• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.205-218
• /
• 2012

Mobility management of the mobile nodes and provision of seamless handover is crucial to an efficient support for the global roaming of the mobile nodes in next-generation wireless networks. Mobile IPv6 and mobility management in extended IP layer, which highly depend on traffic characteristics and user mobility models, were proposed by the IETF. Therefore, to evaluate the in-depth performance about these factors is important. Generally, the performance of IPv6-based mobility management protocol is evaluated through simulation. This paper shows the correlation between network parameters and performance metrics through numerical results, which is investigated how influence handoff latency and packet loss. And this paper uses mathematical analysis of the system parameters, such as the subnet residence time, the packet arrival rate and delay in wireless connection through the analytical framework which evaluate the performance of IPv6-based mobility management protocol.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1797-1803
• /
• 1997

Message handling function of the SS7(Signaling System N0.7) provides signaling traffic routing capabilities to transfer the signaling traffic to the destination nodes in the signaling network. This message handling function should be handled without any transfer delay for real time processing of large amount of signaling traffic for data communication service, and visual information service. In this paper, we suggest two routing algorithms working on the distributed message handling processors which were specially designed for message handling function. The one is an internal distributing algorithm for equal distribution of signaling traffic among the distributed message handling processors and the other is a distributing algorithm for distribution of signaling traffic in the multiple signaling routes. Both of algorithms are using signaling link selection codes labled in each signaling messages. It is shown that the suggested algorithms are very efficient for routing signaling traffic at the fault condition of signaling routes and the restoration of unavailable signaling routes.

• Smart Media Journal
• /
• v.2 no.1
• /
• pp.8-16
• /
• 2013

The significant enhancement of the edge portion of computer networks including user-side machines and last mile network links encourages the research of the overlay network based data dissemination systems. Varieties of overlay network based data dissemination systems has distinct purposes, and each of them has a proper structure of an overlay network and a efficient communication protocol. In this paper, overlay network based data dissemination systems for Flash Dissemination, whose target is the distribution of relatively small size data to very large number of recipients within very short time, are explored. Mainly two systems, RECREW and FaReCAST, are introduced and analyzed in the aspects of design considerations for overlay networks and communication protocols. According to evaluations for flash dissemination scenarios, it is observed that the proposed overlay network based flash dissemination systems outperforms the previous overlay network based multicasting systems, in terms of the reliability and the dissemination delay. Moreover, the theoretical analysis of the reliability of data dissemination is provided by analysing FaReCAST.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.159-166
• /
• 2010

For a grid-connected inverter in distributed generation systems, the current control is essential, and recently, the predictive current control based on a high performance digital signal processors (DSP) to satisfy a fast dynamic response has been widely investigated. However, the performance of predictive current control is degraded by the time delay due to digital implementation, the parameter and measured value errors and the interference of noise, and also theses make system even unstable. Therefore, this paper proposes the predictive current control using grid voltage observer for grid-connected inverter applications. To determine the relevant voltage observer gain, the low-order harmonics of grid voltage are considered, and the effect of filter parameter errors is analyzed. The proposed method has a fast current response capability, the robustness to noise and simple implementation due to voltage sensorless control and the robust current control performance to low-order grid harmonics. The feasibility of the proposed method is verified by simulation and experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.33-33
• /
• 2007

In PDP industry, the dielectrics and barrier ribs have been required with low dielectric constant, low melting point and Pb-free composition due to the low power consumption, low signal delay time and the environment restriction. We were studied with $B_2O_3-Al_2O_3$-SrO glass systems about optical, thermal and dielectric properties. The glass forming region of the $B_2O_3-Al_2O_3$-SrO glass systems was narrow due to the amount of the glass former $(B_2O_3)$. The glass transition temperature (Tg) of the glasses was at $550{\sim}590^{\circ}C$. The glasses have 6~8 for the dielectric constant. Furthermore, the transmittance of the glasses was over 80% on the range of the visible ray. From the results, the glasses of the $B_2O_3-Al_2O_3$-SrO glass systems should enable to be a good candidate of the PDP devices for information display with low dielectric constant. The aim of this study is to give a fundamental result of new glass system for low dielectric constant in the information display.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.125-134
• /
• 2009

Recently, as IT technology and the ubiquitous environment have diffused, the application of these techniques are being attempted in the field of traffic operations and management. Therefore, it is necessary to develop data collection systems and signal control strategies that are suitable in the ubiquitous environment and that will improve efficiency and safety of signalized intersections. The authors conducted a study on the Wireless Sensor Network (WSN) signal control strategy using a wireless communication network between individual vehicles and a signal-control system and full actuated signal control technique to propose a new signal control strategy in the ubiquitous environment. The WSN was defined to evaluate the algorithm used with PARAMICS API simulation. The simulation produced results that the WSN signal control is more effective than other signal control methods. The WSN signal control could reduce vehicle delay time to a maximum of 64% in comparison with other signal control methods in low and near saturation flow conditions.

