• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.13
• /
• pp.5359-5364
• /
• 2014

Background: To determine surgical outcomes, perioperative complications, and patient outcomes in gynecologic cancer patients undergoing robotic surgery. Materials and Methods: Surgical outcomes, including docking time, total operative time, console time, estimated blood loss (EBL), conversion rate and perioperative complications were retrospectively reviewed in 30 gynecologic cancer patients undergoing robotic surgery. Patient outcomes included recovery time and patient satisfaction, as scored by a visual analogue scale (VAS) from 0-10. Results: The operations included 24 hysterectomies with pelvic lymphadenectomy (PLD) and/or para-aortic lymphadenectomy, four radical hysterectomies with PLD, and two radical trachelectomies with PLD. Mean docking time was $12.8{\pm}9.7min$, total operative time was $345.5{\pm}85.0min$, and console time was $281.9{\pm}78.6min$. These times were decreased in the second half of the cases. There was no conversion rate. Three intraoperative complications, including one external iliac artery injury, one bladder injury, and one massive bleeding requiring blood transfusion were reported. Postoperative complications occurred in eight patients, most were minor. Only one patient had port herniation that required reoperation. Mean hospital stay was $3.5{\pm}1.7days$, and recovery time was $14.2{\pm}8.1days$. Two-thirds of patients felt very satisfied and one-third felt satisfied; the mean satisfaction score was 9.4 +0.9. Two patients with stage III endometrial cancer developed isolated port site metastasis at five and 13 months postoperatively. Conclusions: Robotic surgery for gynecologic cancer appears to be feasible, with acceptable perioperative complication rate, fast recovery time and high patient satisfaction.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.676-685
• /
• 2016

This study investigated the conversion of oil products from polystyrene by using dispersed Co and Mo catalyst on reaction time and concentration change for knowledging on characteristics at low temperature (425, 450 and $475^{\circ}C$) pyrolysis and reaction time(20~80 min, 15 min interval) in a batch reactor. It will be showed the conditions for optimum pyrolysis at reaction temperature $450^{\circ}C$ and the reaction time 35min, and the main components of the converted liquid oil were styrene and benzene derivatives by GC/MS. The oil products formed during pyrolysis were classified into gas, gasoline, kero, diesel and heavy oil according to the domestic specification of petroleum products. The pyrolysis conversion rate was showed as Co catalyst > Mo catalyst > Thermal in all reaction time at reaction temperature $450^{\circ}C$. The yields rate of gas, kerosine, diesel were the most hight at Mo Catalyst, gasoline was at thermal and heavy oil was at Co catalyst. The conversion rate and yields of the pyrolysis products were the most height when Co catalyst ratio was 100%.

• Journal of Digital Contents Society
• /
• v.12 no.2
• /
• pp.177-184
• /
• 2011

This study deals with Timing Synchronization of motion picture and music in film music's physical point of view. Timing Synchronization appears by using Click Track, which calculates time of picture and location of bar. We also can find Hit, the emphasis point of music, by computation Frame Per Beat and estimate the location of note per time. Hit can be placed at upbeat, but, because of music's characteristic, it is more convenient to composer when it's placed at downbeat. Therefore, this study suggests three methods to sync the music and picture. First of all, sync through time conversion, second of all, sync through tempo conversion, and lastly, there is way to sync through offset. These each methods have their pros and cons, so choice should be made based on the music's natural flow.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.6
• /
• pp.43-49
• /
• 2001

A reduced machining time and increased accuracy for the sculptured surface are very important when producing complicated parts. The step-size and tool-path interval are essential components in high speed and high resolution machining. If they are small, the machining time will increase, whereas if they are large, rough surfaces will be caused. In particular, the machining time, which is key in high speed machining, is affected by the tool-path interval more than the step-size. The conventional method for calculating the tool=path interval is to select a small parametric increment of a small increment based on the curvature of the surface. However, this approach also has limitations. The first is that the tool-path interval can not be calculated precisely. The second is that a separate tool-path interval needs to be calculated in each of the three cases. The third is that the conversion from Cartesian domain to parametric domain or vice versa must be necessary. Accordingly, the current study proposes a new tool-path interval algorithm that do not involve a curvature and that is not necessary for any conversion and a variable step-size algorithm for NURBS.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.717-722
• /
• 2013

The wastewater reclamation and reusing system has been rising as an alternative of water resource exhaustion that the whole world is experiencing. In order to be able to bring about improvement of the existing wastewater reclamation and reusing system, this research has developed of Conversion-Human Machine Interaction (C-HMI) based real-time control and monitoring system such as a sensor module and gate module, web monitoring system. This system was communication almost-error-free in various environment and situation. As a result, we have achieved our goal that has to doing work correctly as a sensor and gateway module that communication error is less than 0.2% throughout the embodied system and add that it can be easily controled and configured as an interface equipment to a complex sensor of water quality. According to this, the construction of a database capable of analyzing and assessing collection, storage and various elements of reliable water quality and flow rate data can be possible.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.3055-3058
• /
• 2013

