• Fashion & Textile Research Journal
• /
• v.23 no.3
• /
• pp.323-336
• /
• 2021

This study investigated the cognitive process of fashion design images through eye activity tracking. Differences in the cognitive process and gaze activity according to image elements were confirmed. The results of the study are as follows. First, a difference was found between groups in the gaze time for each section according to the model and design. Although model diversity is an important factor leading the interest of observers, the simplicity of the model was deemed more effective for observing the design. Second, the examination of the differences by segments regarding the gaze weight of the image area showed differences for each group. When a similar type of model is repeated, the proportion of face recognition decreases, and the proportion of design recognition time increases. Conversely, when the model diversity is high, the same amount of time is devoted to recognizing the model's face in all the processes. Additionally, there was a difference in the gaze activity in recognizing the same design according to the type of model. These results enabled the confirmation of the importance of the model as an image recognition factor in fashion design. In the fashion industry, it is important to find a cognitive factor that attracts and retains consumers' attention. If the design recognition effect is further maximized by finding service points to be utilized, the brand's sustainability is expected to be enhanced even in the rapidly changing fashion industry.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.195-202
• /
• 2011

The study interprets each of three classification models based on Bath-Tub Failure Rate (BTFR), Extreme Value Distribution (EVD) and Conjugate Bayesian Distribution (CBD). The classification model based on BTFR is analyzed by three failure patterns of decreasing, constant, or increasing which utilize systematic management strategies for reliability of time. Distribution model based on BTFR is identified using individual factors for each of three corresponding cases. First, in case of using shape parameter, the distribution based on BTFR is analyzed with a factor of component or part number. In case of using scale parameter, the distribution model based on BTFR is analyzed with a factor of time precision. Meanwhile, in case of using location parameter, the distribution model based on BTFR is analyzed with a factor of guarantee time. The classification model based on EVD is assorted into long-tailed distribution, medium-tailed distribution, and short-tailed distribution by the length of right-tail in distribution, and depended on asymptotic reliability property which signifies skewness and kurtosis of distribution curve. Furthermore, the classification model based on CBD is relied upon conjugate distribution relations between prior function, likelihood function and posterior function for dimension reduction and easy tractability under the occasion of Bayesian posterior updating.

• The Korean Journal of Applied Statistics
• /
• v.37 no.2
• /
• pp.255-263
• /
• 2024

GDP represents the total market value of goods and services produced by all economic entities, including households, businesses, and governments in a country, during a specific time period. It is a representative economic indicator that helps identify the size of a country's economy and influences government policies, so various studies are being conducted on it. This paper presents a GDP growth rate forecasting model based on a dynamic factor model using key macroeconomic indicators of G20 countries. The extracted factors are combined with various regression analysis methodologies to compare results. Additionally, traditional time series forecasting methods such as the ARIMA model and forecasting using common components are also evaluated. Considering the significant volatility of indicators following the COVID-19 pandemic, the forecast period is divided into pre-COVID and post-COVID periods. The findings reveal that the dynamic factor model, incorporating ridge regression and lasso regression, demonstrates the best performance both before and after COVID.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.50-63
• /
• 2017

While transit is inconvenient, it is also inevitable for the efficient public transportation. Reducing the number of transfers as much as possible is most important in providing the convenience of public transportation and facilitating the public transportation. As for the public transportation card data, 61,986 items on weekdays and 69,100 items on weekends were collected. Pattern analysis and traffic influence factors were analyzed using traffic data card. Trip chain results revealed that people have more transit transfers for shopping and leasure than commuting purposes on weekends and that commuting distance and time increase by 10 km and 9.9 minutes, respectively. Besides, results of the structural equation model showed that factor 1(total travel time, total travel distance), factor 2(number of people getting on and off), factor 3(transit time), and factor 4(number of bus connections, number of operations) were found to have significant effects on the number of transfers.

