• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.9
• /
• pp.1400-1409
• /
• 2001

This paper describes a fiber optic sensor suitable for non-contact detection of ultrasonic waves. This sensor is based on a fiber optic Sagnac interferometer. Quadrature phase bias between two interfering laser beams in Sagnac loop is introduced by a polarization controller. A stable quadrature phase bias can be confirmed by observing the interferometer output versus phase bias. This method eliminates a digital signal processing for detection of ultrasonic waves using Sagnac interferometer. Interference intensity is affected by the frequency of ultrasonic waves and the time delay of Sagnac loop. Collimator is attached to the end of the probing fiber to focus the light beam onto the specimen surface and to collect the reflected light back into the fiber probe. Ultrasonic waves produced by conventional ultrasonic transducers are detected. This fiber optic sensor based on Sagnac interferometer is very effective for detection of small displacement with high frequency such as ultrasonic waves used in conventional non-destructive testing.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.40-46
• /
• 2020

Safe security technology is required for the startup ecosystem according to the construction and service of a joint open platform in the financial sector. Financial industry standard open API recommends that payment-related fintech companies develop/apply additional security technologies to protect core API authentication keys in the mutual authentication process. This study proposes an enhanced API security protocol using multiple channels. It was designed in consideration of the compatibility of heterogeneous platforms by further analyzing the problems and weaknesses of existing open API related research. I applied the method of concealment to remove the additional security channels into a single channel of the existing security protocols. As a result of the performance analysis, the two-way safety of the communication session of the multi-channel and the security of the man-in-the-middle attack of the enhanced authentication key were confirmed, and the computational performance of the delay time (less than 1 second) in the multi-session was confirmed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.341-350
• /
• 2006

In this paper, a new method for detecting breast cancer is proposed, which utilizes dielectric characteristics of pathological tissues and time delay of back scattered response, and its feasibility was investigated. We have developed a detection algorithm and verified it by numerical simulation and measurement for a prototype system. For a prototype system, we have fabricated experimental model(artificial breast with a cancer) and UWB(ultra-wideband) antenna. The results of the measurement simulation show an excellent detection capability of a cancer tissue. It is found that a good UWB antenna and a good calibration signal are key elements of such detection system. Further study is ongoing to develop a commercial system.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.3
• /
• pp.260-265
• /
• 2005

Patient-controlled analgesia (PCA) has been widely used for postoperative pain control in medical surgery parts. Conventional intramuscular analgesia (IMA) is also effective in postoperative pain control, but it has some disadvantages that depend on patients' perception of pain and the anxiety that they endure caused by the delay of the injection time. This study was conducted to assess the efficacy and postoperative outcomes of intravenous PCA compared to IMA injections in 36 patients (BSSRO). Three factors were compared: amount of pain in PCA and IMA group ; amount of pain according to the sex in PCA and IMA group and the amount of pain according to the analgesia use. Results of this study did not demonstrate a statistically significant difference in any of these, using a p value of 0.05. The results of this study were as follows. : 1. There was no statistically significant difference in VAS pain score between IMA group and PCA group. 2. There was no statistically significant difference according to the sex. 3. There was no statistically significant difference according to the amount of PCA. The history of PCA is about 30 years and many literatures have reported about its effects, complications, methods, advantages and disadvantages. So, this study has some limitations of small sample size to conclude the effects of PCA. But when the decision about the method for postoperative pain control has to be made, it should be made based on patient or physician preference and cost factors rather than on the trend.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.4
• /
• pp.490-493
• /
• 2000

Mesiodens are supernumerary teeth in the region of the maxillary central incisors, a condition which can lead to disorders of the dentition. Their presence may lead to disorders, such as delay in eruption of permanent teeth, development of dentigerous cysts, resorption of adjacent roots and eruption of a supernumerary tooth into nasal cavity. The optimal time for surgical intervention is controversial. Early diagnosis is important so as to enable good prognosis. Diagnosis primarily depends on x-ray films. Panorama film, occlusal film, periapical film have been used for detection of mesiodens. But, all of them have disadvantages. $SCANORA^{(R)}$ is a multimodal radiology system which utilizes the principles of narrow beam radiology and spiral tomography. Pre-programmed imaging procedure are provided for many dental situations An optional personal computer can be connected into the unit to help design the examination. We report two cases diagnosed by $SCANORA^{(R)}$. When compared with tube shift technique, it is simple and exact method of detecting mesiodens.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.67-74
• /
• 2001

