• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.193-200
• /
• 2022

In this study, the finite-failure NHPP software reliability model was applied to the software development model based on the Weibull lifetime distribution (Goel-Okumoto, Rayleigh, Type-2 Gumbe), which is widely used in the software reliability field, and then the cost attributes were compared and evaluated. For this study, failure time data detected during normal operation of the software system were collected and used, the most-likelihood estimation (MLE) method was applied to the parameter estimation of the proposed model, and the calculation of the nonlinear equation was solved using the binary method. As a result, first, in the software development model, when the cost of testing per unit time and the cost of removing a single defect increased, the cost increased but the release time did not change, and when the cost of repairing failures detected during normal system operation increased, the cost increased and the release time was also delayed. Second, as a result of comprehensive comparative analysis of the proposed models, it was found that the Type-2 Gumble model was the most efficient model because the development cost was lower and the release time point was relatively faster than the Rayleigh model and the Goel-Okumoto basic model. Third, through this study, the development cost properties of the Weibull distribution model were newly evaluated, and the analyzed data is expected to be utilized as design data that enables software developers to explore the attributes of development cost and release time.

• Korean Journal of Veterinary Service
• /
• v.42 no.4
• /
• pp.265-274
• /
• 2019

Delayed arrival of blood samples from the field and a large number of samples delivered often causes delay in sample analysis leading to inaccurate measurements. Therefore, this study aimed to assess whether prolonged storage in refrigerator could influence the stability of cattle blood samples and to establish an optimal time limit for complete blood count (CBC) parameters and blood gas and electrolyte (BGE) parameters analyses. Samples collected from healthy cows were tested immediately for CBC and BGE using automated hematology, blood gas and electrolyte analyzers. Samples were kept in refrigerator at 4℃ and analyzed after 6 h, 12 h, 24 h, 48 h, 72 h, 120 h, and 192 h of storage. Mean differences between observations were assessed at 5% significance level using ANOVA and Duncan's multiple range test. Total CBC parameters and the platelet profile remained stable for 192 h, except for MCHC. Among leukocyte-related counts, NEU and EOS remained stable for 192 hours. WBC and LYM, and MONO values produced inconsistent measurements which recovered its initial measurement after 12 h and 24 h of storage, respectively, then remained stable until 120 h. Among the blood gas indices, PCO₂, PO₂, tCO₂, and BE showed declining and significant changes over time, but pH, tHb, and SO₂ remained stable for 192 h. Electrolyte status in the blood showed that ions are unstable and tend to change in as early as 6 h of storage. This study established that cattle blood specimens for CBC analysis can be stored for 120 h at 4℃, but specimens for BGE analyses must be tested within 6 to 24 h.

• Journal of the military operations research society of Korea
• /
• v.30 no.1
• /
• pp.107-134
• /
• 2004

Today's Internet is providing a single service which is so-called "best-effort service". Now, multimedia and real-time applications are not only demanding large bandwidth but also requiring high QoS. For this, MPLS and DiffServ technology can be adopted to support more scalability and QoS for data traffic engineering. The DISN(Defense Information Systems Network) supports CBR service for voice traffic and VBR service for data traffic which is best-effort service. We propose how to adopt MPLS and DiffServ technology to support traffic engineering and guarantee QoS in the DISN. A traffic analysis according to prioritized traffic classes is done using OPNET simulation tool for assuring QoS. The result shows that low priority packets are delayed a little bit, but high priority packets are transferred more efficiently than without traffic engineering.gineering.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.35 no.3
• /
• pp.45-58
• /
• 2010

Due to rapid developments of IT technologies, convergence services like IPTV (Internet protocol television) are shown up. Even though expert and customer had great expectations for this innovative service, commercialization was delayed for years by the legal dispute between industry players. One of the biggest problems was that whether internet backbone providers have to share their internet network backbone with IPTV service providers (which don't have network backbone) or not. As other countries, Korean government set the rules that ISP have to offer indiscriminate access to other IPTV service provider. At the same time, internet backbone providers can charge access charge based on cost by way of compensation. Thus access charge is very critical to the IPTV industry players. The objective of this paper is to provide model that can calculate the reasonable access charge by system dynamics, based upon real data in Korean telecommunication industry.

