• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.1004-1011
• /
• 1996

This paper covers the technology developmental stage work for the automatic ammunition loading system mainly focusing on the controller design of the electro-hydranlic type direct drive multi-axis manipulator. Mathematical model of the plant derived and PIDM servo-controller structured. Comparative study between the analytical and experimental work has been carried out to help understand the response property of the direct dine multi-axis robot. In the direct drive robot, non-negligible amount of disturbance and load Induced dynamics variation are transmitted to the drive axis and nonlinearity is highly observed. Thereupon a robust controller Implementing time-delay control law is proposed, and computer simulation confirms the possibility for the time-delay control application against the unpredictable disturbance and load-Induced dynamics variation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.872-875
• /
• 2004

In this paper, thermal response analysis of a temperature controlled three-axis accelerometer for high temperature environments with integrated micro-heaters and temperature sensors is investigated with finite element method (FEM) program, ANSYS and infrared thermal measurement systems. And availability to application fields from a viewpoint about short thermal response time is discussed. In this paper, the time of three-axis accelerometer for high temperatures becoming $300^{\circ}C$ by integrated micro-heaters and temperature sensors to reduce thermal drift characteristics was analyzed as a thermal response time of this device. The simulated thermal response time (time until SOI piezoresistors actually becomes $300^{\circ}C$) of three-axis accelerometer for high temperatures with ANSYS is about 0.6s, and measured result with infrared temperature measurement systems is about 0.64s. Experimental results using infrared thermal measurement systems agreed well with these theoretical results.

• 융합보안논문지
• /
• 제18권5_1호
• /
• pp.33-43
• /
• 2018

본 논문에서는 사용자들이 탐색하고 싶은 공격의 진행경과, 공격의 연속성, 공격과 피해간의 연관관계, 차단 우선순위와 방어 대책 등의 문제들을 멀티 회전축과 방사축 구조를 갖는 시각화 인터페이스를 이용하여 해결하고자 한다. 이벤트의 발생 순서, 이벤트의 주체, 이벤트의 종류로 구조화된 멀티 회전축과 개별 이벤트 주체들의 진행경과를 나타내는 객관적 시간인 방사축을 기반으로 시계열 이벤트를 배치함으로써 보안이벤트를 효과적으로 감시 및 추적할 수 있게 한다. 제안하는 시각화 인터페이스는 전체 공격의 추이와 진행상황, 개별 공격들의 세부 내용과 연속성, 공격자와 피해자간의 연관관계 등을 종합적으로 제공하여 공격 차단 및 방어 대책이 적용가능한 실용적인 시각화 인터페이스이다.

• 한국CDE학회논문집
• /
• 제4권2호
• /
• pp.110-120
• /
• 1999

In general, turbine blades are usually machined on 5-axis NC machine. The 5-axis machining of sculptured surface offers many advantages over 3-axis machining including the faster material-removal rates and an improved surface finish. But it is difficult and time-consuming to generated interference-free 5-axis tool path. This paper describes research on the algorithm for generation of an interference-free 5-axis NC data for machining turbine blades. The approach, using the section profile derived from the intersection of cutting planes with a triangulated-surface approximation, includes (1) CL-data generation by detecting an interference-free heel angle (2) the calculation method for finding a adaptive feed-rate value, and (3) the inverse kinematics depending on the structure of 5-axis machine.

• 한국진공학회지
• /
• 제20권2호
• /
• pp.106-113
• /
• 2011

본 논문은 마이크로히터표면의 실시간 온도분표측정을 위한 마하젠더 간섭계 기반의 off-axis 디지털홀로그래피기술에 대한 것이다. 제안된 방법은 재료표면의 온도분포에 직접적인 함수인 2차원 위상 분포를 측정하고, 이를 통해 실시간으로 재료표면의 온도 map을 측정할 수 있다. 본 논문에서는 섭씨 20도에서 60도 사이의 온도구간에서 마이크로히터 표면의 위상변화와 실제표면온도가 선형적인 관계가 있음을 실험적으로 보였다. 제안된 방법은 재료표면의 온도분포를 실시간으로 측정하고자 하는 다양한 응용분야에 적용될 수 있을 것으로 기대된다.

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.147-159
• /
• 1995

This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.

• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.47-54
• /
• 2007

This paper describes the development of the intelligent gripper with two 3-axis force sensor that can measure forces Fx, Fy, Fz simultaneously, for stably grasping an unknown object. In order to grasp an unknown object using an intelligent gripper softly, it should measure the force in the gripping direction and the force in the gravity direction, and perform the force control using the measured farces. Thus, the intelligent gripper should be composed of 3-axis force sensor that can measure forces Fx, Fy, Fz at the same time. In this paper, the intelligent gripper with two 3-axis force sensor was manufactured and its characteristic test was carried out. The fabricated gripper could grasp an unknown object stably. Also, the sensing element of 3-axis force sensor was modeled and designed with five parallel-plate beams, and 3-axis force sensor for the intelligent gripper was fabricated. The characteristic test of the made sensor was carried out.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1330-1333
• /
• 1997

In this paper, the optimal torque shaping is obtained for 3-axis rotation of a spacecraft. The true optimal 3-axis rotation of rigid spaeraft is first investigated via parameter optimization method with prescribed switching times. Input torque shape of the troque generating device mounted on the central hub is optimized using fourier Series expansion so that the spacecraft may slew while minimizing the vibration energy of flexible modes. Numerical results show that proposed method suggests a reference trahectory for open-loop control, and also verify that it can minimize the vibratory modes of the spacecraft during/after the rest-to-rest maneuver.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.482-485
• /
• 1996

We design a homing guidance law based on the proportional navigation for the fast-rolling, single-axis control missiles and analyse the misdistance of the designed guidance system. The guidance law includes a compensation scheme which compensates for the phase-shift between the commanded and achieved acceleration which is peculiar to the fast rolling airframe with single-axis control. In the error analysis of the guidance system, we calculate the misdistance with respect to the target maneuver on the 3-dimensional space via direct simulations. Also, we conduct adjoint simulation on the 2-dimensional plane in case that phase-shift is perfectly compensated. Finally we approximate the linear time-varying dynamics of the missile with autopilot to a linear time-invarient system, and as a result we can find the misdistance as a closed-form.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1316-1319
• /
• 1996

This paper proposes the algorithm for the correction of a position and orientation of small object such as chip in the precise construction process. In the past, it is general to correct position and orientation of object using human sight and simple vision sensors. But recently, researches using image processing devices have been studied to improve the corrective precision of a position and orientation of object. In this piper, maximum-axis moment and p-theta algorithm are used to correct the position and orientation. Algorithm of maximum-axis moment is widely applied to hetero-object except being applied to a perfect rectangle. This is reason that moments of the X and Y-axis are equal. Therefore, being the shape of a perfect rectangle, the object is applied to other algorithm. In the light of time problem, real-time control is as important as correction of object. To solve it, we use the DSP(Digital Signal Processing) which is far more fast than PC.