• Korean Journal of Materials Research
• /
• v.5 no.1
• /
• pp.3-11
• /
• 1995

$(TiO_{2})$ thin films were deposited on p-Si(100) substrate by APMOCVD using titanium isopropoxide as a source material. The deposition mechanism was well explained by the simple boundary layer theory and the apparent activation energy of the chemical reaction controlled process was 18.2kcal /mol. The asdeposited films were polycrystalline anatase phase and were transformed into rutile phase after postannealing. The postannealing time and the film thikness as well as the postannealing temperature also affected the phase transition. The C-V plot exhibited typical charateristics of MOS diode, from which the dielectric constant of about 80 was obtained. The capacitance of the annealed film was decreased but those of the Nb or Sr doped films were not changed. I-V characteristics revealed that the conduction mechanism was hopping conduction. The postannealing and the doping of Nb or Sr cause to decrease the leakage current and to increase the breakdown voltage.

• Journal of Korean Foot and Ankle Society
• /
• v.14 no.2
• /
• pp.109-114
• /
• 2010

Purpose: The purpose of this study was to report the surgical outcome of reconstruction of neglected chronic Achilles tendon ruptures with various methods including Achilles tendon allograft. Materials and Methods: Between October 2003 and November 2008, 8 consecutive neglected chronic Achilles tendon ruptures with the defect gap of more than 4 cm underwent surgical reconstruction including V-Y advancement, gastrocnemius fascial turn-down flap, flexor hallucis longus transfer and Achilles tendon allograft. There were 7 males and 1 female who were evaluated at more than 18 months after surgery. At the time of followup, all patients were assessed with regard to postoperative complications, their self-reported level of satisfaction, the American Orthopaedic Foot and Ankle Society (AOFAS) Ankle-Hindfoot scale, 10 repetitive single heel rise, single leg hopping test, and ankle range of motion. Results: The AOFAS score increased from average 71.4 (50-87) to 96.4 (86-100). All patients were able to perform 10-repetitive single heel raise and single leg hopping at the latest follow up. No patient experienced wound complications and deep infection. Six patients were rated as 'excellent' and the other two as 'good'. Conclusion: Neglected chronic Achilles tendon ruptures could be successfully treated with careful selection of the reconstruction method according to the amount of defect gap. With an extensive defect, Achilles tendon allograft can be a good option when the reconstruction is not feasible otherwise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.611-617
• /
• 2000

Asynchronous mode W-CDMA system is kmown to be quite appropriate to the next generation mobile communication system, especially in a non-homogenious cellular architecture. In this case, however, each base station needs to use different spreading code for identification, so it is a demeanding task for a mobile terminal to find the best cell site and get an accurate code synchronization at the beginning of a communication. Since slow acquisition of a base station could mean the failure of initiation, a fast algorithm to accelerate the cell search process is essential. In this paper, a new cell search algorithm based on the binary code position modulation within the code block is proposed. Different cell sites are identified by different hopping code sequences, andeach position modulation is performed by the hopping code. The proposed algorithm is proved to make the cell search time in most places in a cell much shorter than the previous algorithms, and to make the receiver implementation simpler.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.67-75
• /
• 2008

In this paper, we analyze the performance of Follower Noise Jamming(FNJ) considering three practical tracking parameters such as tracking bandwidth, tracking time and tracking success probability. The performance of FNJ is compared with that of Partial-Band Noise Jamming(PBNJ) in terms of Symbol Error Rate(SER) at the communication receiver under the assumed typical operation model. It is observed that the performance of FNJ is non-linearly dependent on the tracking bandwidth, the tracking time and the tracking success probability. As we can easily expect, it is also observed that the performance of FNJ is better than that of the PBNJ. Finally, it is shown that, for a fixed tracking bandwidth, the combinations of the required tracking time and the tracking success probability which satisfy a certain required SER.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.7
• /
• pp.33-40
• /
• 2015

The time slot assignment problem (TSAP) or Satellite Communications scheduling problem (SCSP) for a satellite performs $n{\times}n$ ground station data traffic switching has been known NP-hard problem. This paper suggests $O(n^2)$ time complexity algorithm for TSAP of a satellite that performs $n^2{\times}n^2$ ground station data traffic switching. This problem is more difficult than $n{\times}n$ TSAP as NP-hard problem. Firstly, we compute the average traffic for n-transponder's basic coverage zone and applies ground station exchange method that swap the ground stations until all of the transponders have a average value as possible. Nextly, we transform the D matrix to $D_{LB}$ traffic matrix that sum of rows and columns all of transponders have LB. Finally, we select the maximum traffic of row and column in $D_{LB}$, then decide the duration of kth switch mode to minimum traffic from selected values. The proposed algorithm can be get the optimal solution for experimental data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1A
• /
• pp.1-11
• /
• 2009

