• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.115-126
• /
• 1990

This study was performed to find differences in phototaxis response of the larva, adult emergence, sex ratio and gall formation rate of Thecodiplosis japonensis Uchida et Inouye between two areas, north and south. Larvae from these two areas, Hweng-sung in north and Moo-an in south, both considered to be the sities of severe outbreak of the insect recently, were collected from the floor and transported to the entomology larboratory, Won-Kwang University in Iri, then overwintered. These larvae were used for various experimental purposes on various dates. The following results were obtained. 1. The sizes of larvae reached 2.45 in length, 0.70 in width for north, and 2.50 in length, 0.72 in width for sourth. It seems that the differents were not significant. 2. It is known that Leaving gall of larvae to the ground for the hibernation usually occurs on rainy days. For the larvae dispersion, the phototaxis response of the larvae was hypothesized. To check this, the author manipulated some different illumination intensities adjusting the distance between the glass tube in which 100 larvae were contained and electric bulb. The glass tubes were blackened all but except a small portion. The phototaxis responses between two areas seemed to be different particularly at low light intensities, 45, 145 and 1000 lux, The larvae from north assembled to the clear portion of the glass tube were more than 30 out of 100, however less than 30 in south sample regardless of the time passage. In either cases, the saturation points came after about 8 to 10 hours. If temperature units were used, the phototaxis curve= after 1 hour illumination between two areas provided significant differences. 3. The adult emergence of south area was lagged 10 days later than that of north area. The accumulated effective day-degrees of temperature for adult emergence were $934^{\circ}C$ for north area and $1180^{\circ}C$ for south area. The emerging duration of north area appeared to be in late May through the early of July and the peak emergence occurred in middle June that was approximately 15days earlier than that of south area. The sex ratio of female to male, regardless of area, was approximately 3 : 1. 4. The rates of gall formation of the red pine(Pinus densiflora Siebold et Zuccarini), 6-year-old seedlings, were as low as 9.94% for north area and 8.87% for south area. Through the close observation, the author presumed that the population reduction was greatly affected during the prepupa stage by relative moisture content and predators, such as spiders and ants presented on the ground.

• (The)Study of the Eastern Classic
• /
• no.73
• /
• pp.445-473
• /
• 2018

This article deals with the reason for translating Korean Chinese written classics and the image of the person performing the translation. The scope of the research was restricted to South Korea and the translation value of translating the Korean classical texts from the 1960s to the 2018. In the 1960s and 1970s, the discourse of national culture and the Classical Sinology(漢學) discourse centered around the Minjokmunwhachujinhwe(民族文化推進會, National Culture Promotion Association). The discourse of the national culture was paired with the modernization, and the discourse of Classical Sinology(漢學) discourse was a certain antagonism to the discourse of modernization. The translator stereotype in this periods was close to a Classical Sinology(漢學) who could wright Korean letters. The discourse of the national culture led to the establishment of The Academy of Korean Studies by pairing with the discourse of the spiritual culture, and then changed into Korean study discourse in the 1980s. Since the mid 80s, the theory of translation has been introduced byo Kim Yong-ok. The translation of the Chosun dynasty annals, which started in the 70s, made the classical translation discourse in the classical translation field into the national project efficiency discourse. To the Early achievement of state-led gigantic project through group translation, they emphasized coherence and efficiency. On the contrary, the individuality of the translators and aspects of in-depth research have weakened. This discourse also influenced until the early 2000s. These large translation projects were produced by professional translator group. With the establishment of the Institute for the Translation of Korean Classics(Hankuk Kojon Bunyukwon) in 2007, he foundation for the stability of the classical translation business was established, and the classical translation discourse was shifted to the academic discourse centered on classical translation sudies. This discussion was expanded to the request of the establishment of an academic institution called the Classical Translation Graduate School, with a discussion on the academic identities of classical translation studies. The imagies of translators, paired with the academic discourse of this period, and that the classical translators must be classical scholars and translators, are begun to be requested. Thus, the classical translation value discourse changed with the passage of time, and the imagies of classical translators have been changed accordingly.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.242-281
• /
• 2010

