• Journal of Magnetics
• /
• 제22권2호
• /
• pp.315-325
• /
• 2017

Magnetically suspended sensitive gyroscopes (MSSGs) provide an interesting alternative for achieving precious attitude angular measurement. To effectively reduce the measurement error caused by the non-uniformity of the air-gap flux density in a MSSG, this paper proposes a novel compensation method based on measuring and modeling of the air-gap flux density. The angular velocity measurement principle and the structure of the MSSG are described, and then the characteristic of the air-gap flux density has been analyzed in detail. Next, to compensate the flux density distribution error and improve the measurement accuracy of the MSSG, a real-time compensation method based on the online measurement with hall probes is designed. The common issues caused by the non-uniformity of the air-gap flux density can be effectively resolved by the proposed method in high-precision magnetically suspended configurations. Comparative simulation results before and after compensation have verified the effectiveness and superiority of the proposed compensation method.

• 한국조사연구학회지:조사연구
• /
• 제10권2호
• /
• pp.1-21
• /
• 2009

본 연구는 시간일지 방식의 생활시간조사와 서베이문항 방식의 노동패널 자료를 대상으로 하여 탐색적 수준에서 측정방식의 차이가 성별 가사노동시간 추정에서 어떤 차이를 낳는지를 비교하였다. 연구결과 우리나라의 경우 서베이문항 방식에서 남성은 자신의 가사노동시간을 과다보고하고 여성은 과소보고하는 경향을 나타냈다. 보고차이에 관한 기존연구에 비추어 볼 때 남성의 과다보고는 일치하지만 여성의 과소보고는 매우 독특하다. 하위집단별 가사노동시간 분포를 살펴보면, 남성의 경우 사별/이혼자 집단에서 과다보고의 경향이 뚜렷이 나타난 반면 여성의 경우 유급노동, 돌봄 및 가사노동 부담이 큰 집단에서 과소보고의 경향이 나타났다. 이러한 보고차이는 가사노동과 관련된 젠더화된 사회규범과 시간부족 인식에 비추어 설명될 수 있었다. 기존연구에서는 과소보고에 대한 이론이 제대로 발달되지 않았는데, 본 연구는 시간부족 인식이 여성의 과소보고를 설명하는 중요한 이론적 가설이 될 수 있음을 제언하였다.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.100-108
• /
• 2006

Time-resolved current and voltage measurements for an inductive automotive spark system were made. Also presented are measurements of the total energy delivered to the spark gap. The measurements were made in air for a range of pressures from 1-18atm, at ambient temperatures. The measured voltage and current characteristics were found to be a function of many ignition parameters; some of these include: spark gap distance, internal resistance of the spark plug and high tension wire, and pressure. The voltages presented were measured either at the top of the spark plug or at the spark gap. The measurements were made at different time resolutions to more accurately resolve the voltage and current behavior throughout the discharge process. This was necessary because the breakdown event occurs on a time scale much shorter than the arc and glow phases. The breakdown, are, and glow voltages were found to be functions of spark plug resistance, gas density, and spark plug gap as expected from the literature. Spark duration was found to decrease as either pressure or gap was increased. The transition from the arc to glow phase is usually distinguished by a sudden rise in the voltage across the gap. At pressures above about 7atm this transition was not observed suggesting that a glow phase was not present. Energy delivered to the gap increased with increasing pressure. The effective resistance of the spark gap during discharge was about twice as large for the glow phase as the arc phase.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.706-713
• /
• 2002

In the multi-pass welding of pressure vessels or ships, the mechanical touch sensor system is generally used together with a manipulator to measure the gap and depth of the narrow gap to perform seam tracking. Unfortunately, such mechanical touch sensors may commit measuring errors caused by the eterioration of the measuring device. An automation system of narrow gap multi-pass welding using a laser vision system which can track the seam line of narrow gap and which can control welding power has been developed. The joint profile of the narrow gap, with 250mm depth and 28mm width, can be captured by laser vision camera. The image is then processed for defining tracking positions of the torch during welding. Then, the real-time correction of lateral and vertical position of the torch can be done by the laser vision system. The adaptive control of welding conditions like welding Currents and welding speeds, can also be performed by the laser vision system, which cannot be done by conventional mechanical touch systems. The developed automation system will be adopted to reduce the idle time of welders, which happens frequently in conventional long welding processes, and to improve the reliability of the weld quality as well.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권7호
• /
• pp.359-364
• /
• 2000

This paper is introducing a newly developed spark-gap switch with dual trigger system, into which the current from the voltage source is injected along with the test sequence during the synthetic testing of high voltage circuit-breaker. The currently-used spark gap switch is narrow in operating range due to the use of the method of triggering energy being injected by single way. As a result, the frequent happening of misoperation has greatly reduced the test quality and test efficiency and has required the cost of maintenance excessively. In this study, accordingly, in order to basically remove these problems, another triggering system is installed to the opposite direction on the existing triggering system; attaching the same time and the same rising time of pulse wave as on the existing system, so that at a comparatively trigger gap distance from the main electrode(the gap can be operated at 60% of self-break voltage, while at 80% in the current system), the main electrode has been enabled to be closed by the development of spark gap switch with dual trigger system.