• Journal of the Korean Magnetic Resonance Society
• /
• v.15 no.2
• /
• pp.104-114
• /
• 2011

Rapid exchange and hydrolysis of the tubulin-bound guanine nucleotides have been known to govern the dynamics of microtubules. However, the instability and low concentration have made it difficult for the microtubule-bound GTP to be observed directly. In this study, we circumvent these problems by lyophilization and using cross-polarization techniques. $^{31}P$ NMR signals were detected from the tubulin-bound GTP in microtubules for the first time. Analysis of the $^{31}P$ CPMAS NMR spectrum indicates that GTP hydrolysis was delayed by the presence of taxol.

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.2
• /
• pp.98-103
• /
• 2000

This paper is concerned with a delay-dependent sliding mode scheme for the robust stabilization of input-delay systems with bounded unknown uncertainties. A sliding surface based ona predictor is proposed to minimize the effect of the input delay. Then, a robust control law is derived to ensure the existence of a sliding mode on the surface. In input-delay systems, uncertainties given during te delayed time are not directly controlled by the switching control because of causality prolem of them. They can influence the stability of the system in the sliding mode. Hence, a delay-dependent stability analysis for reduced order dynamics is employed to estimate maximum delay bound such that the system is globally asymptotically stable in the sliding mode. A numerical example is given to illustrate the design procedure.

• Journal of Mechanical Science and Technology
• /
• v.20 no.3
• /
• pp.310-318
• /
• 2006

In this study, we investigate the feasibility of in-situ crack propagation by using a double cleavage drilled compression (DCDC) specimen showing a slow crack velocity down to 0.03 mm/s under 0.01 mm/s of displacement control. Finite element analysis predicted that the DCDC specimens would show at least 4.3 fold delayed crack initiation time than conventional tensile fracture specimens under a constant loading speed. Using DCDC specimens, we were able to observe the in-situ crack propagation process in a particle reinforced transparent polymer composite. Our results confirmed that the DCDC specimen would be a good candidate for the in-situ observation of the behavior of particle reinforced composites with slow crack velocity, such as the self-healing process of micro-particle reinforced composites.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.4
• /
• pp.193-198
• /
• 2011

Effect of CaO addition on age hardening response has been studied by using optical microscopy, scanning electron microscopy and differential thermal analysis in AZ91 and CaO-containing ECO-AZ91 alloys. After solution treatment, the ${\beta}$($Mg_{17}Al_{12}$) phase formed during solidification mostly disappeared in the microstructure in the AZ91 alloy, whereas numerous ${\beta}$ precipitates containing Ca were still observed in the ECO-AZ91 alloy due to its enhanced thermal stability. The ECO-AZ91 alloy showed the delayed peak aging time and higher peak hardness compared with those of the AZ91 alloy. The activation energies for ${\beta}$ precipitation calculated by means of Kissinger method increased from 71.4 to 85.6 kJ/mole by the addition of CaO, which implies that CaO plays a role in reducing ${\beta}$ precipitation rate in the AZ91 alloy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.889-892
• /
• 2013

본 논문에서는 급성 복증을 주소로 야간 응급실 내원 시 영상의학과 전문의 부재 등과 관련된, 급성 충수 돌기염 진단을 위한 복부 초음파 검사의 환자 대기 시간과 충수 돌기 절제술 시행까지 환자 대기 시간을 분석한다. 응급실 내원 환자 41.5%에서 초음파 검사 대기 시간은 10시간 이상으로 나타났고, 외래 내원 환자의 45.2%는 수술 대기 시간이 18시간 이상으로 나왔다. 이는 초음파 검사의 대기 시간이 수술 대기 시간에 영향을 미치는 것으로 카이제곱검증에서 유의하게 나왔다(p<0.05). 따라서 본 논문에서는 환자들의 대기 시간을 감소시키기 위한 방법으로 응급실 의료진의 초음파 검사 시행에 따른 유익성과 급성 충수 돌기염의 특징을 이용한 의료 영상 분석, 연구의 필요성을 제안한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.689-694
• /
• 2003

An iterative modal analysis approach is developed to determine the effect of transverse open cracks on the dynamic behavior of simply supported pipe conveying fluid subject to the moving mass. The equation of motion is derived by using Lagrange's equation. The influences of the velocity of moving mass and the velocity of fluid flow and a crack have been studied on the dynamic behavior of a simply supported pipe system by numerical method. The presence of crack results in higher deflections of pipe. The crack section is represented by a local flexibility matrix connecting two undamaged beam segments i.e. the crack is modelled as a rotational spring. Totally, as the velocity of fluid flow and the crack severity are increased, the mid-span deflection of simply supported pipe conveying fluid is increased. The time which produce the maximum dynamic deflection of the simply supported pipe is delayed according to the increment of the crack severity.