• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.74-81
• /
• 2013

Due to its accuracy and efficiency, reduced kinetic mechanism of diesel surrogate is widely used as fuel model when applying 3-D diesel engine simulation. But for the well-developed prediction of diesel surrogate reduced kinetic mechanism, it is important to know some meaningful factors which affect to ignition delay time. Meanwhile, ignition delay time consists of two parts. One is the chemical ignition delay time related with the chemical reaction, and the other is the physical ignition delay time which is affected by physical behavior of the fuel droplet. Especially for chemical ignition delay time, chemical properties of each fuel were studied for a long time, but researches on their mixtures have not been done widely. So it is necessary to understand the chemical characteristics of their mixtures for more precise and detailed modeling of surrogate diesel oil. And it shows same ignition trend of paraffin mixture with those of single component, and shorter ignition delay at low/high initial temperature when mixing paraffin and toluene.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.23-32
• /
• 1996

This paper proposes a new buffer management scheme to service delay-sensitive traffic and loss-sensitive traffic fairly in ATM networks. The proposed scheme uses tow buffers for delay-sensitive traffic and loss-sensitive traffic. To satisfy the average delay time of delay-sensitive traffic, cells in real-time buffer are served first. When congestion occurs in nonreal-time buffer, low loss priority cell in real-time buffer can be pushed out by high loss priority cell in nonreal-time buffer can be transferred to real-time buffer considering threshold value in real-time buffer. Using computer simulation, the existing methods and proposed scheme are compared and analyzed with respect to cell loss rate and average delay time. Simulation results show that the proposed scheme have superior performance to conventional schemes.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.187-192
• /
• 2009

This paper presents a method for designing a robust controller that alleviates disturbance effects and compensates performance degradation owing to the time-delay. Disturbance observer(DOB) approach as a tool of robust control has been widely employed in industry. However, since the Pade approximation of time-delay makes the plant non-minimum phase, the classical DOB cannot be applied directly to the system with time-delay. By using a new DOB structure for non-minimum phase systems together with the Smith Predictor, we propose a new controller for reducing the both effects of disturbance and time-delay. Moreover, the closed-loop system can be made robust against uncertain time-delay with the help of a Pill controller tuning method that is based on a second-order plus dead time modeling technique.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.3
• /
• pp.179-184
• /
• 2002

Recently, internet-based applications can be found easily in various felds. Internet-based telerobot system becomes one of important applications of internet. Among many important technological issues on the internet-based telerobot, time-delay is inherently critical problem to be solved. Time-delay is classified as micro time-delay and macro time-delay in this paper. Algorithms for compensation of path-error and time-error are proposed for the both types of time-delays using fuzzy logic since fuzzy logic is one of the best tools to represent expert's knowledge. Simulation results show the validity of the proposed algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.231-231
• /
• 2000

It is proposed that a novel method which can compensate the time delay occurs in overall system, when voltage and current is measured, owing to LPF, hysteresis control inverter and microprocessor program computation time. The Proposed scheme estimates the time delay using the difference between Q-axis stator current command and time delayed Q-axis stator current in synchronous reference frame, and compensates the time delay of voltage and current using angular displacement of DQ transformation. The proposed scheme compensates accurately the time delay occurs in overall system. Therefore performance of vector control system is improved highly and it is verified by simulation and experiment.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.5-10
• /
• 1997

In this paper, a new time delay estimation algorithm, WTD-LMSTDE was proposed. This method has great improvement in convergence rate relative to the time domain approach by decreasing the eigen value spread of input signal autocorrelation matrix. The performance of the algorithm was evaluated for the cases of time invariant time delay and time varying time delay. In the case of time invariant time delay, the estimation accuracy of WTD-LMSTDE was better than that of LMSTDE from 3.3% to 12.5% with respect to SNR. In the case of time varying time delay, the mean error power of WTD-LMSTDE in linear increased delay environment was decreased about 2.4dB compared to that of LMSTDE under noise-free condition. As a result, we showed that the performance of WTD-LMSTDE is better than of LMSTDE.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.162-166
• /
• 2007

In this paper, we propose a WDM optical true time-delay (OTTD) beam former for phased way antenna (PAA) systems. It is composed of a delay lines matrix and a multiwavelength source with discrete DFB laser diodes. The building block of a delay lines matrix is a $2\times2$ optical MEMS switch with proper fiber-optic delay line connected between cross ports. A $4\times3$ matrix using four DFB lasers has been fabricated with unit time-delay difference of 12 ps. Maximum time-delay error was measured to be -1.74 ps and +1.14 ps at a radiation angle of $46.05^{\circ}$, corresponding to error range of $-2.87^{\circ}\sim+1.88^{\circ}$. By measuring time-delays at six different RF frequencies from 5- to 10-GHz, we verified the true time-delay characteristic of our OTTD.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1744-1746
• /
• 2004

This paper focuses on the problem of asymptotic stabilization for time-delay systems. To this end, a memoryless state feedback controller is proposed. Then, based on the Lyapunov method, a delay-dependent stabilization criterion is devised by taking the relationship between the terms in the Leibniz-Newton formula into account. Certain free weighting matrices are used to express this relationship and linear matrix inequalities (LMIs)-based algorithm to design the controller stabilizing the system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.620-624
• /
• 2011

This paper propose a new delay-dependent stability criterion of neutral time-delay systems. By employing double-integral terms in augmented states and constructing a new Lyapunov-Krasovskii's functional, a delay-dependent stability criterion is established in terms of Linear Matrix Inequality. Through numerical examples, the validity and improvement results obtained by applying the proposed stability criterion will be shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1906-1908
• /
• 2004

We propose a result on the stabilization of nonlinear time-delay systems via the feedback linearization method. Using the predictor based control and the parametric coordinate transformation, we introduce a stabilizing controller to compensate time delay. Specifically, we present the delay-dependent stability analysis to makes the considered system stable. Also, an illustrative example is provided