• Title/Summary/Keyword: Time factor

Search Result 9,904, Processing Time 0.034 seconds

An Experimental Study on the Properties of Porous Concrete according to Correction Factor and Specimen Thickness (보정계수 및 시험체두께가 포러스콘크리트의 기초물성에 미치는 영향에 관한 실험적 연구)

  • 김재환;이성일;장종호;오시덕;박정호;김무한
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2002.11a
    • /
    • pp.55-58
    • /
    • 2002
  • This study is to analyze the influence of correction factor and specimen thickness on the fundamental properties of porous concrete. Results of this study were shown as follows; 1) As correction factor decrease, compaction time according to correction factor and specimen thickness decrease. Also, though correction factor is same, as specimen thickness increase, compaction time increase. So It mutt be considered that the influence of compaction time according to correction factor and specimen thickness. 2) As correction factor decrease, difference of measured thickness and designed thickness according to correction factor and specimen thickness decrease. Also, correction factor of aggregate of 10~l5mm is smaller than that of 5~l0mm. So It must be considered that the influence of correction factor according to size of aggregate.

  • PDF

A Study on Determination of the Degree of Consolidation and Time Factor Considering Site Ground Characteristics (현장 지반특성을 고려한 압밀도 및 시간계수 결정에 관한 연구)

  • Choi, Min-Ju;Kim, Hung-Nam;Lee, Kang-Il
    • Journal of the Korean Geosynthetics Society
    • /
    • v.21 no.1
    • /
    • pp.23-32
    • /
    • 2022
  • This study is conducted to minimize the problems caused by the difference between the settlement and settlement time of the one-dimensional consolidation analysis by the Terzaghi's consolidation theory, which is generally used in domestic soft soil design, from the settlement and settlement time measured at the field site. Consolidation-time factor considering the field site characteristics can be determined using the relationship among the degree of consolidation, settlement time, and time factor, the time-settlement curve measured at the field is reverse- analysis using a numerical-analysis technique to reproduce the same consolidation behavior as in the field. Time-settlement and time-excessive pore water pressure data when the same consolidation behavior as the site is reproduced Consolidation-time factor of the soil of Songsan Green City by settlement and excess pore water pressure was calculated using the settlement and excess pore water pressure for each settlement time. If the results of this study use the Terzaghi consolidation-time factor, which does not consider the consolidation characteristics of the soft ground target area, it is difficult to determine the end time of the soft ground during construction. It is necessary to use the established settlement-time factor.

A Study on the Relations among Stock Return, Risk, and Book-to-Market Ratio (주식수익률, 위험, 장부가치 / 시장가치 비율의 관계에 관한 연구)

  • Kam, Hyung-Kyu;Shin, Yong-Jae
    • Journal of Industrial Convergence
    • /
    • v.2 no.2
    • /
    • pp.127-147
    • /
    • 2004
  • This paper examines the time-series relations among expected return, risk, and book-to-market(B/M) at the portfolio level. The time-series analysis is a natural alternative to cross-sectional regressions. An alternative feature of the time-series regressions is that they focus on changes in expected returns, not on average returns. Using the time-series analysis, we can directly test whether the three-factor model explains time-varying expected returns better than the characteristic-based model. These results should help distinguish between the risk and mispricing stories. We find that B/M is strongly associated with changes in risk, as measured by the Fama and French(1993) three-factor model. After controlling for changes in risk, B/M contains little additional information about expected returns. The evidence suggests that the three-factor model explains time-varying expected returns better than the characteristic-based model.

  • PDF

A Study on Simultaneous Load Factor of Intelligent Electric Power Reduction System in Korea (한국의 지능형 전력동시부하율 저감시스템에 관한 연구)

  • Kim, Tae-Sung;Lee, Jong-Hwan
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.35 no.1
    • /
    • pp.24-31
    • /
    • 2012
  • This study is designed to predict the overall electric power load, to apply the method of time sharing and to reduce simultaneous load factor of electric power when authorized by user entering demand plans and using schedules into the user's interface for a certain period of time. This is about smart grid, which reduces electric power load through simultaneous load factor of electric power reduction system supervision agent. Also, this study has the following characteristics. First, it is the user interface which enables authorized users to enter and send/receive such data as demand plan and using schedule for a certain period of time. Second, it is the database server, which collects, classifies, analyzes, saves and manages demand forecast data for a certain period of time. Third, is the simultaneous load factor of electric power control agent, which controls usage of electric power by getting control signal, which is intended to reduce the simultaneous load factor of electric power by the use of the time sharing control system, form the user interface, which also integrate and compare the data which were gained from the interface and the demand forecast data of the certain period of time.

Analysis on the Effects of the Heat Loss Coefficient on the Operation Time of Sprinkler in Compartment Fire (구획 화재에서 스프링클러 열 손실계수 변화에 따른 작동 시간 분석)

  • You, Woo Jun
    • Fire Science and Engineering
    • /
    • v.32 no.5
    • /
    • pp.34-39
    • /
    • 2018
  • In this study, the experiment conditions for the variation of heat release rate in compartment space were constructed to analyze the effects of fire spread and the operation time of sprinkler in accordance with the heat loss of the sprinkler's heat element. The compartment composed of fire board (width = 0.3 m, height = 0.5 m, length = 3.0 m), are manufactured to measure the temperature distributions in the inner space, the mass loss rate and heat release rate during the experiment of N-heptane pool fire test. Also, the operation time of sprinkler is analyzed with the installation of sprinkler and C-factor using Fire Dynamics Simulator Ver.6 under the experiment conditions. The results show that the operation time of sprinkler, which has RTI $100(m{\cdot}s)^{0.5}$ operating temperature $70^{\circ}C$, is 30 s~60 s for C-factor = 0 and 1, 62 s~92 s for C-factor = 3, and 120 s over for C-factor = 5, respectively.

