• 제목/요약/키워드: Time of Gas Emission

검색결과 453건 처리시간 0.03초

물/부동액-기반Al2O3나노유체를 이용한 차량용 냉각시스템 성능 향상에 관한 실험적 연구 (Experimental Investigation on the Thermal Performance Enhancement of Cooling System for Vehicles using Water/Coolant-Based Al2O3 Nanofluids)

  • 박용준;김현진;이승현;최태종;강예준;장석필
    • 한국분무공학회지
    • /
    • 제20권2호
    • /
    • pp.65-69
    • /
    • 2015
  • In this study, the thermal performance of vehicle's cooling system is experimentally investigated using the water/coolant-based $Al_2O_3$ nanofluids as working fluids. For the purpose, the water/coolant-based $Al_2O_3$ nanofluids are prepared by twostep method with gum arabic. In order to obtain the well-suspended nanofluids, the agglomerated $Al_2O_3$ nanoparticles are precipitated using centrifugal force and the experiments are performed with supernatant of them. The thermal conductivity is measured by transient hot wire method and the thermal conductivity of nanofluids is enhanced up to 4.8% as compared to that of base fluids. Moreover, the cooling performance of water/coolant-based $Al_2O_3$ nanofluids is evaluated using vehicle's engine simulator under the constant RPM condition. The results show that the cooling performance of automobile engine increases up to 5.9% using prepared nanofluids. To investigate the effect of nanofluids on exhaust gas, the $NO_x$ emission is measured during the operation with respect to time and 10.3% of $NO_x$ emission is decreased. The experimental results imply that the water/coolant-based $Al_2O_3$ nanofluids might be used as a next-generation vehicles' coolant

낙동강 유역 환경유량에 대한 기후변화의 영향 분석 (An Analysis of the Effect of Climate Change on Nakdong River Environmental Flow)

  • 이아연;김상단
    • 한국물환경학회지
    • /
    • 제27권3호
    • /
    • pp.273-285
    • /
    • 2011
  • This study describes the modeling of climate change impact on runoff across southeast Korea using a conceptual rainfall-runoff model TANK and assesses the results using the concept of environmental flows developed by International Water Management Institute. The future climate time series is obtained by scaling the historical series, informed by 4 global climate models and 3 greenhouse gas emission scenarios, to reflect a $4.0^{\circ}C$ increase at most in average surface air temperature and 31.7% increase at most in annual precipitation, using the spatio-temporal changing factor method that considers changes in the future mean seasonal rainfall and potential evapotranspiration as well as in the daily rainfall distribution. Although the simulation results from different global circulation models and greenhouse emission scenarios indicate different responses in flows to the climate change, the majority of the modeling results show that there will be more runoff in southeast Korea in the future. However, there is substantial uncertainty, with the results ranging from a 5.82% decrease to a 48.15% increase in the mean annual runoff averaged across the study area according to the corresponding climate change scenarios. We then assess the hydrologic perturbations based on the comparison between present and future flow duration curves suggested by IMWI. As a result, the effect of hydrologic perturbation on aquatic ecosystems may be significant at several locations of the Nakdong river main stream in dry season.

시설재배지(施設栽培地)에서 축분퇴비(畜糞堆肥) 시용시(施用時) 보충비종(補充費種)에 따른 토양배출(土壤排出)가스 및 미생물다양성(微生物多樣性)의 변화(變化) (Changes of Soil-Emission Gases and Microbial Diversity by Different Fertilizers Supplemented after Application of Livestock-Manure Compost in Greenhouse Soil)

