• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1177-1184
• /
• 2011

Gas-to-Solid (GTS) technology is composed of three stages: hydrate production, transportation, and regasification. For efficient operation of regasification plants, it is crucial to predict the temperature and flow rate of hot water necessary to dissociate the hydrate pellets. Dissociated gas escaping from the pellet surface, when in contact with hot water, will alter the flow field and consequently alter the heat transfer rate. Methane hydrate pellet dissociation characteristics in low- to moderatetemperature water were investigated by taking images of the changes in the hydrate pellets' shapes in a pressurized reactor and measuring the total time required for complete melting of the pellets. The effects of water temperature, hydrate conversion rate, and flow speed on the dissociation completion time were also investigated. Bubbling gas released from the pellet surface induced a secondary flow that enhanced the heat transfer rate and thus decreased the dissociation time. It was also found that a considerable flow rate was needed to significantly decrease the dissociation time.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3233-3240
• /
• 2012

We demonstrated the combined applications of online protein digestion using trypsin immobilized enzyme reactor (IMER) and dual tandem mass spectrometry with collisionally activated dissociation (CAD) and electron transfer dissociation (ETD) for tryptic peptides eluted through the trypsin-IMER. For the trypsin-IMER, the organic and inorganic hybrid monolithic material was used. By employing the trypsin-IMER, the long digestion time could be saved with little or no sacrifice of the digestion efficiency, which was demonstrated for standard protein samples. For three model proteins (cytochrome c, carbonic anhydrase, and bovine serum albumin), the tryptic peptides digested by the IMER were analyzed using LC-MS/MS with the dual application of CAD and ETD. As previously shown by others, the dual application of CAD and ETD increased the sequence coverage in comparison with CAD application only. In particular, ETD was very useful for the analysis of highly-protontated peptide cations, e.g., ${\geq}3+$. The combination approach provided the advantages of both trypsin-IMER and CAD/ETD dual tandem mass spectrometry applications, which are rapid digestion (i.e., 10 min), good digestion efficiency, online coupling of trypsin-IMER and liquid chromatography, and high sequence coverage.

• Mass Spectrometry Letters
• /
• v.2 no.1
• /
• pp.24-27
• /
• 2011

Hyperthermal ion/surface collisions of bromotoluene radical cations were studied using perfluorinated (F-SAM) and hydroxyl-terminated (OH-SAM) self-assembled monolayer surfaces in a tandem mass spectrometer with BEEQ geometry. The isomers were differentiated by ion abundance ratios taken from surface-induced dissociation (SID). The dissociation rate followed the order of ortho > meta > para isomers. The peak abundance ratio of m/z 51 to m/z 65 showed the best result to discern the isomers. A dissociation channel leading to tolylium ion was suggested to be responsible for the pronounced isomeric differences. The capability of SID to provide high-energy activation with narrow internal energy distribution may have channeled the reaction into the specific dissociation pathway, also facilitating small differences in reaction rates to be effective in the spectral time window of this experiment. All of the molecular ions experiencing reactive collisions with the F-SAM surface undergo transhalogenation, in which a fluorine atom on the surface replaces the bromine in the incoming ions. This reactive collision was dependent on the laboratory collision energy occurring in ca. 40.75 eV range.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.619-623
• /
• 2007

Synthesis of 4-substituted 3-exo-methylenechroman derivatives was carried out by the n-Bu3SnH-mediated vinyl radical cyclization as the key step starting from various salicylaldehydes.

• Journal of Animal Reproduction and Biotechnology
• /
• v.38 no.1
• /
• pp.10-16
• /
• 2023

Intermuscular fat is essential for enhancing the flavor and texture of cultured meat. Mesenchymal stem cells derived from intermuscular adipose tissues are a source of intermuscular fat. Therefore, as a step towards developing a platform to derive intermuscular fat from mesenchymal stem cells (MSCs) for insertion between myofibrils in cultured beef, an advanced protocol of intermuscular adipose tissue dissociation effective to the isolation of MSCs from intermuscular adipose tissues was developed in cattle. To accomplish this, physical steps were added to the enzymatic dissociation of intermuscular adipose tissues, and the MSCs were established from primary cells dissociated with physical step-free and step-added enzymatic dissociation protocols. The application of a physical step (intensive shaking up) at 5 minutes intervals during enzymatic dissociation resulted in the greatest number of primary cells derived from intermuscular adipose tissues, showed effective formation of colony forming units-fibroblasts (CFU-Fs) from the retrieved primary cells, and generated MSCs with no increase in doubling time. Thus, this protocol will contribute to the stable supply of good quality adipose-derived mesenchymal stem cells (ADMSCs) as a fat source for the production of marbled cultured beef.

