• Transactions of the Korean Society of Automotive Engineers
• /
• 제13권1호
• /
• pp.194-203
• /
• 2005

The process of guaranteeing that a distributed real-time control system will meet its timing constraints, is referred to as schedulability analysis. However, schedulability analysis algorithm cannot be simply used to analyze the system because of complex calculations of algorithm. It is difficult for control engineer to understand the algorithm because it was developed in a software engineer's position. In this paper we introduce a Response-time Analysis Tool(RAT) which provides easy way far system designer to analyze the system by encapsulating calculation complexity. Based on the RAT, control engineer can verify whether all real-time tasks and messages in a system will be completed by their deadline in the system design phase.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권3호
• /
• pp.229-234
• /
• 2021

In this paper, a study was conducted on the power amplifier control required to design an eLoran transmitter system using a low-height antenna. The eLoran transmitter developed during the eLoran technology development project conducted in Korea used a small 35 m antenna due to the difficulty of securing a site for antenna installation. This antenna height is very low compared to the height of 750 m which is required for eLoran 100 kHz signal transmission without any radiation loss. In the case of using such a small antenna, not only the radiation efficiency of the transmission is lowered, but also the power module control must be performed more precisely in order to transmit the eLoran standard signal. The equivalent RLC circuit of the transmitter system was implemented and transient analysis was conducted to derive the input required voltage for satisfying the output requirement. The voltage waveform was also generated by the RLC circuit analysis to generate the eLoran signal. Furthermore, we suggest power width modulation method to control eLoran power amplifier module more sophisticatedly.

• Journal of Power System Engineering
• /
• 제12권4호
• /
• pp.5-11
• /
• 2008

The RI gasoline engine haying a sub-chamber had a high cycle variation due to the difficulty of the residual gas scavenge in the sub-chamber. To solve this problem and improve the combustion performance of RI engine, we devised a method to inject directly CNG fuel into the sub-chamber. A DI diesel engine of single cylinder was converted into a RI-CNG engine and an electronic control unit for the engine was manufactured. In this study, the combustion characteristics of the RI-CNG engine were investigated with the injection timings and air excess ratios at the load conditions of 50% throttle open rate and 1700rpm. As the results from this study, the RI-CNG engine worked reliably under the condition of the ignitable lean limit of $\lambda=1.7$ by showing the $COV_{imep}$ below about 5%. And the highest thermal efficiency could be obtained in the injection timing that produced the high imep and the low $COV_{imep}$ at the same time. The CO emission concentration indicated very low values and the THC and $NO_x$ showed an opposite pattern. With a view to improving the thermal efficiency and reducing the harmful emissions, the proper control region of the ignition timing and the mixture ratio were nearly ATDC $20^{\circ}\sim50^{\circ}$ and $\lambda=1.4$ respectively.

• The Journal of Korean Academy of Sensory Integration
• /
• 제16권2호
• /
• pp.15-25
• /
• 2018

Objective : The purpose of this study was to examine the differences between motor functions and executive functions according to the timing of children with attention deficit hyperactivity disorder (ADHD). Methods : The subjects were 32 children with ADHD aged between 6 and 12 living Busan. To assess the timing, Long Form Assessment (LFA) of Interactive Metronome (IM) was used. Bruininks-Oseretsky of Motor Proficiency, Second Edition (BOT-2) were also used to assess motor functions. STROOP Color and Word Test and Children's Color Trails Test were used to evaluate executive functions. Mann-Whitney U tests were used to determine the differences between the executive functions and the motor functions according to the timing. Results : Comparing the inter-group motor functions according to the timing, there was a statistically significant difference in the Fine manual control and Fine motor precision in BOT-2 (p<.05). Comparing the inter-group executive functions according to the timing, there was not statistically significant difference (p>.05). Conclusion : Among the deficits in ADHD children, we could see the differences between motor function and executive function according to timing function. This study would be meaningful in that the results could be a basic data for study on the timing of children of ADHD in the future.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.121-124
• /
• 2002

The IEEE 802.lla PLCP H/W for Processing efficiently control message between MAC and PHY is designed. Slate machine and clock control according to rate is designed and timing diagram is verified on the FPGA simulation environment.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권4호
• /
• pp.187-193
• /
• 2015

A maritime Differential Global Positioning System (DGPS) reference station broadcasts correction information to users having a DGPS receiver so that the navigation performance can be improved. A maritime DGPS reference station consists of a reference station (RS) that generates and broadcasts correction information, an integrity monitor (IM) that monitors the integrity of correction information, and a control station (CS) that controls them. A maritime DGPS reference station is continuously operated for 24 hours, and thus improvement in the ease of operation is a major element that can improve the performance of the system. In this study, a configuration of a maritime DGPS reference station that can improve the ease of operation and a relevant protocol were proposed, and an example of the implementation of the proposed system was presented.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.591-599
• /
• 2001

The paper identifies a severe form of core saturation instability in an DC/AC interaction system. It then seeks solutions to the problem by HVDC control means. This is achieved by a proper design of the Voltage Dependent Current Order Limiter (VDCOL), the Current Regulator and Timing Pulse generator. Supplementary control loops have also been introduced to result in a satisfactory performance as compared to that obtained one with the use of uncharacteristic harmonic filter on the AC side. Robustness of all the options has been demonstrated through recovery performance of the DC link in response to both I-phase and 3-phase 5 cycle faults on both rectifier and inverter commutating buses.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 한국경영과학회 2005년도 추계학술대회 및 정기총회
• /
• pp.213-216
• /
• 2005

In this research, we explore how to manage the transition of technology generations considering incremental innovation of the existing technology generation. Firms can slow down decaying of the existing technology by continuous incremental improvements rather than introducing a new generation technology at the first time if the former strategy is better. We characterize optimal technology transition problem by setting up an optimal control model. The model which is originally designed and solved by Thompson(1968) as a ‘Machine maintenance problem’ has been cited to build the main body of our model. With this analytical model, we derive optimal ‘incremental innovation’ strategy which is considering transition to the next technology. Our analysis indicates that there exists an unique ‘stopping incremental innovation timing’. Before the point of time, the decision maker should make his effort at a maximum level to enhance the current technology. However from the stopping timing to the final time horizon where the new technology is introduced, it is found that not to invest to the current technology any more is optimal.

• Journal of Korean Society of Transportation
• /
• 제1권1호
• /
• pp.10-27
• /
• 1983

In order to improve the traffic enviroments in the urban streets of Seoul, the computer controlled traffic signal system was installed on 45 intersections at 1980. Afterward, yearly expansion was done to the numbers of 132 intersections and 232 loop detectors. The problems of timing plans were discussed, mainly pedestrian crossing timing as well as the generations of split and offset. The broad urban streets more than 30m require long phasing time of pedestrians, even though the equivalent or correspondent traffic volume is rare. The configuration of computer system for traffic control was disscussed in terms of control strategy. An overview also given. The improvements were measured at every quater. The travel speed improved to 42%, delay time reduced to 41% and number of stops to 43% respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제8권2호
• /
• pp.279-284
• /
• 2013

In this paper, to evaluate the performance of solenoidal typed injector, research and development had been performed on injector controller in order to respond to various performance tests, which is not only economical but easy extensible on its channels. The developed controller based on embedded system is able to precisely control the injection timing and quantity by high-pressured from the injector. Also, it is able to performance evaluation by measuring the electrical characteristics of solenoid. Additionally, it is enable precision timing control of light source and high speed camera as it is able to precisely photograph the timely spray pattern of injector.