• International Journal of Control, Automation, and Systems
• /
• v.6 no.6
• /
• pp.960-967
• /
• 2008

This paper shows that design of a robustly stable repetitive control system is equivalent to that of a feedback control system for an uncertain linear time-invariant system satisfying the well-known robust performance condition. Once a feedback controller is designed to satisfy the robust performance condition, the feedback controller and the repetitive controller using the performance weighting function robustly stabilizes the repetitive control system. It is also shown that we can obtain a steady-state tracking error described in a simple form without time-delay element if the robust stability condition is satisfied for the repetitive control system. Moreover, using this result, a sufficient condition is provided, which ensures that the least upper bound of the steady-state tracking error generated by the repetitive control system is less than or equal to the least upper bound of the steady-state tracking error only by the feedback system.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.59-65
• /
• 2013

The signal broadcast from a GPS satellite experiences code delay and carrier phase advance while passing through the ionosphere, which causes a signal error. Many ionosphere models have been studied to correct this ionospheric delay error. In this paper, the ionosphere modeling for the Korean Peninsula was carried out using a spherical harmonics based model. In contrast to the previous studies, we considered a real-time ionospheric delay correction model using fewer number of basis functions. The modeling performance was evaluated by comparing with a grid model. Total number of basis functions was set to be identical to the number of grid points in the grid model. The performance test was conducted using the GPS measurements collected from 5 reference stations during 24 hours. In the test result, the modeling residual error was smaller than that of the existing grid model. However, when the number of measurements was small and the measurements were not evenly distributed, the overall trend was found to be problematic. For improving this problem, we implemented the modeling with additional virtual measurements.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.109-112
• /
• 2020

Many devices are connected on the internet to give functionalities for interconnected services. In 2020', The number of devices connected to the internet will be reached 5.8 billion. Moreover, many connected service provider such as Google and Amazon, suggests edge computing and mesh networks to cope with this situation which the many devices completely connected on their networks. This paper introduces the current state of the introduction of the wireless mesh network and edge cloud in order to efficiently manage a large number of nodes in the exploding Internet of Things (IoT) network and introduces the existing Network Time Protocol (NTP). On the basis of this, we propose a relatively accurate time synchronization method, especially in heterogeneous mesh networks. Using this NTP, multiple time coordinators can be placed in a mesh network to find the delay error using the average delay time and the delay time of the time coordinator. Therefore, accurate time can be synchronized when implementing IoT, remote metering, and real-time media streaming using IoT mesh network.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.4
• /
• pp.620-630
• /
• 2005

This paper presents a digital controller for a single phase UPS inverter under two main considerations: (i) the overall system shall keep very low AC-voltage tracking error as well as no phase delay over different load conditions, and (ii) the digital controller shall be employed at a fixed sampling time. We propose that the former can be achieved by the proposed controller using the error-state approach and the latter can be dealt with by the socalled characteristics ration assignment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.179-181
• /
• 1987

In this paper, a self-tuning controller design is proposed by using pole-zero placement method and considering a system time delay. To got better tracking for the generalized self-tuning controller, pole placement method for the closed loop system and zero placement method for the error transfer function are Introduced. The proposed method shows better efficiency than pole placement method for minimizing tracking error. Simulation gives good results in tie reference signal tracking.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.85-88
• /
• 2001

In this paper, we propose a retransmission based error control scheme in which a stop-and-wait ARQ is simultaneously performed in two adjacent layers for the node-to-node error control. We develop an analytical numerical method to calculate the probability of error remains and the moments of the high layer message delay time at steady state. Using the analytical method, we investigate the performance of double-layered ARQ scheme with respect to the properties of the employed CRC codes and the characteristics of the involved channel.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.297-306
• /
• 2012

In this paper, we propose a Time Delay Traceback Scheme for the TDOA location estimation performance enhancement in NLOS environment and analyze the performance in various conditions. We place multiple readers in a square($300m{\times}300m$) searching area for reuse of received signal. Also, we use more active NLOS reader detection methode for NLOS error mitigation. when NLOS time delay 70 m, the number of the NLOS reader is 3 and the received sub-blinks number 3, proposed time delay trace-back scheme improve the RMSE about 16 m. From these results, we confirm that the proposed time delay traceback scheme is well-suited for the high precision location estimation to offer the location based service.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.302-305
• /
• 2003

3GPP RLC protocol specification adopted an error control scheme based on selective repeat ARQ. In the 3GPP ARQ, distinctive windows are provided at transmitting and receiving stations so that those stations are prohibited to send or receive data PDU's out of window. An increase in window size enhances delay performance. Such an increase, however, raises the occupancy at re-ordering buffer, which results in a long re-ordering time. Aiming at suppressing the occupancy at re-ordering buffer, we propose partial go back N scheme in this paper In the partial go back N scheme, the receiving station regards all data PDU's between the first (lowest sequence numbered) error-detected PDU and last (highest sequence numbered) error-detected PDU. By the employment of the partial go back N scheme, the occupancy at the re-ordering buffer is apparently reduced, while the delay and throughput performance may be degraded due to the remaining properties of go back N. We thus consider peak occupancy of re-ordering buffer, mean sojourn time at re-ordering buffer, mean delay time, and maximum throughput as measures to evaluate tile proposed scheme and investigate such performance by using a simulation method. From numerical examples, we observe a trade-off among performance measures and conclude that the partial go back N scheme is able to effectively reduce the occupancy of re-ordering buffer.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1173-1196
• /
• 2014

Real-time dynamic substructuring tests have been conducted on a cable-deck system. The cable is representative of a full scale cable for a cable-stayed bridge and it interacts with a deck, numerically modelled as a single-degree-of-freedom system. The purpose of exciting the inclined cable at the bottom is to identify its nonlinear dynamics and to mark the stability boundary of the semi-trivial solution. The latter physically corresponds to the point at which the cable starts to have an out-of-plane response when both input and previous response were in-plane. The numerical and the physical parts of the system interact through a transfer system, which is an actuator, and the input signal generated by the numerical model is assumed to interact instantaneously with the system. However, only an ideal system manifests a perfect correspondence between the desired signal and the applied signal. In fact, the transfer system introduces into the desired input signal a delay, which considerably affects the feedback force that, in turn, is processed to generate a new input. The effectiveness of the control algorithm is measured by using the synchronization technique, while the online adaptive forward prediction algorithm is used to compensate for the delay error, which is present in the performed tests. The response of the cable interacting with the deck has been experimentally observed, both in the presence of delay and when delay is compensated for, and it has been compared with the analytical model. The effects of the interface delay in real-time dynamic substructuring tests conducted on the cable-deck system are extensively discussed.

• Journal of IKEEE
• /
• v.13 no.1
• /
• pp.36-40
• /
• 2009

In control of time delay systems, if the informations about the system model and the disturbance can be estimated exactly, the ideal response can be achieved by using Smith predictor controller. Therefore, in this paper, an adaptive algorithm is proposed to control time delay systems existing modelling errors and disturbance. An adaptive observer to estimate disturbance and system model is designed and adaptive laws adjusting the observer are proposed. The new Smith predictor controller is designed using the proposed adaptive observer. As a result, the proposed controller can eliminate the effects of the disturbance and the modelling error. The effectiveness and the improved performance of the proposed system are verified by computer simulation.