• International Journal of Korean Welding Society
• /
• 제2권1호
• /
• pp.45-51
• /
• 2002

In the multi-pass welding of pressure vessels or ships, the mechanical touch sensor system is generally used together with a manipulator to measure the gap and depth of the narrow gap to perform seam tracking. Unfortunately, such mechanical touch sensors may commit measuring errors caused by the deterioration of the measuring device. An automation system of narrow gap multi-pass welding using a laser vision system which can track the seam line of narrow gap and which can control welding power has been developed. The joint profile of the narrow gap, with 250mm depth and 28mm width, can be captured by laser vision camera. The image is then processed for defining tracking positions of the torch during welding. Then, the real-time correction of lateral and vertical position of the torch can be done by the laser vision system. The adaptive control of welding conditions like welding currents and welding speeds, can also be performed by the laser vision system, which cannot be done by conventional mechanical touch systems. The developed automation system will be adopted to reduce the idle time of welders, which happens frequently in conventional long welding processes, and to improve the reliability of the weld quality as well.

• Journal of Welding and Joining
• /
• 제17권1호
• /
• pp.88-96
• /
• 1999

The effects of root gap on welding residual stress and deformation are dealt with the multi-pass weldment with three kinds(0, 6, 30mm) of root gap by F.E.M common code, and then compared with experiment data. In this analysis, an 100% ramp heat input model was used to avoid numerical convergence problem due to an instantaneous increase in temperature near the fusion zone, and the effect of a moving arc in a two dimensional plane was also included. During the analysis, a small time increment was applied in a period with instantaneous temperature fluctuation while a large time increment was used in the rest period. The residual stress is distributed as symmetric types and maximum value is also equivalent when the weldment with 0mm and 6mm root gap is welded. In the case of 30mm root gap welding, the distribution of the residual stress extends over a wide range as asymmetric types due to the built-up weld, and most of the residual stress is biased in the side of a built-up weld part. In case of 0mm gap welding and 6mm gap welding, a little angular distortion occurs, but the level of deformation is small. When the weldment with 30mm root gap is welded, the angular deformation of the asymmetric types, however, occurs larger than the other specimens. The experimental and the analytic results show good coincidence and indicate that the welding residual stress and deformation distribution of 30 mm root gap specimen may be asymmetric and the amplitude is larger than those of root gap specimen under standard.

• Communications for Statistical Applications and Methods
• /
• 제21권5호
• /
• pp.387-393
• /
• 2014

Recurrent gap times are analyzed with diverse methods under several assumptions such as a marginal model or a frailty model. Several resampling techniques have been recently suggested to estimate the covariate effect; however, these approaches can be applied with a time-fixed covariate. According to simulation results, these methods result in biased estimates for a time-varying covariate which is often observed in a longitudinal study. In this paper, we extend a resampling method by incorporating new weights and sampling scheme. Simulation studies are performed to compare the suggested method with previous resampling methods. The proposed method is applied to estimate the effect of an educational program on traffic conviction data where a program participation occurs in the middle of the study.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.87-90
• /
• 2009

A dual-cell-gap transflective liquid crystal display (TR-LCD) with identical response time in the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy condition is used to decrease the response time, while in the reflective region weak anchoring energy condition is used to increase the response time. The simulated dual-cell-gap TR-LCD has good performances.

• 한국표면공학회지
• /
• 제49권4호
• /
• pp.363-367
• /
• 2016

For the industrial application of electropolishing process, we investigated electropolishing characteristics of stainless steel through increasing the specimen size or electrode gap. In this study, we performed a set of experiment with the specimen size of $10cm{\times}10cm$ and the electrode gap of 1 cm or more. In the view of the electropolishing process, the electrolyte temperature and the polishing time were most important factors compared with the current density and the electrode gap. Especially, the electrolyte temperature most importantly affected surface roughness and current efficiency on electropolishing characteristics. For the industrial application of electropolishing process, it should be considered for important factors such as electrolyte temperature, polishing time, current density and electrode gap, etc.