• Journal of Veterinary Clinics
• /
• v.10 no.2
• /
• pp.221-226
• /
• 1993

To study effective dossage and administration route for scaling, ketamine HCl/propionyl promazine HCl(ketamine) combination and tiletamine HCl/zolazepam HCl(zoletil) were administered in one hundred six dogs. The dogs were toy poodle, Yorkshire Terrier, Pekingese and Chihuahua. Scaling and polishing time, possible treatment time after the first injection of anesthetics, the number of anethesia added, presence of tongue movement during anesthesia, the presence of swaying sign during recovery and respiration were evaluated. The possible treatment time after the first Injection of anesthetic in toy poodle were 26.3${\pm}$3.0 minutes with intravenous(IM) treatment of ketamine 10mg/kg, and 21.4${\pm}$6.6 minutes with intramuscula(IM) treatment of zoletil 8mg/kg, In Yorkshire Terrier were 19.51: 1.7 minutes with IV treatment of ketamine 10mg/kg. 19.0${\pm}$5.2 minutes IM and 20.8${\pm}$6.1 minutes with IM treatment of zoletil 5mg/kg,24.8${\pm}$3,5 minutes with IM treatment of zoletil 8mg/kg. In pekingese were 27.5${\pm}$2.1 minutes with IM treatment of ketamine 10mg/kg,28.0${\pm}$4.2 minutes with IM treatment of zoletil 8mg/kg. In Chihuahua were 19.5${\pm}$1.9 minutes with IV treatment of ketamine 7mg/kg, 17.5${\pm}$1.7 minutes with IM treatment of ketamine 10mg/kg and 20.3${\pm}$3.8 minutes with IM treatment of zoletil 5mg/kg, 21.2${\pm}$5.5 minutes with IM treatment of zoletil 8mg/kg. Swaying sign was observed in all group during recovery time, espically, in toy poodle and Yorkshire Terrier which administered zoletil 8mg/kg IM showed more severe swaying sign. The present results suggested that injection of zoletil 8mg/kg IM might be relatively effective for scaling in Chihuahua Within 20 minutes treatment for scaling in Yorkshire Terrier and Chihuahua, IM treatment of ketamine 7 to 10mg/kg is recommended.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.586-594
• /
• 2014

Maximizing the operating time by reducing the power consumption is important factor to operate sensor network under water networks. For efficient power consumption, dynamic voltage scaling method is available. This method operates low frequency when there is no workload. In case of abundant workload, high frequency operation completes hard work within short time, reducing power consumption. For this reason, complex cryptography should be computed in high frequency. In this paper, we apply dynamic voltage scaling method to cryptography and show performance evaluation. With this result, we can reduce power consumption for cryptography in under water communication.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.842-849
• /
• 2011

The transponder simulator designed to simulate the transponder of military satellite communication systems in the geostationary orbit is required to have time delay function, because of 250 ms delay time, when a radio wave transmits the distance of 36,000 km in free space. But, it is very difficult to develop 250 ms time delay device in the transponder simulator of 100 MHz bandwidth, due to unstable operation of FPGA, loss of memory data for the high speed rate signal processing. Up to date, bandwidth of the time delay device is limited to 45 MHz bandwidth. To solve this problem, we propose the new time delay techniques up to 100 MHz bandwidth without data loss. Proposed techniques are the low speed down scaling and high speed up scaling methods to read and write the external memory, and the matrix structure design of FPGA memory to treat data as high speed rate. We developed the satellite link simulator in 100 MHz bandwidth using the proposed new time delay techniques, implemented to the transponder simulator and verified the function of 265 ms time delay device in 100 MHz bandwidth.

• Structural Engineering and Mechanics
• /
• v.55 no.5
• /
• pp.1055-1086
• /
• 2015

The dynamic response of two-dimensional unbounded domain on the rigid bedrock in the time domain is numerically obtained. It is realized by the modified scaled boundary finite element method (SBFEM) in which the original scaling center is replaced by a scaling line. The formulation bases on expanding dynamic stiffness by using the continued fraction approach. The solution converges rapidly over the whole time range along with the order of the continued fraction increases. In addition, the method is suitable for large scale systems. The numerical method is employed which is a combination of the time domain SBFEM for far field and the finite element method used for near field. By using the continued fraction solution and introducing auxiliary variables, the equation of motion of unbounded domain is built. Applying the spectral shifting technique, the virtual modes of motion equation are eliminated. Standard procedure in structural dynamic is directly applicable for time domain problem. Since the coefficient matrixes of equation are banded and symmetric, the equation can be solved efficiently by using the direct time domain integration method. Numerical examples demonstrate the increased robustness, accuracy and superiority of the proposed method. The suitability of proposed method for time domain simulations of complex systems is also demonstrated.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.421-428
• /
• 2008

