• 한국수자원학회논문집
• /
• 제52권1호
• /
• pp.51-60
• /
• 2019

본 연구에서는 Cosmic-ray 토양수분량 관측시스템 구축 시 필요한 검증 네트워크 설계 기법 개발에 목적을 두고 유전율식(dielectric constant) 장비인 Frequency Domain Reflectometry (FDR)와 연계하여 Cosmic-ray 검증시스템을 구축 운영하였다. Cosmic-ray 검증시스템 평가에 필요한 시범지역은 기존 계측 장비와의 연계성과 다양한 수문자료의 활용성을 고려하여 설마천 유역에 구축하였다. 시범지역은 Cosmic-ray 장비와 FDR 센서(10개소)로 구축하였으며 2018년 7월부터 현재까지 운영되고 있다. 본 연구에서는 검증시스템의 신뢰도를 높이기 위해 코어법(soil core sampling method)을 통해 산출한 용적수분함량(volumetric water content)을 유전율식 장비와 정기적으로 검증하였다. 연구기간 중 수행한 코어법과 FDR 센서를 검증한 결과, 두 자료의 통계량이 $bias=-0.03m^3/m^3$과 $RMSE=0.03m^3/m^3$의 유의한 값을 보였다. 또한 연구기간 동안 FDR 센서의 시계열 특성은 모든 강우에 정상적으로 반응하였다. 그러나 일부 지점에서는 낙엽 및 캐노피의 차단과 상부사면의 유출 등으로 인해 상이한 특성을 보였다. Cosmic-ray 영향원(influence line) 내 FDR 센서의 대표성 분석은 시간 안정성 해석법(temporal stability analysis, TSA)을 이용하여 토심별(10 cm, 20 cm, 30 cm, 40 cm)로 분석하였다. 10개소에 대한 토심별 토양수분량의 대표성을 TSA로 분석한 결과, 토심 10 cm에서는 FDR 5, 토심 20 cm에서는 FDR 8, 토심 30 cm에서는 FDR 2, 토심 40 cm에서는 FDR 1에서 가장 우수한 대표 특성을 보였다. 본 연구의 시범지역 운영 기간이 짧다는 한계는 있지만 지금까지의 분석 결과를 토대로 하여 볼 때, Cosmic-ray 관측시스템 구축 시에는 검증 장비로는 유전율식을 활용하고, Cosmic-ray 영향원 내 토양수분량의 대표성 분석은 TSA 방법으로 수행하는 것이 바람직할 것으로 판단된다.

• 터널과지하공간
• /
• 제19권1호
• /
• pp.19-30
• /
• 2009

비파괴 물리탐사 방법의 일종인 충격반향법 조사는 터널 구조물의 시공 중 품질관리 및 시공 후 구조물의 건전성을 파악하기 위한 안전진단 분야에 널리 사용되고 있다. 충격반향법은 특히 철근콘크리트로 시공된 라이닝에 대하여 라이닝의 두께나 터널 배면 공동 등 내부 상태를 파악하는데 가장 효과적인 비 파괴탐사 방법이다. 본 연구는 현장적용 사례 연구의 일환으로 철근 콘크리트 라이닝의 도로터널, NATM공법으로 시공된 지하철 터널, 재래식 공법으로 시공된 도로터널 등 구조 및 형식이 다른 여러 가지 터널에 대하여 충격반향법 조사를 실시하였다. 충격반향법 탐사 결과를 기존 설계도서, 코어링 자료 및 다른 탐사자료와 대비하였을 때 서로 잘 일치하였고 충격반향법 탐사결과의 신뢰도를 확인할 수 있었으며, 시간-주파수 분석은 구조물 내부 특성에 대한 추정을 보다 용이하게 하였다. 1차원적인 한 지점에서의 수직하부 정보를 구하는 통상적인 주파수 영역에서의 충격반향법 자료해석과 더불어 2차원적인 심도단면도를 구하는 탐사법 적용은 구조물을 보다 정확하게 영상화할 수 있기 때문에 구조물 내부에 대한 신뢰도 높은 정보 파악이 가능하였다.

• Ocean Systems Engineering
• /
• 제2권2호
• /
• pp.115-135
• /
• 2012

The very low natural frequencies of tension leg platforms (TLP's) have raised the concern about the significance of the action of hydrodynamic wave forces on the response of such platforms. In this paper, a numerical study using modified Morison equation was carried out in the time domain to investigate the influence of nonlinearities due to hydrodynamic forces and the coupling effect between surge, sway, heave, roll, pitch and yaw degrees of freedom on the dynamic behavior of TLP's. The stiffness of the TLP was derived from a combination of hydrostatic restoring forces and restoring forces due to cables and the nonlinear equations of motion were solved utilizing Newmark's beta integration scheme. The effect of wave characteristics such as wave period and wave height on the response of TLP's was evaluated. Only uni-directional waves in the surge direction was considered in the analysis. It was found that coupling between various degrees of freedom has insignificant effect on the displacement responses. Moreover, for short wave periods (i.e., less than 10 sec.), the surge response consisted of small amplitude oscillations about a displaced position that is significantly dependent on the wave height; whereas for longer wave periods, the surge response showed high amplitude oscillations about its original position. Also, for short wave periods, a higher mode contribution to the pitch response accompanied by period doubling appeared to take place. For long wave periods, (12.5 and 15 sec.), this higher mode contribution vanished after very few cycles.

