• 한국분무공학회지
• /
• 제18권3호
• /
• pp.132-139
• /
• 2013

Smoke emissions from light duty diesel vehicles were measured using light extinction method with the free acceleration test mode. The smoke emissions for each measurement cycle of the free acceleration method showed large variations according to driver's pedal pushing pattern. The smoke values for each measurement cycle initially increased and reach a peak value. Integration of the smoke emissions with time for each measurement cycle was performed to get a representative smoke value which was obtained by averaging the integrated results. Two kinds of integration time range were used. One is range over the whole measurement cycle of the free acceleration method. The other is only the acceleration range in the measurement cycle. Overall, variation of the representative smoke values obtained by the integration method was reduced comparing to the traditional representative smoke value which was obtained from a peak smoke value over the measurement cycle. Ten vehicles of the same model with 2.5 liter diesel engines, and seven vehicles of the same model with 2.7 liter diesel engines, were tested using the free acceleration test method.

• KDI Journal of Economic Policy
• /
• 제43권3호
• /
• pp.33-53
• /
• 2021

The import content of exports (ICE) is defined as the amount of foreign input embodied in one unit of export, and it has been used as a measure of the degree of integration into the global production network. In this paper, we suggest an alternative measure based on the decomposition of gross output and imports into the contributions of final demand terms. This measure considers the manner in which a country manages its domestic production base (gross output) and utilizes the foreign sector (imports) simultaneously and can thus be regarded as a more comprehensive measure than ICE. Korea's input-output tables in 1970-2018 are used in this paper. These tables were rearranged according to the same 26-industry classification so that these measures can be computed with time-series continuity and so that the results can be interpreted clearly. The results obtained in this paper are based on extended time-series data and are expected to be reliable and robust. The suggested indicators were applied to these tables, and, based on the results we conclude that the overall importance of the global economy in Korea's economic strategy has risen and that the degree of Korea's integration into the global production network increased over the entire period. This paper also shows that ICE incorrectly measures the movement of the degree of integration into the global production network in some periods.

• 융합경영연구
• /
• 제4권4호
• /
• pp.25-28
• /
• 2016

In this paper we expand on the notion of "integration" in terms of the variety of ways in which it would manifest itself in business education. Our main argument is that "integration" is multidimensional and has been manifest in pedagogy, research and service dimensions of university programs for a long time. However, assessments of "integration" efforts have been spotty thus far and only recently are being formalized. We present several examples in business curriculum and with increased focus on formal assessments of "integration" efforts, business education will become more pragmatic. The goal of this paper is to unpack the broad construct of "integration," and discuss its historical and current manifestations in business education. Ultimately, we conclude that while the process of integrative thinking is well underway for a long time in business education, the assessment of outcomes of integrative thinking is just taking root through formal ETS tests. We believe that integrative thinking in business education is an ultimate indicator of the effectiveness of the business curriculum, as students skilled in this area will be best prepared for the real-life jobs in the market place.

• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1907-1916
• /
• 2003

During decades, there has been much progress in understanding of the inelastic behavior of the materials and numerous inelastic constitutive equations have been developed. The complexity of these constitutive equations generally requires a stable and accurate numerical method. To obtain the increment of state variable, its evolution laws are linearized by several approximation methods, such as general midpoint rule(GMR) or general trapezoidal rule(GTR). In this investigation, semi-implicit integration schemes using GTR and GMR were developed and implemented into ABAQUS by means of UMAT subroutine. The comparison of integration schemes was conducted on the simple tension case, and simple shear case and nonproportional loading case. The fully implicit integration(FI) was the most stable but amplified the truncation error when the nonlinearity of state variable is strong. The semi-implicit integration using GTR gave the most accurate results at tension and shear problem. The numerical solutions with refined time increment were always placed between results of GTR and those of FI. GTR integration with adjusting midpoint parameter can be recommended as the best integration method for viscoplastic equation considering nonlinear kinematic hardening.

• 경영과학
• /
• 제30권1호
• /
• pp.15-24
• /
• 2013

We consider the single machine scheduling problem with a rate-modifying activity and time-dependent deterioration after the activity. The class of scheduling problems with rate-modifying activities and the class of scheduling problems with time-dependent processing times have been studied independently. However, the integration of these classes is motivated by human operators of tasks who has fatigue while carrying out the operation of a series of tasks. This situation is also applicable to machines that experience performance degradation over time due to mal-position or mal-alignment of jobs, abrasion of tools, and scraps of operations, etc. In this study, the integration of the two classes of scheduling problems is considered. We present a mathematical model to determine job-sequence and a position of a rate-modifying activity for the integration problem. Since the model is difficult to solve as the size of real problem being very large, we propose genetic algorithms. The performance of the algorithms are compared with optimal solutions with various problems.