There are a large number of Buddhist cultural relics in Mt. Namsan. The cultural relics carry the spirit of people of Shila who dream of Buddhist Elysium and the establishment of Buddhist nation. In the valley and the top of the mountain and on various rock cliff, stone statues of Buddha and stone pagodas stand in harmony with nature. For that reason, Mt. Namsan is called an open-air museum. And it played an important role in establishing 'The UNESCO World Heritage' status for Gyeongdju in December 2000. But sadly, there are many stone relics that have eroded away and damaged from collapsing in the passage of time. The seated stone statue of Buddha in Samreoung valley of Mt. Namsan is one of them. It was created between the 8th and 9th century, and restored without much care nor extensive historical research in 1923. As a result, The face of the Buddha remained with concrete mortar and its nimbus fallen backward and destroyed. Therefore, restoration and repair as well as creation of a statue environment for the statue were urgent. So we immediately started in restoration and repair. First, through the archaeological excavation around the stone Buddha, we carried the stone Buddha on the original position. In order to restore the statues to its original glory created by the Unified Shila Dynasty, we created a restoration plan in corporation with art historians and historians, then restored the jaw and the damage nimbus. Second, we made the weathering & damage map of the stone Buddha. In order to prevent second damage, we cleaned the surface of contaminants with distilled water. Third, we studied restoration method to prevent artificial damage. We recreated parts of his face and halo. Then each parts of the statue were restored to their original position. In the whole process of restoration, we tried to use traditional techniques.

• Journal of Astronomy and Space Sciences
• /
• v.36 no.1
• /
• pp.21-33
• /
• 2019

This paper focuses on the interpretation of radiation fluxes from active galactic nuclei. The advantage of positron annihilation spectroscopy over other methods of spectral diagnostics of active galactic nuclei (therefore AGN) is demonstrated. A relationship between regular and random components in both bolometric and spectral composition of fluxes of quanta and particles generated in AGN is found. We consider their diffuse component separately and also detect radiative feedback after the passage of high-velocity cosmic rays and hard quanta through gas-and-dust aggregates surrounding massive black holes in AGN. The motion of relativistic positrons and electrons in such complex systems produces secondary radiation throughout the whole investigated region of active galactic nuclei in form of cylinder with radius R= 400-1000 pc and height H=200-400 pc, thus causing their visible luminescence across all spectral bands. We obtain radiation and electron energy distribution functions depending on the spatial distribution of the investigated bulk of matter in AGN. Radiation luminescence of the non-central part of AGN is a response to the effects of particles and quanta falling from its center created by atoms, molecules and dust of its diffuse component. The cross-sections for the single-photon annihilation of positrons of different energies with atoms in these active galactic nuclei are determined. For the first time we use the data on the change in chemical composition due to spallation reactions induced by high-energy particles. We establish or define more accurately how the energies of the incident positron, emitted ${\gamma}-quantum$ and recoiling nucleus correlate with the atomic number and weight of the target nucleus. For light elements, we provide detailed tables of all indicated parameters. A new criterion is proposed, based on the use of the ratio of the fluxes of ${\gamma}-quanta$ formed in one- and two-photon annihilation of positrons in a diffuse medium. It is concluded that, as is the case in young supernova remnants, the two-photon annihilation tends to occur in solid-state grains as a result of active loss of kinetic energy of positrons due to ionisation down to thermal energy of free electrons. The single-photon annihilation of positrons manifests itself in the gas component of active galactic nuclei. Such annihilation occurs as interaction between positrons and K-shell electrons; hence, it is suitable for identification of the chemical state of substances comprising the gas component of the investigated media. Specific physical media producing high fluxes of positrons are discussed; it allowed a significant reduction in the number of reaction channels generating positrons. We estimate the brightness distribution in the ${\gamma}-ray$ spectra of the gas-and-dust media through which positron fluxes travel with the energy range similar to that recorded by the Payload for Antimatter Matter Exploration and Light-nuclei Astrophysics (PAMELA) research module. Based on the results of our calculations, we analyse the reasons for such a high power of positrons to penetrate through gas-and-dust aggregates. The energy loss of positrons by ionisation is compared to the production of secondary positrons by high-energy cosmic rays in order to determine the depth of their penetration into gas-and-dust aggregations clustered in active galactic nuclei. The relationship between the energy of ${\gamma}-quanta$ emitted upon the single-photon annihilation and the energy of incident electrons is established. The obtained cross sections for positron interactions with bound electrons of the diffuse component of the non-central, peripheral AGN regions allowed us to obtain new spectroscopic characteristics of the atoms involved in single-photon annihilation.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.63-84
• /
• 2022