  • 강항원;고지연;박향미;이재생;강위금;박경배
    • 한국토양비료학회지
    • /
    • 제33권1호
    • /
    • pp.52-60
    • /
    • 2000
  • 축분퇴비의 시용시 보충하는 비종에 따른 하우스 내부의 가스 발생양상과 미생물의 다양성을 구명하여 가스피해 정감 및 토양건전성 유지를 위한 기초자료를 얻고자 식양질 하우스토양에 축분퇴비의 시용량을 고추의 기준시비량과 퇴비에 함유된 인산함량을 기준하여 정식 2주전에 시용하고 부족한 질소성분을 요소와 완효성U/F복비로 보충처리하여 4월부터 8일 까지 재배하였다. 암모니아 및 아민류 가스는 정식초기에는 다소 낮은 농도로 배출되다가 정식 후 27일경에 peak를 보인 후 급격히 감소하여 33일경 이후에는 검출되지 않았으며, 평균농도는 요소구에 비하여 완효성U/F복비구가 암모니아 42%, 아민류 85%감소되었다. 이산화탄소는 요소구 1,200~3,200, 완효성U/F복비구 $900{\sim}2,650mg\;{\ell}^-$의 범위로 배출되었고, 평균농도는 요소구 2,260, 완효성U/F복비구 $1,590mg\;{\ell}^-$이었다. 세균, 방선균, B/F비, A/F비, 암모니아 및 아질산산화세균, 질산환원균 등의 밀도는 재배기간이 경과됨에 따라 완효성U/F복비구에서 더 높았으나 사상균 수는 요소구에서 많았고 탈질균은 비슷한 경향을 보였다. 조사한 6종 미생물 밀도의 백분율을 이용한 다양성지수는 0.10~0.35 범위로 재배기간이 경과함에 따라 감소하는 경향이었으며, 처리간에는 완효성U/F복비구가 요소구에 비하여 더 높았다.

  • PDF

고분자 분리막을 이용하여 $SF_6/N_2$ 혼합 기체에서 $SF_6$ 분리 (Separation of $SF_6$ from $SF_6/N_2$ Mixtures Using Polymeric Membranes)

  • 고영덕;이형근;홍성욱
    • 멤브레인
    • /
    • 제22권1호
    • /
    • pp.72-76
    • /
    • 2012
  • 육불화황($SF_6$)은 매우 큰 지구 온난화 효과를 가진다. 따라서, $SF_6/N_2$의 사용을 줄이고 이것을 대기 중으로 방출하는 것을 억제하기 위한 노력이 있어 왔다. 전기 기구에서 $SF_6$의 사용량을 줄이는 한 가지 방법은 $SF_6/N_2$ 혼합 기체를 사용하는 것이다. 혼합 기체에서 $SF_6$의 농도는 10~60%까지 변화가 가능하다. 그러나, 기구를 분해하거나 수리할 경우에 혼합기체에서 $SF_6$를 회수하여야 한다. $SF_6$의 끓는점이 $-60^{\circ}C$ 정도로 매우 낮으므로 액화법은 적용하기가 어렵다. 한 가지 가능한 대안은 분리막을 사용하는 것이다. 본 연구에서는 5가지 고분자에 대해서 육불화황과 질소의 투과 성질에 대해서 조사하였다. 예를 들면 $25^{\circ}C$에서 이축연신 폴리프로필렌(BOPP)에 대한 질소의 투과도는 0.19 barrer인 반면에 육불화황의 투과도는 0.0012 barrer로써 선택도는 158이었다. $SF_6/N_2$ 혼합기체에 대한 upper bound가 처음으로 제안되었는데 n = -1.33 and k = 160 (barrer)이었다.

셰일 저류층 내 공극 구조 연구를 위한 표면 밀링 (Surface Milling for the Study of Pore Structure in Shale Reservoirs)

