• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.170-178
• /
• 2004

This paper deals with six degree-of-freedom HILS(hardware-in-the-loop-simulation) of KSR-III rocket using a TAFMS(three axis flight motion simulator). This TAFMS HILS test is accomplished before main HILS tests in order to verify the control stability in the presence of TAFMS dynamic effects. The TAFMS HILS test includes initial attitude holding tests for INS initial alignment procedures, timer synchronization tests with an auxiliary lift-off signal, real-time calibration tests using an external thermal recorder, open-loop TAFMS operating tests, and final closed-loop TAFMS HILS tests using the TAFMS attitude measurements as inputs to the closed control loop. The HILS tests are accomplished for several flight conditions composed with nominal flight condition, TWD effect added condition, slosh modes and/or bending modes existing condition, and windy condition, etc.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.133-140
• /
• 2005

If a Player car precedes from start to the end or a fuzzy car wins every day during computer or racing games, most players will lose their interest in the games soon after several times. In order to solve this Problem and increase amusement at racing games, the more important thing than anything else is decide the ranking. In this thesis, in order to give amusement In racing games, the researcher made a fuzzy car and made it race with player cars. Because the preceding fuzzy car runs ahead of player cars, it can recognize their behaviors according to change of following player cars' speed and distance, and the fuzzy car changes its memory, but doesn't enforce actual behaviors. If the fuzzy car would make decision, it has to do behaviors to compete the ranking on the basis of the contracts it has memorized under the situation where a timer is awarded. In addition, although an accompanying fuzzy car has different contents of memory, it is operated in the same way as mentioned above. At the time of experiments, the researcher applied the actual value to the test program and drew result for ranking competition. In conclusion, the researcher could confirm that we can have modeling of various behaviors by means of the method using fuzzy logic rather than simple if-then method.

• Proceedings of the Ginseng society Conference
• /
• 1984.09a
• /
• pp.215-223
• /
• 1984

Panax ginseng has often been suggested as a geriatric restorative. This study is a double blind crossover trial to test whether ginseng can improve function in subjects with the depression and reduced abilities associated with senescence. 49 screened subjects were given 1500 mg Korean Red ginseng and identical placebo each for ten days, with a washout period in between the dosages. Standard tests of mental function, neuromuscular reflexes, responsiveness, mood and well being were used. The subjects were somewhat better at the co-ordination and speed test ('number copying') but tests of concentration and memory ('Concentration', 'Paired Association', 'Digit Span' and 'Object Learning') gave equivocal results. There were small improvements in mood and well being ('Life Satisfaction' and 'General Health Questionnaire') while the subjects indicated increased energy, alertness and less sleep, but also less happiness on the daily analogue scales. The major result was a highly significant improvement in reactivity, speed and co-oridnation at the tapping test, and the visual, auditory and disjunctive reaction timer. These are the most objective and accurate tests used in this trial. It is therefore concluded that ginseng can increase function in senile individuals. This effect is most easily visualisable in objective psychophysical tests, rather than the more subjective memory and concentration tests.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.107-112
• /
• 2015

A smart phone and the number of wireless terminals are mobile-to the nature of the AP mobility are many call transfer between wireless terminals and AP (Access Point). Each wireless terminal that is the call processing process for each is relatively large to cause the wireless traffic, and a factor that inhibits the efficient use of the radio band on the AP. In this paper, we use the power intensity threshold and threshold timer of the AP received by the mobile station to reduce the amount of switching traffic between the AP's cause and traffic generation factors between the wireless device and the AP that can effectively utilize the radio traffic from the AP the measures proposed. The proposed method and the conventional method is improved by simulation to handle the amount of radio traffic from the AP it was confirmed that it is possible to effectively utilize the whole of the radio band.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.4
• /
• pp.11-21
• /
• 2000

The travel behavior should be analysed microscopically for the traffic management of urban street. The car following theory which found out the correlation between the lead and the following vehicles is being widely used as basic data in many fields. As the vehicle position and its speed information can be received by GPS, this technique is recently applying to the various fields. For the case study the travel data were collected with two vehicles equipped with GPS receiver. The moving distance was calculated by the collected location data every 2 seconds and the speed variation was checked. And this study analysed and compared the acceleration and deceleration speed between the lead and the following vehicle. Finally, Regression model about the relationship between the acceleration and deceleration speed and the acceleration and deceleration distance was constructed. This model could be helpful for the road design and the regulation for the safe traffic management.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.820-824
• /
• 2010

