• Journal of applied mathematics & informatics
• /
• 제5권1호
• /
• pp.1-12
• /
• 1998

We consider G/M/1 queues with multiple vacation disci-pline where at the end of every busy period the server stays idle in the system for a period of time called changeover time and then follows a vacation if there is no arrival during the changeover time. The vaca-tion time has a hyperexponential distribution. By using the methods of the shift operator and supplementary variable we explicitly obtain the queue length probabilities at arrival time points and arbitrary time points simultaneously.

• 한국위성정보통신학회논문지
• /
• 제10권4호
• /
• pp.146-150
• /
• 2015

COSPAS-SARSAT 위원회에서는 2000년 이후부터 새롭게 발사되는 미국, EU, 러시아의 중궤도 항법위성에 탐색구조 탑재체를 탑재하여 중궤도 탐색구조(MEOSAR) 서비스를 제공키로 결정하였다. 비컨에서 송출되는 조난신호는 비컨 상공의 각 위성들에 각기 다른 도달시간과 도플러 주파수를 가지고 도달하며, 이를 바로 중궤도 수신국(MEOLUT)으로 전달한다. 중궤도 수신국에서는 적어도 3~4개의 위성을 동시에 추적하여 조난신호를 전달받고, 조난신호 간 TDOA(Time Difference of Arrival)와 FDOA(Frequency Difference of Arrival)를 이용하여 비컨의 위치를 추정한다. 그러나 비컨은 임의의 시간에 50초 간격으로 조난신호를 송출하므로, 대형 조난상황에서 비컨 신호가 겹치는 현상이 나타날 수 있고, 겹쳐진 비컨 신호들을 COSPAS-SARSAT에서 개발하고 있는 현재 방식으로 모든 비컨 위치를 추정하는 것은 어렵다. 따라서 여기에서는 이를 해결하기 위한 방안으로 CAF MAP 알고리즘을 소개하고, COSPAS-SARSAT 시스템의 성능 요구사항을 만족시킬 수 있도록 MCAF MAP 기법을 제안하고, 그 성능을 나타낸다.

• 대한산업공학회지
• /
• 제28권1호
• /
• pp.36-43
• /
• 2002

We analyze bulk service $M/G^{b}/1$ queues using the arrival time approach of Chae et al. (2001). As a result, the decomposition property of the M/G/1 queue with generalized vacations is extended to the $M/G^{b}/1$ queue in which the batch size is exactly a constant b. We also demonstrate that the arrival time approach is useful for relating the time-average queue length PGF to that of the departure time, both for the $M/G^{b}/1$queue in which the batch size is as big as possible but up to the maximum of constant b. The case that the batch size is a random variable is also briefly mentioned.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1297-1301
• /
• 2013

This paper analyzes of PD occurrence position through an analysis of the arrival time difference between the GIS partial discharge signal. Because of GIS (Gas Insulated Switchgear) is a facility very important power equipment and as part of the equipment that make up the power system, the stabilization of the power industry, which accounted for 88.5% share of GIS substation in the form of a substation is an important equipment for power supply. In the situation where we are gradually expanding the need for preventive diagnosis in order to improve the efficiency of equipment management and failure prevention for Preventive diagnosis. In this paper as a method for extracting pre-defect of failure of GIS Apply the average value method of calculating the 5 times each using a pulse of the first time of the second pulse (${\Delta}t$) with an oscilloscope generation position PD(Partial Discharge). the results of GIS internal inspection, the partial discharge of the actual the position of the partial discharge was confirmed with an accuracy of about 82% of positions. Arrival time difference in the most effective manner if the partial discharge of GIS internal occurs by applying the averaging method and TOA(Time of arrival) method, the partial discharge occurs you through the measurement and analysis of PD signal occurs was confirmed in the experiment are presented and diagnostic methods location tracking.

• ETRI Journal
• /
• 제36권3호
• /
• pp.460-468
• /
• 2014

This paper addresses the problem of joint time of arrival (TOA) and direction of arrival (DOA) estimation in impulse radio ultra-wideband systems with a two-antenna receiver and links the joint estimation of TOA and DOA to the sparse representation framework. Exploiting this link, an orthogonal matching pursuit algorithm is used for TOA estimation in the two antennas, and then the DOA parameters are estimated via the difference in the TOAs between the two antennas. The proposed algorithm can work well with a single measurement vector and can pair TOA and DOA parameters. Furthermore, it has better parameter-estimation performance than traditional propagator methods, such as, estimation of signal parameters via rotational invariance techniques algorithms matrix pencil algorithms, and other new joint-estimation schemes, with one single snapshot. The simulation results verify the usefulness of the proposed algorithm.