Methanesulfonic acid (MSA) was used as catalyst to remove trace organic sulfur (thiophene) from Fluid Catalytic Cracking gasoline (FCC) via alkylation with olefins. The reactions were conducted in Erlenmeyer flask equipped with a water-bath under atmospheric pressure. The influence of the temperature, the reaction time, and the mass ration of MSA were investigated. After a 60 min reaction time at 343 K, the thiophene conversion of 98.7% was obtained with a mass ration of MSA to oil of 10%. The catalyst was reused without a reactivation treatment, and the thiophene conversion reached 92.9% at the third time. The method represents an environmentally benign route to desulfur, because MSA could easily be separated from the reaction mixture via decantation and it could be reused.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.2
• /
• pp.95-100
• /
• 2016

We fabricated a tin sulfide (SnS) layer with Sn/Mo/glass layers followed by a RTP (rapid thermal processing), and studied the film growth and structural characteristics as a function of annealing temperature and time. The elemental sulfur (S) was cracked thermally and applied to form SnS polycrystalline film out of the Sn percursor at pre-determined pressures in the RTP tube. The sulfurization was done at the temperature from $200^{\circ}C$ to $500^{\circ}C$ for a time period of 10 to 40 min. At ${\leq}300^{\circ}C$, 20 min., p-type SnS thin films was grown and showed the best composition of at.% of [S]/[Sn] $${\sim_=}$$ 1 and [111] preferred orientation as investigated from using XRD (X-ray diffraction) analysis and EDS (energy dispersive spectroscopy) and SEM (scanning electron microscopy), and optical absorption by a UV-VIS spectrometer. In this paper, we report the details of growth characteristics of single phase SnS thin film as a function of annealing temperature and time associated with the pressure and ambient gas in the RTP tube.

• Journal of Korean Academy of Nursing
• /
• v.41 no.3
• /
• pp.302-312
• /
• 2011

Purpose: The purpose of this study was to develop a resource-based relative value scale (RBRVS) and its conversion factor for advanced nursing practices carried out by critical care nurse practitioners (CCNP) in intensive care units. Methods: The methodology was developed by calculating CCNP's RBRVS for 32 advanced nursing services based on CCNP's workload and time spent in the context of national health insurance. A cost analysis was performed to estimate the conversion factor of CCNP's RBRVS. The share of CCNP's contribution to fee-for-service in intensive care units was also analyzed. Results: Calculation of the RBRVS of 32 advanced nursing practices showed a range of points from 100.0 to 1,181.4 and an average of 296.1 points. The relevant conversion factor for advanced nursing practices in CCNP were estimated at 37.3-48.4 won. The contribution rate of CCNP's advanced nursing practices in the relative value scale of the national health insurance was estimated at 0.1-31.3%. Conclusion: Measuring the economic value of advanced nursing services will be a basis for esta-blishing a reimbursement system for CCNP's practices and thus encourage a social demand for advanced nurse practitioners.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.85-91
• /
• 2009

Recently, the LCD has high market share in TV market. The use of motion images in portable devices like DMB, PMP and Cell Phone is growing rapidly. One of the technique of enhancing the LCD's characteristic which is the slow response time. But, the technique requires a lot of memory usage, because of the requirement of frame memory. In this paper, we propose a reduction method for the frame memory that is required for LCD overdrive. Proposed overdrive architecture based on modified DWT-Inverse DWT and Color Conversion. The proposed architecture has a considerable PSNR. At once, it uses 50% of frame memory size and reduces 15% of frame memory size compare with previous architecture. The design was implemented using Xilinx Vertex4 and had 2172 Slice except Memory.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.8
• /
• pp.43-53
• /
• 2001

Wavelength conversion devices are essential to build an expanding all-optical network, and various types of wavelength conversion techniques are being researched. Among them, wavelength conversion based on the cross phase modulation in a directionally coupled semiconductor optical amplifier has been introduced and the concept has been experimentally proved. In this paper, a split-step method is applied to properly model the mentioned wavelength converter in the time-domain and various characteristics have been analyzed. It is shown that the present modeling approach can explain the results of the reported experimental results. Furthermore the wavelength conversion is shown to be well performed when the input signal wave and the converted wave travels in the opposite direction. The simulation shows that the positive and negative chirping appear simultaneously at both the leading and trailing of edges of the optical pulse.