One of the ancient nomadic cultures, the Saka is generally regarded as an important intermediary in the ancient Eurasian cultural network. This study is the reinterpretation of the excavations conducted on the Katartobe tombs site of the Saka culture through a joint three-year-long project by the National Research Institute of Cultural Heritage in Korea in collaboration with the Cultural Heritage Research Institute under the National Museum of the Republic of Kazakhstan. The main discussion of the study deals with the burial rituals performed by the community who built the Katartobe tombs by the comparison and review of the various researches on the Saka tombs based on the archaeological artifacts discovered during excavation. The research has shown that the Saka tribes maintained the tradition of burying domesticated animals, such as horses, with its owner and performed burial rituals which often involved the use of fire. The archaeological remains of the Saka also show that the burial rituals like these formed the key aspect of their cultural heritage. The archaeological discoveries also show that the Saka mourners built wooden cists under a single mound when they needed to bury multiple corpses at once and sustained the practice of excarnation when burying the bodies of those who died in the different periods of time. Some burials included a tomb passage which was used not only for carrying the deceased but also for a separate burial ritual. The main discussion of this study also deals with the remnants of bones of animals buried with their deceased owners in the same kurgan, as well as the animal species and their locations in the kurgan, resulting in the discovery of diverse meanings connected with them. The pottery buried in the tombs were largely ceremonial offering vessels, just like others excavated at nearby Saka tombs and located around the buried corpse's head facing toward the west. The excavation of the tombs also shows that two vessels were arranged at the corners of the coffin where the feet are located, revealing the characteristic features of the burial practices maintained by the tribe who built the Katartobe tombs. It may be too early to come to a definite conclusion on the burial practices of the Saka due to the relative lack of research on the kurgans across Central Asia. Excavations so far show that the kurgans clustered in a single archaeological site tend to display differences as well as uniformities. In conclusion, the ancient Central Asian tombs need more detailed surveys and researches to be able to make strides in an effort to restore the cultural heritage of the ancient Central Asian tribes who played a crucial role in the Eurasian cultural landscape.

• (The) Research of the performance art and culture
• /
• no.39
• /
• pp.393-413
• /
• 2019

As one of a shaman song to reveal features of the byeolsin rite, East Sea coast, Gyeongbuk, Korea is matgut have been discussed for a long time. The rite is held to greet other shamans who were invited by a village resident and the highest shaman to perform the rite. When there is no highest shaman in the village, or when the highest shaman lacks the ability to perform the exorcism, other shamans are invited if a person is required to meet the scale of the rite, which is a rite of passage to verify their abilities and to become a community, even while the byeolsingut is held. The best shaman team, or village Pungmul team, and shaman team, When the strings are between them, they play music and struggle with each other, and the strings are lifted, they greet the god of the game at the altar, and the shaman turns around and plays with the field. However, the process of greeting the shaman at the exorcism rite after 2000 and the procedure of "Paggi-bogi" in which shamans take turns singing songs are disappearing. In addition, although the village Pungmul team has participated in the rite as a welcoming party for the shaman team, the purpose of the rite, which is to greet the shaman, is also being tarnished by leaving the role of the village Pungmul team to the outside team. This is due to changes in the villagers' perception of gut and shaman. As in the old days, it was necessary to greet a shaman as a rite of worship, although it was not necessary to confirm its ability to perform the rite of the village, due to the disparity of status. However, after the shaman has been transformed from a 'mysterious' existence into an intangible cultural asset functional owner, the perception of shaman changes and the village confirms the shaman's ability through an intangible cultural asset certificate. In addition, the number of villagers who know the details of the rite is decreasing, and most of the tasks such as preparation and proceedings of the rite are delegated to the shaman to hold the byeolsingut, and the nature of the exorcism of the exorcism is changing.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.13-19
• /
• 2024

An analysis of the coastal water temperature in the Tongyeong waters, the eastern sea of the South Sea of Korea, revealed that the water temperature rose sharply before the typhoon made landfall. The water temperature rise occurred throughout the entire water column. An analysis of the sea surface temperature data observed by NOAA(National Oceanic and Atmospheric Administration) satellites, indicated that sea water with a temperature of 30℃ existed in the eastern waters of the eastern South Sea of Korea before the typhoon landed. The southeastern sea of Korea is an area where ocean currents prevail from west to east owing to the Tsushima Warm Current. However, an analysis of the satellite data showed that seawater at 30℃ moved from east to west, indicating that it was affected by the Ekman transport caused by the typhoon before landing. In addition, because the eastern waters of the South Sea are not as deep as those of the East Sea, the water temperature of the entire water layer may remain constant owing to vertical mixing caused by the wind. Because the rise in water temperature in each water layer occurred on the same day, the rise in the bottom water temperature can be considered as owing to vertical mixing. Indeed, the southeastern sea of Korea is a sea area where the water temperature can rise rapidly depending on the direction of approach of the typhoon and the location of high temperature formation.