The DVS(Dynamic Voltage Scaling) technique is the method to reduce the dynamic energy consumption. As using slack times, it extends the execution time of the big load operations by changing the frequency and the voltage of variable voltage processors. Researches, that controlling the energy consumption of the processors and the data transmission among processors by controlling the bandwidth to reduce the energy consumption of the entire system, have been going on. Since operations in multiprocessor systems have the data dependency between processors, however, the DVS techniques devised for single processors are not suitable to improve the energy efficiency of multiprocessor systems. We propose the new scheduling algorithm based on DVS for increasing energy efficiency of multiprocessor systems. The proposed DVS algorithm can improve the energy efficiency of the entire system because it controls frequency and voltages having the data dependency among processors.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.246-251
• /
• 1998

The basic requirement of a distributed multimedia system are intramedia synchronization which asks the strict delay and jitter for the check period of media buffer and the scaling duration with periodic continuous media such as audio and video media, and intermedia synchronization that needs the constraint for relative time relations among them when several media are presented in parallel. In this paper, a distributed multimedia synchronization algorithm based on the fuzzy logic is presented and the performance is evaluated through simulation. Intramedia synchronisation algorithm uses the media scaling techniques and intermedia synchronization algorithm uses variable service rates on the basis of fuzzy logic to solve the multimedia synchronization problem.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.11
• /
• pp.1363-1370
• /
• 1999

A study of scaling and heat transfer has been carried out for a vertical tube evaporator in which $CaSO_4$ saturated water flows upward. Experimental apparatus including vacuum chambers and heaters has been designed and manufactured to study scaling phenomena for three different pressures(1atm, 0.27atm and 0.16atm). Overall heat transfer coefficients have been measured and shown to decrease with time as scaling proceeds. After the end of experiments, the vertical tube has been cut to measure the thickness of scale at different heights. Below the height where the bulk fluid temperature does not reach saturated temperature, the thickness of scale increases, however, beyond that height occurring saturated condition, the thickness does not vary much or even decreases a little. The measured fouling resistances also support these variations of scale thickness.

• Journal of Korean Society of Transportation
• /
• v.4 no.1
• /
• pp.12-27
• /
• 1986

This study examined user preferences toward transportation modes in Seoul. Two multidimensional scaling models, the ideal point and vector models, were applied to data on mode preferences of 114 adults in the metropolitan area. While both models produced fairly similar results, the vector model performed slightly better than the other in terms of interpretability of the results. The transport attributes elicited are comfort, flexibility, travel cost, travel time, privacy, and safety; among which comfort is salient most. The comfort variable is a multi-faceted attribute in nature. The variations of attribute preferences are most significant between the gender groups as well as worker/nonworker groups. In particular, male workers, female workers and female nonworkers form three distinctive market segments. An unidimensional scaling of the preference data reveals that subway, auto-driver, and subscription bus modes are preferred most, whereas motorcycle and bicycle least. The other modes of express bus, taxt, auto-passenger, bus and walk rank intermediately. An examination of how preference orders vary among modal groups hints that users align their stated attitudes to their choice in order to reduce cognitive dissonance.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.261-264
• /
• 1992

In designing the fuzzy rule-based system, it has effected by the four significant factors such as the choice of membership function, scaling factor, the numbers of fuzzy control rule, the method of defuzzification. In this paper we design the fuzzy rule based system and evaluate by three factors, as followes reaching time, overshoot, and amplitude. And then we wiII show that the significant factors are the choice of scaling factor and the numbers of fuzzy control rule, and the system performance can be improved by the proper selection of the scaling factors.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.265-268
• /
• 1992

The control performances of a fuzzy controller depend on its control rules, I/O membership functions, and scaling factors. Scaling factors are very important to adjust control parameters to the process which is to be controlled. For tuning the sealing factors, trial and error method is used in conventional fuzzy controller, which is very difficult and time consuming. This paper proposes a tuning method of scaling factors based on the concept of tuning rules for the conventional Pl controller parameters. The proposed automatic tuning fuzzy controller was evaluated by computer simulations. Good results have been obtained for the small hydro power plant.