In OFDMA or SC-FDMA systems one can generate time varying channels or frequency selective channels using multiple transmit antennas to achieve diversity without special space-time processing at the receivers. While low channel coding rate needs to be used for distributed-allocation SC-FDMA systems with a phase rolling technique to produce time fluctuation, relatively high channel coding rate can be used when cyclic delay diversity is used to increase frequency selectivity assuming quasi-static channel. On the other hand, for block-hopping SC-FDMA systems there is no significant difference between two diversity techniques in terms of optimal channel coding rates.

• Structural Monitoring and Maintenance
• /
• v.9 no.4
• /
• pp.359-371
• /
• 2022

Bridges are critical to the civil engineering infrastructure network as they facilitate movement of people, the transportation of goods and services. Given the aging of bridge infrastructure, federal officials mandate visual inspections biennially to identify necessary repair actions which are time, cost, and labor-intensive. Additionally, the expansion joints of bridges are rarely monitored due to cost. However, expansion joints are critical as they absorb movement from thermal effects, loadings strains, impact, abutment settlement, and vehicle motion movement. Thus, the need to monitor bridge expansion joints efficiently, at a low cost, and wirelessly is desired. This paper addresses bridge joint monitoring needs to develop a cost-effective, real-time wireless system that can be validated in a full-scale bridge structure. To this end, a wireless expansion joint monitoring was developed using commercial-off-the-shelf (COTS) sensors. An in-service bridge was selected as a testbed to validate the performance of the developed system compared with traditional displacement sensor, LVDT, temperature and humidity sensors. The short-term monitoring campaign with the wireless sensor system with the internet protocol version 6 over the time slotted channel hopping mode of IEEE 802.15.4e (6TiSCH) network showed reliable results, providing high potential of the developed system for effective joint monitoring at a low cost.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.3
• /
• pp.239-254
• /
• 1988

In this paper an exciter which performs modulation and amplification is composed of high power(30dBm) VCO(Voltage Controlled Oscillator) using push-pull circuit. Modulation is FSK using PLL(Phase Locked Loop). A single loop PLL synthesizer having sequency range of 42.5-100.5MHz, 25KHz channel spacing and switching time of 1msec converts down the exciter VCO frequency to 1.25MHz. This signal mixed with the FSK modulated signal coming in the phase detector of exciter. The acquisition time of exciter for frequency hoppng is less than 200usec, so the total acquisition time for transmission is less that 1.5msec. There is no need of additional power amplification because power amlifiction by high power VCO is high enough to communicate within near distance. The proposed frequency synthesizer is not complex so it is suitable for low cost slow frequency hopping spread spectrum communication.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.37-41
• /
• 2018

In this paper, we evaluate the power consumption of IEEE802.15.4e TSCH which uses the specific link scheduling scheme proposed in reference[1]. And we also compares it with the power consumption of conventional single channel IEEE802.15.4. The power consumption of IEEE802.15.4e TSCH is smaller than the conventional one under the any conditions of traffic. The reasons can be explained as the followings. Firstly, TSCH does not have backoff time because of using the collision free link scheduling. Secondly, there is the timing difference of MAC offset parameter between TSCH and conventional IEEE802.15.4 Lastly, the devices in TSCH mode sleep during the time slots which are not assigned to itself.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1066-1069
• /
• 2002

Orthogonal frequency division multiplexing (OFDM) is a special technique for communication systems which can support the high data rate transmission with sufficient robustness to fading channels. Tansmitter diversity with space-time block coding (STBC) is an attractive transmission scheme to improve the performance of systems. In this paper, we compare the performance of space-time block coded OFDM systems with that of conventional OFDM systems over fast fading channels. The block-interleaved (BI) STBC and frequency hopping (FH) OFDM are proposed in the study to provide the maximum achievable diversity gains. As the simulation results, the STBC OFDM, Bl-STBC OFDM and Bl-STBC FH-OFDM provide the much improved performance over the conventional OFDM. And the Bl-STBC FH-OFDM also provide the better performance than the STBC OFDM and Bl-STBC OFDM, especially, in the case of the two transmit antennas are employed while BI-STBC FH-OFDM can maintain the same data rate of 12 Mbps.