence of the minimum output energy (MOE) detector to the MMSE detector is analytically proven in case of M-ary PSK. Depicted results show that the performance of the generalized system dominates those previously considered. Further improvements are obtained when multiple input multiple output (MIMO) technique is employed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.197-200
• /
• 2006

ATSC DTV시스템에서는 심볼타이밍 동기를 위해서 ATSC규격에 소개되어있는 $77.3{mu}s$ 마다 반복적으로 삽입되어있는 세그먼트 싱크를 이용하는 세그먼트 동기 방법 또는 QAM과 같은 다중레벨을 가지는 신호에 일반적으로 사용되는 가드너(Gardner)방법을 사용한다. 이중 가드너 방법은 매심볼마다 타이밍 에러성분을 추출하므로 다중경로 채널에서 타이밍동기를 추적하면서 유지하는데 유리한 방식이어서 일반적으로 사용한다. 가드너 방법을 이용하는 ATSC DTV시스템에서 가드너 방법에 에러를 검출하기 위해 사용되는 가드너 타이밍 에러 검출기(Timing Error Detector)는 수신단의 파워레벨이 기준 파워레벨에서 크게 벗어날 경우 에러를 검출 할 수 없는 문제점을 가지고 있다. 이를 해결 하기 위해 가드너 타이밍 에러 검출기 블록 앞에 송신파워 레벨과 수신파워 레벨의 비를 이용하여 정상적인 수신 파워 레벨로 수신학 수 있도록 보정하는 블록을 추가하여 전체적인 동기성능을 향상시키는 알고리즘을 제안한다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.336-340
• /
• 2003

The frame synchronization should be acquired before performing other data-aided receiving algorithms, such as data-aided channel equalizing, beam-forming and phase, symbol timing, and frequency synchronizing, since all of them are using preamble or training sequence to estimate the amount of error from the received signal. In this paper, we present a new frame synchronization scheme for underwater ultrasonic image burst transmission system, which computes the correlation between received symbol sequence and one CAZAC sequence, composed of the latter half of the first CAZAC sequence of preamble and the first half of the second CAZAC sequence of preamble and then compares a threshold value. If the correlation value is bigger than the threshold value, the frame detector determines that the frame synchronization is achieved at that sample.