  • 박선영;최지영;이현석
    • 광물과 암석
    • /
    • 제33권4호
    • /
    • pp.419-426
    • /
    • 2020
  • 비전통 저류층에서 에너지 자원의 회수율을 높이기 위해서는 저류층 내의 미세 공극 형태와 연결도 등을 포함하는 공극 구조 연구가 필수적이다. 본 연구에서는 셰일 저류층 내 나노스케일의 공극 구조 연구에 적합한 조건과 방법을 찾기 위해 집속 이온 빔 시스템(Focused Ion Beam, FIB)과 이온 밀링 시스템(Ion Milling System, IMS)을 이용하여 분석을 진행하였다. 셰일 저류층 내 공극 구조 연구를 위해 리아드 분지에서 획득된 A-068 시추공의 시료를 사용하였다. 각 시료마다 특성이 다르기 때문에 시료 전처리 방법과 조건을 달리하여 최적의 조건을 찾았고 FE-SEM을 이용하여 공극 이미지를 획득하였다. 연구 결과 국소 부위의 공극구조를 관찰하기 위해서는 FIB를 사용하여 시표 표면을 밀링 후 바로 공극 이미지를 얻는 것이 효율적이고 반면에 넓은 면적을 단시간에 밀링하여 여러 공극 구조를 관찰하기 위해서는 IMS를 이용해야 한다는 것을 확인했다. 특히 탄산염 광물 함량이 높고 강도가 큰 암석에 대해서는 FIB보다는 IMS를 활용하여 밀링을 수행해야 공극 구조 관찰이 가능하다는 사실이 밝혀졌다. 본 연구를 통해 셰일 저류층 내 공극 구조 관찰을 위한 방법이 정립되었으며 향후 이를 이용한 셰일 가스 저류층 시료 분석을 통해 공극의 크기나 형태가 셰일가스 회수 증진에 미치는 영향을 밝힐 수 있을 것이다.

Real-Time Spacer Etch-End Point Detection (SE-EPD) for Self-aligned Double Patterning (SADP) Process

  • Han, Ah-Reum;Lee, Ho-Jae;Lee, Jun-Yong;Hong, Sang-Jeen
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.436-437
    • /
    • 2012
  • Double patterning technology (DPT) has been suggested as a promising candidates of the next generation lithography technology in FLASH and DRAM manufacturing in sub-40nm technology node. DPT enables to overcome the physical limitation of optical lithography, and it is expected to be continued as long as e-beam lithography takes place in manufacturing. Several different processes for DPT are currently available in practice, and they are litho-litho-etch (LLE), litho-etch-litho-etch (LELE), litho-freeze-litho-etch (LFLE), and self-aligned double patterning (SADP) [1]. The self-aligned approach is regarded as more suitable for mass production, but it requires precise control of sidewall space etch profile for the exact definition of hard mask layer. In this paper, we propose etch end point detection (EPD) in spacer etching to precisely control sidewall profile in SADP. Conventional etch EPD notify the end point after or on-set of a layer being etched is removed, but the EPD in spacer etch should land-off exactly after surface removal while the spacer is still remained. Precise control of real-time in-situ EPD may help to control the size of spacer to realize desired pattern geometry. To demonstrate the capability of spacer-etch EPD, we fabricated metal line structure on silicon dioxide layer and spacer deposition layer with silicon nitride. While blanket etch of the spacer layer takes place in inductively coupled plasma-reactive ion etching (ICP-RIE), in-situ monitoring of plasma chemistry is performed using optical emission spectroscopy (OES), and the acquired data is stored in a local computer. Through offline analysis of the acquired OES data with respect to etch gas and by-product chemistry, a representative EPD time traces signal is derived. We found that the SE-EPD is useful for precise control of spacer etching in DPT, and we are continuously developing real-time SE-EPD methodology employing cumulative sum (CUSUM) control chart [2].

  • PDF

저온연소조건에서 급속압축기를 이용한 n-heptane/n-butanol 혼합연료의 착화지연에 관한 연구 (The investigation on the Ignition Delay of n-heptane/n-butanol Blend Fuel Using a Rapid Compression Machine at Low Temperature Combustion Regime)

  • 송재혁;강기중;;;최경민;김덕줄
    • 한국연소학회지
    • /
    • 제18권2호
    • /
    • pp.32-41
    • /
    • 2013
  • This study presents both experimental and numerical investigation of ignition delay time of n-heptane and n-butanol binary fuel. The $O_2$ concentration in the mixture was set to 9-10% to make high exhaust gas recirculation( EGR) rate condition which leads low NOx and soot emission. Experiments were performed using a rapid compression machine(RCM) at compressed pressure 20bar, several compressed temperature and three equivalence ratios(0.4, 1.0, 1.5). In addition, a numerical study on the ignition delay time was performed using CHEMKIN codes to validate experimental results and predict chemical species in the combustion process. The results showed that the ignition delay time increased with increasing the n-butanol fraction due to a decrease of oxidation of n-heptane at the low temperature. Moreover, all of the binary fuel mixtures showed the combustion characteristics of n-heptane such as cool flame mode at low temperature and negative-temperature-coefficient(NTC) behavior. Due to the effect of high EGR rate condition, the operating region is reduced at lean condition and the ignition delay time sharply increased compared with no EGR condition.