Conversion Factor Estimates between the Rain Data per Minute and Fixed-Time-Interval (분단위 강우자료를 활용한 임의-고정시간 환산계수의 추정)

  • Moon, Young-Il;Oh, Tae-Suk;Oh, Kun-Taek;Jun, Si-Young
    • 한국방재학회:학술대회논문집
    • /
    • 2008.02a
    • /
    • pp.679-682
    • /
    • 2008
  • Probability precipitation is one of the most important factor for designing the hydrology structures. Probability precipitation is calculated based on the frequency analysis on each durations of annual maximum rainfall data. For frequency analysis we need a conversion factor between the rain data per random-time interval and fixed-time-interval. In this study, the minutely precipitation data on observatory of the Meteorological Administration are used for 37 stations. Therefore, we should conversion factors between the rain data per minute and fixed-time-interval.

  • PDF

Thermal Shock Stress Intensity Factor and Fracture Test (열충격 응력세기계수와 파괴실험)

  • 이강용;심관보
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.14 no.1
    • /
    • pp.130-137
    • /
    • 1990
  • Thermal shock stress intensity factor for an edge-cracked plate subjected to thermal shock is obtained from Bueckner's weight function method. It is shown that thermal shock stress intensity factor has maximum values with variation of time and crack length and that there is most dangerous crack length. By comparing thermal shock stress intensity factor with fracture toughness, the fracture time and critical temperature difference due to thermal shock are determined theoretically. Under constant thermal shock temperature difference, and increase of crack length is shown to increase fracture time. The theoretical fracture time is compared with experimental value measured by acoustic emission method with soda lime glass.

Simulation of electromigration behavior on ULSI′s interconnect under pulsed DC stress : frequency, duty factor, temperature effect (Pulsed DC 조건에서 반도체 배선의 electromigration 시뮬레이션 : 주파수, duty factor, 온도효과)

  • 이동현;안진호;박영준
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2002.07a
    • /
    • pp.40-42
    • /
    • 2002
  • Electromigration is atomic diffusion driven by a momentum transfer from conducting electrons. With every new generation of intergrated circuits, interconnect line widths have been reduced and current densities in the interconnect have become higher. This leads to an increase in the threat to interconnect reliability due to electromigration. In this paper, we simulated stress evolution with changing temperature, duty factor(ratio of on time and pulse time), frequency under pulsed DC condition. As a result, we predict MTF(median time to failure) and found that exponent n is affected by changing temperature, duty factor.

  • PDF

Error Analysis of Muskingum-Cunge Flood Routing Method (Muskingum-Cunge 홍수추적 방법의 오차해석)

  • Kim, Dae-Geun;Seo, Il-Won
    • Journal of Korea Water Resources Association
    • /
    • v.36 no.5
    • /
    • pp.751-760
    • /
    • 2003
  • Error analysis of finite difference equation on the Muskingum-Cunge flood routing method with free time and space weighting factor was carried out. The error analysis shows that the numerical solution of the Muskingum-Cunge method becomes diverged with time when the sum of time weighting factor and space weighting factor is greater than 1.0. Numerical diffusion increases when the sum of time weighting factor and space weighting factor decreases. Numerical diffusion and numerical oscillation increase when the grid resolution is coarse. Numerical experiments and field applications show that the Muskingum-Cunge method with free space weighting factor is more effective for simulating the flood routing with great peak diminution than conventional Muskingum-Cunge method with fixed space weighting factor, 0.5.

Co-relation between Questionnaire for Buzhongyiqi-Tang and Electrogastrography (보중익기탕 변증설문지와 위전도의 상관성 연구)

  • Kim, Sun-Hyeok;Park, Young-Bae;Park, Young-Jae;Oh, Hwan-Sup
    • The Journal of the Society of Korean Medicine Diagnostics
    • /
    • v.13 no.2
    • /
    • pp.34-44
    • /
    • 2009
  • Background : Currently, as a method of standardization of prescription, questionnaire for Buzhongyiqi-Tang[補中益氣湯] was developed, and which is a Objectives : The purpose of this thesis is to testify whether differentiation of Lao Juan Shang[勞倦傷] etiology is relative to mobility of gastric smooth muscle. Methods : The subjects(20 to 65 years old; 14 males, 46 females) were isolated from drinking alcohols for 24 hours before the experiment, and fasted for 8 hours, and measured for electrogastrography(EGG) and they filled out Questionnaire for Buzhongyiqi-Tang. Results : 1. Six factors from the factor analysis of Questionnaire for Buzhongyiqi -Tang were named and classified as Spleen-Qi deficiency syndrome factor [脾虛] (factor 1), Lung-Qi deficiency syndrome factor [肺虛] (factor 2), Working factor [習慣] (factor 3), Yin-Fire factor [陰火] (factor 4), Jung-Qi deficiency syndrome factor [中氣虛] (factor 5), and Stomach-Qi deficiency syndrome factor [胃虛] (factor 6). 2. As for the reliability of Questionnaire for Buzhongyiqi-Tang, we used Cronbach's alpha coefficient. Cronbach's alpha coefficient was 0.772 for the mean of the item-total. 3. Lung-Qi deficiency syndrome factor(factor2) had significant correlation with Bradygastria Time (r=-0.312, p<0.05). 4. Working factor(factor3) had significant correlation with Bradygastria Time (r=-0.329, p<0.05). 5. Yin-Fire factor(factor4) had significant correlation with Power Ratio (r=-0.328, p<0.05). Conclusions : It is shown that Bradygastria Time and Power Ratio tended to decrease against postprandial DP increased and postprandial frequency decreased in normal case.

  • PDF