• Journal of Navigation and Port Research
• /
• v.39 no.5
• /
• pp.409-415
• /
• 2015

According to the globalization of world economy on distribution and sales, logistics and transportation parts are playing an important role. Especially, they have to decide what is the key factor of route choice model and how to choose the right transport route in multimodal transport system. By considering the key factors in rote choice model for freight forwarders between Mongolia and Korea, this paper propose 4 main factors: Cost, Delivery time, Freight and Logistics service with 13 sub factors. The importance of factors is surveyed base on AHP through interview with freight forwarders. In results, the empirical insights about current status of Mongolian forwarders are provided with different factors between transportation modes. Expecially, the Time factor is a role factor to choose transport route for air transportation forwarders.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.5
• /
• pp.364-370
• /
• 2000

A large-signal average model for the controlled on-time boost power factor correction(PFC) circuit is developed and subsequently linearized resulting in a small-signal model for the PFC circuit. Ac analyses are performed using the small-signal model, revealing new results new on small-signal dynamics of the PFC circuit. The analysis results and model predictions are confirmed with experimental measurements on 200W prototype PFC circuit.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.57-66
• /
• 2003

Because the Logit model easily calculates probabilities for choice alternatives and estimates parameters for explanatory variables, it is widely used as a traffic mode choice model. However, this model includes an assumption which is independently and identically distributed to the error component distribution of the mode choice utility function. This paper is a study on the estimation of the Heteroscedastic Logit Model. which mitigates this assumption. The purpose of this paper is to estimate a Logit model that more accurately reflects the mode choice behavior of passengers by resolving the homoscedasticity of the model choice utility error component. In order to do this, we introduced a scale factor that is directly related to the error component distribution of the model. This scale factor was defined so as to take into account the heteroscedasticity in the difference in travel time between using public transport and driving a car, and was used to estimate the travel time parameter. The results of the Logit Model estimation developed in this study show that Heteroscedastic Logit Models can realistically reflect the mode choice behavior of passengers, even if the difference in travel time between public and private transport remains the same as passenger travel time increases, by identifying the difference in mode choice probability of passengers for public transportation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.67-74
• /
• 1999

Self-Boring Pressuremeter Test(SBPT) is known to be the most effective in-situ test method which can reliably determine consolidation characteristics as well as deformation modules and untrained shear strength. In order to derive the coefficient of consolidation using SBPT results it is necessary to obtain the dissipation behavior from the pore pressure change with time during constant radial strain(generally 10%) and to derive the reliable time factor(Τ) from the analytical method which considers the real in-situ conditions. As previous studies on time factor are based on the assumptions of plane strain condition that the membrane of SBP is infinite, of untrained condition during the expansion of the probe and of elastic soil behavior during consolidation, these analyses can't consider the real boundary conditions and the real soil behaviour. In this study, consolidation analysis similar to real in-situ conditions including test procedure is conducted using finite element program which employs MCC model and Biot theory. Time factor considering the effects of finite membrane length, the total pressure change during consolidation and partial drainage is proposed and compared with previous results.

• Geomechanics and Engineering
• /
• v.37 no.2
• /
• pp.179-187
• /
• 2024

In this paper, a unified time-dependent constitutive model of Darcy flow and non-Darcy flow is proposed. The influencing factors of flow velocity are discussed, which demonstrates that permeability coefficient is the most significant factor. Based on this, the dynamic evolution characteristics of water inrush during tunneling through fault fracture zone is analyzed under the constant permeability coefficient condition (CPCC). It indicates that the curves of flow velocity and hydrostatic pressure can be divided into typical three stages: approximate high-velocity zone inside the fault fracture zone, velocity-rising zone near the tunnel excavation face and attenuation-low velocity zone in the tunnel. Furthermore, given the variation of permeability coefficient of the fault fracture zone with depth and time, the dynamic evolution of water flow in the fault fracture zone under the variable permeability coefficient condition (VPCC) is also studied. The results show that the time-related factor (α) affects the dynamic evolution distribution of flow velocity with time, the depth-related factor (A) is the key factor to the dynamic evolution of hydrostatic pressure.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.25-34
• /
• 2012

In this study, in the process of testing before the release of the software products designed, software testing manager in advance should be aware of the testing-information. Therefore, the effective learning effects perspective has been studied using the NHPP software. The finite failure nonhomogeneous Poisson process models presented and applied property of learning effect based on truncated time and delayed S-shaped software reliability. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is greater than autonomous errors-detected factor that is generally efficient model can be confirmed. This paper, a failure data analysis was performed, using time between failures, according to the small sample and large sample sizes. The parameter estimation was carried out using maximum likelihood estimation method. Model selection was performed using the mean square error and coefficient of determination, after the data efficiency from the data through trend analysis was performed.