• Korean Business Review
• /
• v.21 no.2
• /
• pp.137-170
• /
• 2008

This study is presenting the logistics strategy in the international logistics markets which makes competition and corporation among north-east Asian countries to establishing the multi-pass Eurasian railroads. The countries located in north-east area of Eurasia like China, Japan, Russia and Korea are paying higher costs and disutility to the transportations and communications due to repeated conflicts and confrontations causes from the politic problems. They are being used surface transportation for most of all logistics between Europe and Asia except special merchandises because of characteristic of cargo to be air, the Silk Road remains vestige only which was main logistic passage to this area since BC. So far the Trans-Siberian Railway is being used by Russia mostly as north of Eurasian transport because of difficulties of service. The Trans-China Railway built in 1992 is not accomplishing as a international logistic passages. It is expected to take a long lead time because of characteristic of resource development and poor logistic infrastructure to the countries like Uzbekistan, double landlocked country, Mongolia and Azerbaijan, the countries do not be adjacent to the sea, even they have great economic jump-up plans through the development of their own resources. The Shanghai Cooperation Organization(SCO) start to sail officially in 2001 is constructed with China, Russia, Tadzhikistan, Kyrgyzstan, Kazakhstan and Uzbekistan as regular members of 6 countries and Mongolia, India, Pakistan, Afghanistan and Iran as observers 5 countries. It is started as a military alliance to protect terror, but now, it is expended to cooperate with the traffic, transportation, trade and share of energies. The Russia is doing their best to activate TSR as a government target to developnorth area equivalently, and economic develop of far-east Siberia. And also it is agreed provisionally to improve and repair of rail road between Nahjin and Hassan to connect TSR and TKR( Trans-Korea Railroad) by Russia, North Korea and South Korea with Russian's aggressive efforts. The development plan of this area is over lapped with GTI(Greater Tumen Initiative) promoted by UNDP, and is a cooperated project by 5 countries of South Korea, Mongolia, China, Russia and North Korea, subject to review the appropriation of energy, tour, environment, rail road connection between Mongolia and China and establishing a ferry route to north-east Asia. It is Japanese situation to pay attention to Russia and China even they have been supplying large-scope of infrastructure in Mongol area without any charges, target to get East Asia Main Rail Road to connect Mongolia and Zalubino of Russia. In case of the program for the Denuclearization of North Korea is not creeping, it will be accelerated to connect the TKR and TSR, TKR and TCR by somehow attending United States, including developing program promoted by UN ESCAP. As the result, Korean peninsular will continue the central role of competition and cooperation as in the past, now and future of north-east Asia, as of geographical-economics and geographical-politics whether it is requested or not wanted by neighbor countries.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.455-486
• /
• 2015

The 3D printing technology, which started from the patent registration in 1986, was a technology that did not attract attention other than from some companies, due to the lack of awareness at the time. However, today, as expiring patents are appearing after the passage of 20 years, the price of 3D printers have decreased to the level of allowing purchase by individuals and the technology is attracting attention from industries, in addition to the general public, such as by naturally accepting 3D and to share 3D data, based on the generalization of online information exchange and improvement of computer performance. The production capability of 3D printers, which is based on digital data enabling digital transmission and revision and supplementation or production manufacturing not requiring molding, may provide a groundbreaking change to the process of manufacturing, and may attain the same effect in the character merchandise sector. Using a 3D printer is becoming a necessity in various figure merchandise productions which are in the forefront of the kidult culture that is recently gaining attention, and when predicting the demand by the industrial sites related to such character merchandise and when considering the more inexpensive price due to the expiration of patents and sharing of technology, expanding opportunities and sectors of employment and cultivating manpower that are able to engage in further creative work seems as a must, by introducing education courses cultivating manpower that can utilize 3D printers at the education field. However, there are limits in the information that can be obtained when seeking to introduce 3D printers in school education. Because the press or information media only mentions general information, such as the growth of the industrial size or prosperous future value of 3D printers, the research level of the academic world also remains at the level of organizing contents in an introductory level, such as by analyzing data on industrial size, analyzing the applicable scope in the industry, or introducing the printing technology. Such lack of information gives rise to problems at the education site. There would be no choice but to incur temporal and opportunity expenses, since the technology would only be able to be used after going through trials and errors, by first introducing the technology without examining the actual information, such as through comparing the strengths and weaknesses. In particular, if an expensive equipment introduced does not suit the features of school education, the loss costs would be significant. This research targeted general users without a technology-related basis, instead of specialists. By comparing the strengths and weaknesses and analyzing the problems and matters requiring notice upon use, pursuant to the representative technologies, instead of merely introducing the 3D printer technology as had been done previously, this research sought to explain the types of features that a 3D printer should have, in particular, when required in education relating to the development of figure merchandise as an optional cultural contents at cartoon-related departments, and sought to provide information that can be of practical help when seeking to provide education using 3D printers in the future. In the main body, the technologies were explained by making a classification based on a new perspective, such as the buttress method, types of materials, two-dimensional printing method, and three-dimensional printing method. The reason for selecting such different classification method was to easily allow mutual comparison of the practical problems upon use. In conclusion, the most suitable 3D printer was selected as the printer in the FDM method, which is comparatively cheap and requires low repair and maintenance cost and low materials expenses, although rather insufficient in the quality of outputs, and a recommendation was made, in addition, to select an entity that is supportive in providing technical support.