환경 인쇄 기술의 발전과 인쇄물의 $CO_2$ 발생량에 관한 연구 (A Study about Development of Environment Printing Technology and $CO_2$)

  • 이문학
    • 한국인쇄학회지
    • /
    • 제30권3호
    • /
    • pp.89-114
    • /
    • 2012
  • For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

조경분야 탄소성적표지제도 적용실태 및 대응전략 (Status and Response Strategies of Carbon Labeling in Landscape Architecture)

  • 김정호;윤용한
    • 한국환경과학회지
    • /
    • 제24권6호
    • /
    • pp.709-720
    • /
    • 2015
  • After analyzing the actual acquisition status of carbon labeling by year and by product for the past four years, as well as its certification in the construction-related sectors of greenhouse gas emission, this study attempted to present the problems and coping strategies upon issuing the carbon labeling certification in the landscape architecture. During the period of this analysis, the carbon labelings were acquired by 134 enterprises, 267 workplaces, and 735 products, while the percentage of acquisition was highest in the regular non-durable goods(49%), followed by energy-consuming durable goods(26%), regular production goods (19%), regular durable goods(3%), and service(3%). Furthermore, the acquisition certifications in construction sectors, were highest in the various pipes/panel(8 cases), followed by concrete(6 cases), gypsum board(4 cases), and landscape architecture materials(2 cases). The landscape architecture only had two cases in the acquisition certification for the first time in 2012, which accounted for 0.27% of the entire certification products, due to the uncertainty in the process, the lack of professionalism, and the lack of comprehension. However, the study conducted on the coping strategies for carbon labeling in the landscape architecture revealed the following: (1) regular reporting system management through the division of labor in the head office and factories, (2) the building of objective DB through the adoption of data management programs such as SAP, (3) continuous promotion and vitalization of the incentive system, (4) the adoption of mandatory or preferential application system in landscaping projects, management, and bidding, (5) enhancement of elasticity in deliberation of certification by recruiting experts in the landscape architecture sectors, and (6) provision of incentives for the cooperative firms acquiring the certification and support for their participation.

150kW급 열병합발전 하이브리드 시스템 최적화 연구 (Optimization of 150kW Cogeneration Hybrid System)

  • 최재준;김혁주;정대헌;박화춘
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 동계학술발표대회 논문집
    • /
    • pp.340-344
    • /
    • 2008
  • The importance of the more efficient cogeneration system is emphasized. Also the more clean energy is needed at recent energy system. The cogeneration system using Lean burn engine is more preferred to the system using Rich burn engine because of the electrical efficiency. Although the cogeneration system using Lean burn engine is economically preferred, because of the NOx emission level, the system using Rich burn engine with 3-way catalyst can only be used in Korea. The NOx regulation level is 50ppm at oxygen level 13%. The cogeneration hybrid system using Lean burn engine is up to be optimized because of the large amount of the extra-fuel at the after-burner system. The after-burner system at different concept was applied. The reduction time for the activation temperature of the DeNOx catalyst was achieved by making a hole between the combustor and boiler. Because of the lowered fuel consumption, the lowered temperature level was optimized by blocking the hole of the boiler The optimized cogeneration hybrid system consumes $76Nm^3/h$ LNG to produce 150kW electricity compared to before optimization $103Nm^3/h$ LNG. The system was accurately evaluated and the result is following ; 90% total efficiency, below 10 ppm NOx, 50ppm CO, 25ppm HC. The cogeneration hybrid system can meet the current NOx level and exhaust gas regulation. It can achieve the clean combustion gas and efficient cogeneration system.

  • PDF