• 한국콘텐츠학회논문지
• /
• 제11권5호
• /
• pp.260-269
• /
• 2011

본 연구는 감각처리능력에 문제를 갖는 지적장애 아동에게 감각통합활동의 자발적 수행능력을 동영상을 통해 증진시키고자 하였다. 이 연구는 4명의 지적장애아동을 대상으로 개별실험 연구방법 중 A-B-A 디자인이 사용되었다. 독립변인은 아동이 4개의 감각통합활동을 8분간 자발적으로 수행하는 장면의 동영상을 주 2회 시청하도록 하였다. 종속변인은 1)감각통합활동의 자발성과 과제 수행율, 2) 일반적 과제 (grooved pegboard) 수행시간이었다. 동영상을 통해 자발성 부족으로 감각통합활동을 스스로 수행하지 않았던 지적장애 아동의 자발성과 과제 수행율이 향상되었고, 동영상 중재방법이 지적장애 아동의 교육에 효과적임을 확인할 수 있었다. 앞으로는 다양한 질환의 아동에게 동영상을 치료에 적용하여 그 효과에 대한 연구들이 지속적으로 이루어지길 기대해본다.

• Structural Engineering and Mechanics
• /
• 제75권3호
• /
• pp.357-367
• /
• 2020

The objective of this article is investigation of dynamic response of thick multilayer functionally graded (FG) beam under generalized dynamic forces. The plane stress problem is exploited to describe the constitutive equation of thick FG beam to get realistic and accurate response. Applied dynamic forces are assumed to be sinusoidal harmonic, sinusoidal pulse or triangle in time domain and point load. Equations of motion of deep FG beam are derived based on the Hamilton principle from kinematic relations and constitutive equations of plane stress problem. The numerical finite element procedure is adopted to discretize the space domain of structure and transform partial differential equations of motion to ordinary differential equations in time domain. Numerical time integration method is used to solve the system of equations in time domain and find the time responses. Numerical parametric studies are performed to illustrate effects of force type, graduation parameter, geometrical and stacking sequence of layers on the time response of deep multilayer FG beams.

• Structural Engineering and Mechanics
• /
• 제85권4호
• /
• pp.485-500
• /
• 2023

The non-linear static analysis of reinforced concrete (RC) structures using the three-dimensional (3D) finite element method is a time-consuming and challenging task. Moreover, this type of analysis encounters numerical problems such as the lack of convergence of results in the stages of growth and propagation of cracks in the structure. The time integration analysis along with the mass scaling (MS) technique is usually used to overcome these limitations. Despite the use of this method in the 3D finite element analysis of RC structures, a comprehensive study has not been conducted so far to assess the effects of the MS method on the accuracy of results. This study aims to evaluate the accuracy of the MS method in the non-linear quasi-static finite element analysis of RC structures. To this aim, different types of RC structures were simulated using the finite element approach based on the implicit time integration method and the mass scaling technique. The influences of effective parameters of the MS method (i.e., the allowable values of increase in the mass of the RC structure, the relationship between the duration of the applied load and fundamental vibration period of the RC structure, and the pattern of applied loads) on the accuracy of the simulated results were investigated. The accuracy of numerical simulation results has been evaluated through comparison with existing experimental data. The results of this study show that the achievement of accurate structural responses in the implicit time integration analyses using the MS method involves the appropriate selection of the effective parameters of the MS method.

• 한국IT서비스학회지
• /
• 제12권3호
• /
• pp.311-321
• /
• 2013

In the community of software engineering, diverse modeling languages are used for representing all relevant information in the form of models. Also many different models such as business model, business process model, product models, interface models etc. are generated through software life cycles. In this situation, models need to be integrated for enterprise integration and enhancement of software productivity. Researchers propose rebuilding models by a specific modeling language, using a intemediate modeling language and using common reference for model integration. However, in the current approach it requires a lot of cost and time to integrate models. Also it is difficult to identify common objects from several models and to update objects in the repository of common model objects. This paper proposes software model integration using metadata model based on Linked data. We verify the effectiveness of the proposed approach through a case study.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.231-234
• /
• 2003

The Closed Control System, which uses exclusive network and protocol, have been adopted in TM/TC systems. However, the Closed Control System is known that it is not able to support the integration in the water management automation. There are two methods in integration solution in different types of TM/TC System. One solution is hardware system integration that is very expensive and impractical. The other solution is software system integration that uses OLE for Process Control(OPC). In this study, we recommend OPC solution, for KARICO water management, that is the practical and efficient. KARICO is using OPC technology in MMI(Man machine Interface) and water management program. Through this technology, the real-time status of reservoir, pumping station and canal can be achieved without difficulty.