• Journal of the Korean Institute of Gas
• /
• v.19 no.3
• /
• pp.54-59
• /
• 2015

The gas hydrate of 10 trillion tons are buried under continental slope in the world(permafrost : 2%, marine continental slope: 98%), but technology for the the commercial gas recovery has not developed yet. There are normally four representative recovery methods: depressurization method, thermal stimulation method, inhibition injection method, and displacement method. This study focuses on change of dissociation time and gas production according to gas hydrate saturation rate and depressurization rate. It was found that the correlation between depressrization rate and dissociation time was like as $Y=0.0004X^2-0.499X+176.86$. It was also found that the bigger depressurization rate is, the better production is(methane gas is produced over 46.2% at depressurization rate 50% compared with 40%). However, on the contrary to this, it is presumed that gas production is decreased at 60% due to gas hydrate reformation.

• New & Renewable Energy
• /
• v.2 no.3
• /
• pp.37-41
• /
• 2006

In this study, an experimental apparatus has been designed and set up to analyze the dissociating phenomena of hydrate in porous rock. Experiments with the depressurization scheme have been carried out to investigate the dissociation characteristics of methane hydrates and the productivities of dissociated gas and water. From the experiments, it has been provided a determination of volume of gas produced and the progress of the dissociation front, as a function of time when hydrate is depressurized. Also, it has been investigated the flowing behavior of the dissociated gas and water in porous rock and the efficiency of the production

• Journal of Industrial Technology
• /
• v.40 no.1
• /
• pp.25-32
• /
• 2020

In this study, the effects of thermodynamic hydrate inhibitors on hydrate formation and dissociation behaviors were identified. The nucleation and growth of CP hydrate in the presence of methanol were monitored by optical microscope. Cyclopentane was used to demonstrate the oil phase in the pipeline in this study. Hydrate morphology, required time for hydrate formation, hydrate dissociation temperature were also identified by experiments. With the addition of methanol in water solution, the hydrate nucleation as well as hydrate growth were delayed. Moreover, hydrate morphology was also varied with the addition of methanol. Hydrate formation and dissociation temperature also decrease as the concentration of methanol increases.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.412-414
• /
• 2006

In this study, an experimental apparatus has been designed and set up to analyze the dissociating phenomena of hydrate in porous rock. Experiments with the depressurization ion scheme have been carried out to investigate the dissociation characteristics of methane hydrates and the productivities of dissociated gas and water. From the experiments, it has been provided a determination of volume of gas produced and the progress of the dissociation front, as a function of time when hydrate is depressurized. Also, it has been investigated the flowing behavior of the dissociated gas and water in porous rock and the efficiency of the production

• Bulletin of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.267-270
• /
• 2002

Photodissociations of o-, m-, and p-iodotoluene radical cations were investigated by using Fourier-transform ion cyclotron resonance (FT-ICR) spectrometry. Iodotoluene radical cations were prepared in an ICR cell by a photoionization charge-transfer method. The time-resolved one-photon dissociation spectra were obtained at 532 nm and the identities of $C_7H_7^+$ products were determined by examining their bimolecular reactivities toward toluene-$d_8$. The two-photon dissociation spectra were also recorded in the wavelength range 615-670 nm. The laser power dependence, the temporal variation, and the identities of $C_7H_7^+$ were examined at 640 nm. The mechanism of unimolecular dissociation of iodotoluene radical cations is elucidated: the lowest barrier rearrangement channel leads exclusively to the formation of the benzyl cation, whereas the direct C-I cleavage channel yields the tolyl cations that rearrange to both benzyl and tropylium cations with dissimilar branching ratios among o-, m-, and p-isomers. With a two-photon energy of 3.87 eV at 640 nm, the direct C-I cleavage channel results in the product branching ratio, [tropylium cation]/[benzyl cation], in descending order, 0.16 for meta >0.09 for ortho >0.05 for para.