• Journal of Internet Computing and Services
• /
• v.4 no.5
• /
• pp.77-86
• /
• 2003

This paper introduces the extension of SIP protocol for Multiparty Conference and the implementation of IP-based Multi-Conference. SIP protocol is a signaling protocol for initiating, modifying and terminating interactive sessions (voice, video, text, application). Multiparty conference system is implemented by RTP protocol for real time transmission and by H.323 for call setup. As H.323 fits into PSTN, it has some problems (call setup delay, hard implementation) for IP applications. IETF developed SIP protocol used for signaling in IP networks. However this SIP protocol doesn't explain signal protocol about multimedia conference, which is different from the existing H.323. So this paper describes the extension of SIP according to SIP Specification and case study for the multimedia conference.

• Structural Engineering and Mechanics
• /
• v.76 no.4
• /
• pp.465-477
• /
• 2020

This paper presents an investigation on the dynamic behavior of SRC columns with built-in cross-shaped steels under impact load. Seven 1/2 scaled SRC specimens were subjected to low-speed impact by a gravity drop hammer test system. Three main parameters, including the lateral impact height, the axial compression ratios and the stirrup spacing, were considered in the response analysis of the specimens. The failure mode, deformation, the absorbed energy of columns, as well as impact loads are discussed. The results are mainly characterized by bending-shear failure, meanwhile specimens can maintain an acceptable integrity. More than 33% of the input impact energy is dissipated, which demonstrates its excellent impact resistance. As the impact height increases, the flexural cracks and shear cracks observed on the surface of specimens were denser and wider. The recorded time-history of impact force and mid-span displacement confirmed the three stages of relative movement between the hammer and the column. Additionally, the displacements had a notable delay compared to the rapid changes observed in the measured impact load. The deflection of the mid-span did not exceed 5.90mm while the impact load reached peak value. The impact resistance of the specimen can be improved by proper design for stirrup ratios and increasing the axial load. However, the cracking and spalling of the concrete cover at the impact point was obvious with the increasing in stiffness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1845-1851
• /
• 2007

Background noise and room reverberation are two causes of degradation in speech in listening situations. Many algorithms developed to enhance reverberant speech. In this paper we propose a dereverberation method for enhancement of speech using modified the linear prediction(LP) residual in reverberant room condition. The proposed dereberberation method based on the fact that the signification excitation of the vocal tract system takes place at the instant of glottal closure in voiced speech. Our method used delay information form each sensor, and we need reverberant signals from 3 sensors. We obtain a new LP residual signal using modified IP residual combination which derived form weighting of the LP residual and the Hilbert transform of LP residual. The nature of the coherently added Hilbert envelop has several large amplitude spikes because of the effects of noise and reverberation. This residual of the clean speech is used to excite the time-varying all-pole filter to obtain the enhanced speech. We achieved simulation of proposed algorithm for performance analysis in reverberation environment. The proposed algorithm improves substantially the quality of reverberant speech.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.5
• /
• pp.526-535
• /
• 2019

Objective : While the risk of aneurysmal rebleeding induced by catheter cerebral angiography is a serious concern and can delay angiography for a few hours after a subarachnoid hemorrhage (SAH), current angiographic technology and techniques have been much improved. Therefore, this study investigated the risk of aneurysmal rebleeding when using a recent angiographic technique immediately after SAH. Methods : Patients with acute SAH underwent immediate catheter angiography on admission. A four-vessel examination was conducted using a biplane digital subtraction angiography (DSA) system that applied a low injection rate and small volume of a diluted contrast, along with appropriate control of hypertension. Intra-angiographic aneurysmal rebleeding was diagnosed in cases of extravasation of the contrast medium during angiography or increased intracranial bleeding evident in flat-panel detector computed tomography scans. Results : In-hospital recurrent hemorrhages before definitive treatment to obliterate the ruptured aneurysm occurred in 11 of 266 patients (4.1%). Following a univariate analysis, a multivariate analysis using a logistic regression analysis revealed that modified Fisher grade 4 was a statistically significant risk factor for an in-hospital recurrent hemorrhage (p=0.032). Cerebral angiography after SAH was performed on 88 patients ${\leq}3$ hours, 74 patients between 3-6 hours, and 104 patients >6 hours. None of the time intervals showed any cases of intra-angiographic rebleeding. Moreover, even though the DSA ${\leq}3$ hours group included more patients with a poor clinical grade and modified Fisher grade 4, no case of aneurysmal rebleeding occurred during erebral angiography. Conclusion : Despite the high risk of aneurysmal rebleeding within a few hours after SAH, emergency cerebral angiography after SAH can be acceptable without increasing the risk of intra-angiographic rebleeding when using current angiographic techniques and equipment.