In this paper, we propose a new method to improve tile processing of route recovery of the existing DSR algorithm on detection of route error. In mobile ad hoc networks, mobile nodes themselves have routing capability. Thus, a well-defined routing protocol is required for route set-up between two mobile nodes. However, the existing DSR routing protocol has problem with dropping of packets due to the recovery delay when a route error occurs. In order to alleviate tile problem, we propose an enhanced DSR protocol to reduce the route error recovery tine and evaluate the protocol through simulation. As tile result of evaluation, we found the proposed DSR protocol provided about 4 to 30 times faster route error recovery time according to the test scenario than the existing DSR protocol.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.115-122
• /
• 2010

The importance of the life cycle cost (LCC) analysis for bridges has been recognized over the last decade. However, it is difficult to predict LCC precisely since the costs occurring throughout the service life of the bridge depend on various parameters such as design, construction, maintenance, and environmental conditions. This paper presents a methodology for the optimal life cycle cost design of a bridge. Total LCC for the service life is calculated as the sum of initial cost, damage cost, maintenance cost, repair and rehabilitation cost, user cost, and disposal cost. The optimization method is applied to design of a bridge structure with minimal cost, in which the objective function is set to LCC and constraints are formulated on the basis of Korean Bridge Design Code. Initial cost is calculated based on standard costs of the Korea Construction Price Index and damage cost on damage probabilities to consider the uncertainty of load and resistance. Repair and rehabilitation cost is determined using load carrying capacity curves and user cost includes traffic operation costs and time delay costs. The optimal life cycle cost design of a bridge is performed and the effects of parameters are investigated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1493-1498
• /
• 2000

In this paper, we introduce a modified interference cancellation scheme to overcome MAI in DS-CDMA. Among ICs(Interference Cancellers), PIC(Parallel IC) requires the more complexity, and SIC(Successive IC) faces the problems of the long delay time. Most of all, the adaptive detector achieves the good BER performance using the adaptive filter conducted iteration algorithm. so it requires many iterations. To resolve the problems of them, we propose an improved adaptive detector that the received signal removed MAI through the sorting scheme and the cancellation method are fed into the adaptive filter. Because the improved input signal is fed into the adaptive filter, it has the same BER performance only using smaller iterations than the conventional adaptive detector, and the proposed detector having adaptive filter requires less complexity than the other detectors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.430-439
• /
• 2008

In this paper, we propose a sender-based TCP congestion control scheme for downward vertical handover (DVHO), in which mobile node moves from a cellular network to a wireless LAN. DVHO can give rise to severe performance problems in TCP throughput because it causes a drastic change of link characteristics. Particularly, TCP executes falsely congestion control by packet reordering, which is occurred from link delay difference between a cellular link and a wireless LAN link. Therefore, the congestion window is reduced. And unnecessary retransmissions wastes bandwidth. To solve these problems, we propose a method using estimated round-trip time in cellular link to process duplicated ACKs from reordering. Furthermore, the duplicated ACKs are used to the control congestion window size. Simulation result shows that the proposed scheme can solve problems. Moreover, the proposed scheme can have better performance than TCP New Reno and nodupack.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.9
• /
• pp.335-340
• /
• 2014

Crowd Sourcing-based Social App Manufacturing environment, a small app development project by a team of anonymous virtual performed without the constraints of time and space, and manage it for the app development process need to be automated method. Virtual teams with anonymity is a feature of the Social App Manufacturing, is an important factor that increases the uncertainty of whether the completion of the project or reduction in visibility of the progress of the project. In this study, as one of how to manage the project of Social App Manufacturing environment, the impact of risk that can be used to quantitatively measure the impact of the risk of delay in development has on the project also proposes a measurement model. Effects of risk and type of the impact of risks associated with delays in the work schedule also define the characteristic function, measurement model that has been proposed, suggest the degree of influence measurement equation of risk of the project in accordance with the progressive. The advantage of this model, the project manager is able to ensure the visibility of the progress of the project. In addition, identify the project risk of work delays, and to take precautions.