• Ocean Systems Engineering
• /
• 제4권4호
• /
• pp.327-342
• /
• 2014

The tension leg platform (TLP) is one of the compliant structures which are generally used for deep water oil exploration. With respect to the horizontal degrees of freedom, it behaves like a floating structure moored by vertical tethers which are pretension due to the excess buoyancy of the platform, whereas with respect to the vertical degrees of freedom, it is stiff and resembles a fixed structure and is not allowed to float freely. In the current study, a numerical study for square TLP using modified Morison equation was carried out in the time domain with water particle kinematics using Airy's linear wave theory to investigate the effect of changing the tether tension force on the stiffness matrix of TLP's, the dynamic behavior of TLP's; and on the fatigue stresses in the cables. The effect was investigated for different parameters of the hydrodynamic forces such as wave periods, and wave heights. The numerical study takes into consideration the effect of coupling between various degrees of freedom. The stiffness of the TLP was derived from a combination of hydrostatic restoring forces and restoring forces due to cables. Nonlinear equation was solved using Newmark's beta integration method. Only uni-directional waves in the surge direction was considered in the analysis. It was found that for short wave periods (i.e., 10 sec.), the surge response consisted of small amplitude oscillations about a displaced position that is significantly dependent on tether tension force, wave height; whereas for longer wave periods, the surge response showed high amplitude oscillations that is significantly dependent on wave height, and that special attention should be given to tethers fatigue because of their high tensile static and dynamic stress.

• 분석과학
• /
• 제28권3호
• /
• pp.187-195
• /
• 2015

승화열은 대기 유기 오염물질의 확산에 관련된 환경적인 문제를 해결하거나, 위험한 화학 물질의 위해성을 평가하는 데에 중요한 변수이다. 하지만 실험적으로 승화열을 측정하려면 많은 시간과 비용이 소모 되며, 그 실험자체도 복잡하고 위험하다. 따라서 본 연구에서는 유기화합물의 승화열을 간단하게 예측하는 모델을 개발하기 위하여 정량적 구조-물성 상관관계 연구를 이용하였다. 군기반 전진선택방법을 적용하여 다중선형회귀방법과 서포트 벡터 머신과 같은 학습방법에 적합한 분자표현자들을 선택하도록 하였다. 개별 모델과 복합모델들은 부스트래핑 방법과 y-임의추출법에 의해 내부검증이 되었다. 외부 테스트 데이터의 예측 성능은 적용범위를 고려하므로서 개선되었다. 다중선형회귀모델에 따르면, 승화열은 분자간의 분산력, 수소결합, 정전기적 상호작용, 쌍극자-쌍극자 상호작용과 관련이 있는 것을 나타낼 수 있었다.

• 디지털융복합연구
• /
• 제10권9호
• /
• pp.123-136
• /
• 2012

인터넷의 발전으로 웹 어플리케이션은 널리 사용되고 있지만, 웹 기반 정보시스템 구축을 위한 별도의 감리지침은 없는 상태이다. 정보화사업은 매우 다양한 특성을 포함하고 있기 때문에 웹 기반 정보시스템에 대한 감리모델이 필요하다. 따라서, 웹 기반 정보시스템에서 감리 효과를 높이고 품질강화를 위하여 웹기반 정보시스템 감리모형을 제안하였다. 감리점검항목은 기존 정보시스템 감리점검 프레임워크의 3대축을 준용하여 감리시점으로는 분석, 설계, 구현으로 정의하고, 감리영역은 컨텐츠, 디자인, 프로세스로, 감리관점 점검기준은 절차, 산출물, 성과를 기준으로 정의하였다. 또한 정보시스템 개발 방법론의 기존모델과 웹 기반 정보시스템 차이를 제시하고 웹기반 정보시스템 감리를 위한 감리영역별로 감리점검항목을 도출하였다. 도출된 감리점검항목을 설문조사를 통해 적합성을 검증하였고 도출된 감리점검항목을 적용시킨 개선된 감리점검모형을 제안하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.523-526
• /
• 2002

