• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.229-234
• /
• 2015

Depending on the living styles, the types of energy consumed by households have changed, and the consumption has increased rapidly. Consequently, those have led to environmental issues, such as exhaustion of energy and the climate changes. As one of solutions to such issues, energy efficiency can be approached. Therefore, in this study, the gas water heater(115S type Rheem products) that made in Germany and obtain hot water using gas as a heat source is selected. a $1.0m^3$ water tank with a 6kW electronic heater is installed and a water temperature and pressure is maintain constantly also thermometer is injected. Two of gas meter, one of pressure regulator and three of time measurement devices are installed in a combustion facility and fuelling facility with a magnet valve so it can observe and record combustion reactions. Quantity of hot water that heated by boiler is recorded using a quantity measurement tank, and have been heated by the boiler have been to record and measure the amount and utilized the data acquired through measurement of all factors that are applied to acquire hot water in order to calculate the use rate of final energy. In conclusion, this researcher drew the economic strong points of the hot water generated by gas.

• The Journal of Internal Korean Medicine
• /
• v.41 no.2
• /
• pp.248-255
• /
• 2020

Objectives: Fatigue, malnutrition, and weight loss are common complaints after undergoing surgery for cancer. These symptoms can be associated with Yin-Deficiency (陰虛) of Exhaustion syndrome (虛勞). Therefore, this study aimed to determine if it is possible to use Dokhwaljihwang-tang, which originates from Yukmijihwang-tang, for enhanced recovery after cancer surgery. Methods: After cancer surgery, Dokhwaljihwang-tang-gami was administered three times a day, in 80-120 ml doses at a time. Results: In four cases of gastric, colorectal, and thyroid cancer, enhanced recovery was achieved using Dokhwaljihwang-tang-gami to treat general weakness, fatigue, and pain in the surgical site after cancer surgery. Conclusions: Dokhwaljihwang-tang can be used for enhanced recovery after cancer surgery.

• Industrial Engineering and Management Systems
• /
• v.8 no.1
• /
• pp.66-71
• /
• 2009

This study proposes a new framework for designing disassembly methods. In recent years, environmental problems have become global issues. Recycling of used products or resources is recognized as a matter of significance since it may help reduce the risk of exhausting natural resources. Considering possible exhaustion of limited natural resources in the near future, reuse of products would gain more environmental significance. As yet, it relies hugely on manual disassembly, which labor cost places burden on the total recycling cost. The purpose of this study is to propose a methodology designing for manual disassembly works, and a creation method of a jig. By focusing on parts' connection and attachment relationship, parts are categorized in 5 categories (parent part, joint key part, attaching key part, child part, and independent part) according to the features that parts possess, and 3 kinds of connection relationships (parent part-joint key part connection, parent part-independent part connection and child part-child part connection) are clarified. Connection relationship and attachment relationship charts have also been created, and utilizing them, disassembly orders are settled, and a disassembly jig is devised. The proposed methodology is also applied to a real product and its work time is improved 42% form 31 to 13 seconds.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.5
• /
• pp.534-548
• /
• 2012

This study investigates the emotional labor of fast fashion sales personnel using the qualitative research method. The research was performed through an in-depth interview with 10 sales personnel (managers, coordinators, head cashiers, and sales associates) who experienced fast fashion brands from July to October in 2011. The results of this study provide that fast fashion brands do have specific feeling rules and display behavior. Even though the sales personnel spend an extremely short time (about 1 minute) to serve customers, most of them experience exhaustion, fatigue, burnout and self-alienation because of emotional dissonance. Sales personnel do deep-acting and surface acting simultaneously and interviewees who have longer and more sales experience express less emotional dissonance. To reduce the negative results of emotional labor, the company plays an important role through the organizational culture; in addition, deep-acting could be recommended for a beginner until they are comfortable with sales. The results of this study provide the elements of emotional labor in a fast fashion and practical suggestions for store operation and sales personnel training.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.616-624
• /
• 2003

The exhaustion of our water resource due to the leakage of waterworks renders it urgent to detect water leakage effectively. In the paper, the detection of water leakage makes use of a pound-penetrating radar(GPR). The region of water leakage is implemented by an acryl box filled with methanol, and then the scale-down experiments are performed by using the GPR system developed in our laboratory. The validity of GPR experiments is assured by showing that the measured data agree well with those finite-difference time-domain(FDTD) simulated results in the same situation. The feasibility of GPR system for the detection of water leakage is investigated by displaying B-scan images according to the distribution of water leakage.

• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.14-20
• /
• 2010

Squid ink was purified to melanin powder by repeated treatments with aqueous sodium hydroxide and acetic acid solutions. The exhaustion dyeing conditions of melanin to wool fabrics were investigated in relation with pH, melanin concentration, dyeing temperature and time. The melanin was dyeable to cotton and wool fabrics but higher dyeability of the wool was observed. A K/S of 7 was obtained on the optimally dyed wool fabrics with 5 % owf melanin under pH 4 at $100^{\circ}C$ for 60 minutes. Color fastness to both washing and rubbing was excellent and color fastness to light was also very good probably due to the polymeric nature of the extracted sepia melanin.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.175-182
• /
• 2016

To investigate dyeing behaviors in accordance with dye structure in cold pad batch dyeing of cotton knit, monochlorotriazine-vinylsulfone bifunctional dyes and monofluorotriazine-vinylsulfone bifunctional dyes were prepared. The spectral property and solubility of the dyes were tested and compared with the imported dyes. In addition, exhaustion behaviors of individual and mixed dye solutions were measured to examine the influence of dye structure on dyeing behavior in cold pad batch dyeing. The substantivity, fixation, migration index and half dyeing time were also calculated for further analysis of dyeing behavior of the prepared dyes. As a result, both dyes exhibited the superior solubilities and satisfactory light absorption properties. Also, monofluorotriazine-vinylsulfone bifunctional dyes showed moderate sensitivity to alkalinity and proper kinetic index values compared with the monochlorotriazine-vinylsulfone bifunctional dyes and the imported dyes. The results indicated monofluorotriazine-vinylsulfone bifunctional structure of the dye is suitable for cold pad batch dyeing.

• Journal of the Korean Magnetic Resonance Society
• /
• v.15 no.2
• /
• pp.115-127
• /
• 2011

A newly developed cost-effective approach to prepare $^{15}N/^{13}C$-labeled protein for NMR studies is presented. This method has been successfully applied to isotopically labeling of PTK6 SH2 domain and MTH 1880 protein. The production method generates cell density using a growing media containing $^{15}NH_4Cl$, $^{12}C_6$-D-glucose. Following a doubling time period for unlabeled metabolite exhaustion and then addition $^{13}C_6$-D-glucose into a M9 growing media, the cells are induced. Our results demonstrate that in order to get full incorporation of $^{13}C$, the isotopes are not totally required during the initial growth phase before induction. The addition of small amounts of $^{13}C_6$-D-glucose to the induction phase is sufficient to obtain more than 95% incorporation of isotopes into the protein. Our optimized protocol is two-thirds less costly than the classical method using $^{13}C$ isotope during the entire growth phase.

• Asian Journal of Business Environment
• /
• v.8 no.3
• /
• pp.13-21
• /
• 2018

Purpose - This study examined workplace bullying as a situational antecedent of workaholism and burnout as a consequence of workaholism and explored the mediating role of workaholism and the moderation effect of perceived organizational support. Research design, data, and methodology - This study collected data from 319 employees in South Korean companies through a survey method. Results - First, job-related bullying promotes a compulsive and excessive drive to work. However, person-related bullying was positively related to the tendency to work excessively hard. Second, only working excessively shows positive relationship with only exhaustion excepting cynicism. Third, although bullied employees may reserve their personal resources through workaholism in short time, it drives them to be workaholic, which leads them exhausted in turn. Finally, perceived organizational support decreases the effect of job-related bulling on both of working compulsively and working excessively. Conclusions - First, this study suggests workplace bullying as a situational antecedent and verify burnout as a consequence of workaholism. Second, it investigate the mediating role of workaholism and the moderation effect of perceived organizational support. Practically, When they find workaholic employees, they should investigate if workplace bullying exists through face-to-face talk. If necessary, they should decide personal transfer to the other department or work team.

• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.424-432
• /
• 2004

The handling and transport of broiler birds from farm to the processing factory is known to cause injury and dead. The preslaughter period can be compromised through thermal stress, emotional stress, starvation, dehydration, metabolic exhaustion, trauma to the skin and bone fraction resulting in bruising and dead. This paper focuses on the control points of individual post Harvest stages by reference to recent literature. In catching, the injuries and deads are caused from fracture of bone, skin damage and hipbone dislocation. It can be improved by training the catchers. The primary factor of dead during transportation is from thermal stress. It is related to stocking density, type of crate and vehicle, ventilation and transportation time. Of the factors, the ventilation is very important. The holding place should be built with consideration of protection from the hostile external environment. There were not much progresses in this area, however, many researches are conducting to focus on animal welfare in European Union. Recently, it is rapidly changed in marketing custom from whole carcass to portion cut in Korea. This means the increase of economic loss due to the mishandling at post harvest. The systematic approach is demanded for this area.