• ETRI Journal
• /
• 제34권2호
• /
• pp.260-263
• /
• 2012

In this letter, we propose a moving-target tracking algorithm based on a particle filter that uses the time difference of arrival (TDOA)/frequency difference of arrival (FDOA) measurements acquired by distributed sensors. It is shown that the performance of the proposed algorithm, based on the particle filter, outperforms the one based on the extended Kalman filter. The use of both the TDOA and FDOA measurements is shown to be effective in the moving-target tracking. It is proven that the particle filter deals with the nonlinear nature of the movingtarget tracking problem successfully.

• 한국환경과학회지
• /
• 제9권3호
• /
• pp.193-199
• /
• 2000

This study is carried out the analysis of the runoff characteristics for the design of the interior drainage systems by SWMM in urbanization basin. The basin analyzed in this study is Bumuh-chun basin which is located in Susung-gu of Taegu city. Huff method is used for rainfall distribution analysis. The optimal rainfall duration in Bumuh-chun basin is analyzed as about 90 minutes decided from comparison of arrival time and critical duration. Flood flow variation pattern is proposed through the comparison of the results of peak flow and peak time analyzed by SWMM about pre-urbanization and post-urbanization of Bumuh-chun basin. It is known that the variation of arrival time caused by the rapid increase of pavement rate in the upper area shows about 20∼25 minutes faster than pre- urbanization. Therefore, the management of surface water for design of water supply and drainage, and channel alteration has to considered the variation of geological factors according to urbanization.

• International journal of advanced smart convergence
• /
• 제3권2호
• /
• pp.14-17
• /
• 2014

Precision agriculture relies on information technology, whose precondition is providing real-time and accurate information. It depends on various kinds of advanced sensors, such as environmental temperature and humidity, wind speed, light intensity, and other types of sensors. Currently, it is a hot topic how to collect accurate information, the main raw data for agricultural experts, monitored by these sensors timely. Most existing work in WSNs addresses their fundamental challenges, including power supply, limited memory, processing power and communication bandwidth and focuses entirely on their operating system and networking protocol design and implementation. However, it is not easy to find the self-localization capability of wireless sensor networks. Because of constraints on the cost and size of sensors, energy consumption, implementation environment and the deployment of sensors, most sensors do not know their locations. This paper provides maximum likelihood estimators for sensor location estimation when observations are time-of arrival (TOA) range measurement.

• 한국시뮬레이션학회논문지
• /
• 제13권3호
• /
• pp.1-10
• /
• 2004

The cell loss probability required in the ATM network is in the range of 10$^{-9}$ ∼10$^{-12}$ . If Monte Carlo simulation is used to analyze the performance of the ATM node, an enormous amount of computer time is required. To obtain large speed-up factors, importance sampling may be used. Since the Markov-modulated processes have been used to model various high-speed network traffic sources, we consider discrete time single server queueing systems with Markov-modulated arrival processes which can be used to model an ATM node. We apply importance sampling based on the Large Deviation Theory for the performance evaluation of, MMBP/D/1/K, ∑MMBP/D/1/K, and two stage tandem queueing networks with Markov-modulated arrival processes and deterministic service times. The simulation results show that the buffer overflow probabilities obtained by the importance sampling are very close to those obtained by the Monte Carlo simulation and the computer time can be reduced drastically.

• 비파괴검사학회지
• /
• 제26권4호
• /
• pp.231-238
• /
• 2006

위상 배열 초음파 기법을 이용한 국내 표준형 윈전 저압 터빈의 디스크 검사에 대하여 연구하였다. 이를 위하여 디스크 mockup을 제작하고 결함을 가공하였으며 결함에 대한 검출과 길이 측정 방법에 따른 결과를 고찰하였다. 깊이 측정에서 릴은 결함은 AATT(absolute arrival time technique)방법 혹은 RATT (relative arrival time technique)방법을 사용하여 깊이를 측정할 수 있었으나, 조기에 발견하여야 할 깊이가 깊지 않은 결함은 이와 같은 방법으로 깊이를 측정할 수 없었다. 이 경우 결함 신호가 나타나는 각도 범위를 이용하여 결함 깊이를 측정하였으며 유용한 도구임을 확인하였다.