The crosstalk among coupled microstrip lines is the major limiting factors of signal qualities in the high-speed digital and communication equipment. In this paper, a three-dimensional finite difference time domain (FDTD) method is applied to analyze the crosstalk between the coupled microstrip lines. The proposed structures of the coupled microstrip lines are investigated to reduce the coupling in a simple way by modifying their ground plane with an optimum gap. The examples of these structures with the different sizes of the gaps on their ground plane are studied. These structures are considered as the four-port network to evaluate transmission efficiency, near- and far-end crosstalk. Gaussian pulse is excited to evaluate the frequency characteristics from dc to 30 ㎓. The transmission efficiency, near- and far-end crosstalk of each structure of the coupled microstrip lines are demonstrated. The numerical results of this study show that the majority of crosstalk is the far-end crosstalk. The usage of the optimum gap on the ground plane can reduce the far-end crosstalk of the coupled microstrip lines while the transmission efficiency is nearly equal.

• 시스템엔지니어링학술지
• /
• 제15권2호
• /
• pp.66-71
• /
• 2019

In digital pathology, an electronic system in the biomedical domain storage of the files is a big constrain and because all the analysis and annotation takes place at every user-end manually, it becomes even harder to manage the data that is being shared inside an enterprise. Therefore, we need such a storage system which is not only big enough to store all the data but also manage it and making communication of that data much easier without losing its true from. A virtual server setup is one of those techniques which can solve this issue. We set a main server which is the main storage for all the virtual machines(that are being used at user-end) and that main server is controlled through a hypervisor so that if we want to make changes in storage overall or the main server in itself, it could be reached remotely from anywhere by just using the server's IP address. The server in our case includes XML-RPC based API which are transmitted between computers using HTTP protocol. JAVA API connects to HTTP/HTTPS protocol through JAVA Runtime Environment and exists on top of other SDK web services for the productivity boost of the running application. To manage the server easily, we use Tkinter library to develop the GUI and pmw magawidgets library which is also utilized through Tkinter. For managing, monitoring and performing operations on virtual machines, we use Python binding to XML-RPC based API. After all these settings, we approach to make the system user friendly by making GUI of the main server. Using that GUI, user can perform administrative functions like restart, suspend or resume a virtual machine. They can also logon to the slave host of the pool in case of emergency and if needed, they can also filter virtual machine by the host. Network monitoring can be performed on multiple virtual machines at same time in order to detect any loss of network connectivity.

• Steel and Composite Structures
• /
• 제35권5호
• /
• pp.671-685
• /
• 2020

This manuscript presents impacts of gradation of material functions and axial load functions on critical buckling loads and mode shapes of functionally graded (FG) thin and thick beams by using higher order shear deformation theory, for the first time. Volume fractions of metal and ceramic materials are assumed to be distributed through a beam thickness by both sigmoid law and symmetric power functions. Ceramic-metal-ceramic (CMC) and metal-ceramic-metal (MCM) symmetric distributions are proposed relative to mid-plane of the beam structure. The axial compressive load is depicted by constant, linear, and parabolic continuous functions through the axial direction. The equilibrium governing equations are derived by using Hamilton's principles. Numerical differential quadrature method (DQM) is developed to discretize the spatial domain and covert the governing variable coefficients differential equations and boundary conditions to system of algebraic equations. Algebraic equations are formed as a generalized matrix eigenvalue problem, that will be solved to get eigenvalues (buckling loads) and eigenvectors (mode shapes). The proposed model is verified with respectable published work. Numerical results depict influences of gradation function, gradation parameter, axial load function, slenderness ratio and boundary conditions on critical buckling loads and mode-shapes of FG beam structure. It is found that gradation types have different effects on the critical buckling. The proposed model can be effective in analysis and design of structure beam element subject to distributed axial compressive load, such as, spacecraft, nuclear structure, and naval structure.

• Smart Structures and Systems
• /
• 제15권2호
• /
• pp.245-258
• /
• 2015

A methodology based on distributed fiber optic sensors is proposed to detect the lateral buckling for subsea pipelines in this study. Uncontrolled buckling may lead to serious consequences for the structural integrity of a pipeline. A simple solution to this problem is to control the formation of lateral buckles among the pipeline. This firms the importance of monitoring the occurrence and evolution of pipeline buckling during the installation stage and long-term service cycle. This study reports the experimental investigations on a method for distributed detection of lateral buckling in subsea pipelines with Brillouin fiber optic sensor. The sensing scheme possesses the capability for monitoring the pipeline over the entire structure. The longitudinal strains are monitored by mounting the Brillouin optical time domain analysis (BOTDA) distributed sensors on the outer surface of the pipeline. Then the bending-induced strain is extracted to detect the occurrence and evolution of lateral buckling. Feasibility of the method was validated by using an experimental program on a small scale model pipe. The results demonstrate that the proposed approach is able to detect, in a distributed manner, the onset and progress of lateral buckling in pipelines. The methodology developed in this study provides a promising tool for assessing the structural integrity of subsea pipelines.