The purpose of this study is to develop basic technology of hybrid rocket vehicle by constructed and launched. This small hybrid rocket using HDPE/LN2O and Aluminium steel for its body (weight : 12.5 kg, diameter : 114 mm, height : 1.8 m) was designed. The fuel grain and injector were designed for 50 kgf thrust and burning time 2.5 sec. This rocket was loaded the data acquisition device for obtaining data of pressure and velocity during its flying and equiped an automatic ejector system using spring/motor and timer to collect the rocket more safely after launching. It was launched successfully, but found some problem that the rocket's weight was heavier than expected and the thrust was not enough to reach the designed altitude and analyzed its flight path way.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2786-2791
• /
• 2014

This paper describes the smart illuminating system based on the obstacle environmental presetting to improve the user convenience to easy lighting and energy conservation. Obstacle environment has trouble controlling the illuminating equipment using manual buttons in certain circumstances, which requires a smart remote controller. The smart remote controller is operated by the smart phone, motion sensor and timer to turn on and off the lamps. The event sensor module transmits the signals of the event occurrence to equipment on the remote place when smart phone and motion sensor detect an event, and the illuminator received the event turn on or off the lamp. The system results in energy saving by simple on/off control and manipulating the operating time with controlling the illuminating system preset by user's obstacle or preference circumstances. The proposed system implementation is experimented to figure out the energy saving about13.5w/h and the optimized convenience control.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.4
• /
• pp.313-322
• /
• 2005

In this paper, High power factor electronic ballast using a double resonant Inverter for 250[W] MHD lamp is designed and implemented. Proposed electronic ballast is composed of configuration that is cascaded boost active PFC circuit as power factor corrector and half-bridge double resonant inverter Into two stage approach. Theoretical analysis of circuit and characteristics estimation is generally illustrated by using normalized parameter. To remove the phenomenon of acoustic resonance in the lamp, Simple frequency controller composed timer IC and driving IC is designed and employed on the ballast. The experimental results show that an high power factor electronic ballast using a double resonant inverter is operated stably.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.524-532
• /
• 2012

In this paper, we present the performance evaluation of the reliable cooperative media access control (RCO-MAC) protocol, which has been proposed in [1] by us in order to enhance system throughput in bad wireless channel environments. The performance of this protocol is evaluated with computer simulation as well as mathematical analysis in this paper. The system throughput, two types of average delays, average channel access delay, and average system delay, which includes the queuing delay in the buffer, are used as performance metrics. In addition, two different traffic models are used for performance evaluation: The saturated traffic model for computing system throughput and average channel access delay, and the exponential data generation model for calculating average system delay. The numerical results show that the RCO-MAC protocol proposed by us provides over 20% more system throughput than the relay distributed coordination function (rDCF) scheme. The numerical results show that the RCO-MAC protocol provides a slightly higher average channel access delay over a greater number of source nodes than the rDCF. This is because a greater number of source nodes provide more opportunities for cooperative request to send (CRTS) frame collisions and because the value of the related retransmission timer is greater in the RCO-MAC protocol than in the rDCF protocol. The numerical results also confirm that the RCO-MAC protocol provides better average system delay over the whole gamut of the number of source nodes than the rDCF protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.691-700
• /
• 1994

A power line in not so good in characteristics for communication, because it is a media to transfer the commercial electrical power, and its load noise and high frequency noise are so much. Thus, a simple method to transfer a remote control signal on the power line is studied. The already-existing method is that two signals with upper part eliminated is transmitted every N step. But the method is investigated which the transmitter sends a period signal eliminated in arbitrary phase. Thus the transmission power loss due to elimination of signal can be reduced to the minimum. To implement it, a timer calculating the time from zero-crossing point to the phase is required. The micro-controller, 87C51, precisely calculates the phase using one of two built-in timers. As a result, a remote control signal tramsmitter and receiver using a partially eliminated signal, which is better than the conventional technique using half-eliminated signal in a efficiency of power transmission, is realized, and its characteristics are analyzed.